The Sun Cluster 3.1 - 3.2 With Sun StorEdge 3310 or 3320 SCSI RAID Array Manual for Solaris OS provides procedures specific to Sun StorEdgeTM 3310 and 3320 SCSI RAID storage devices that are placed in a Sun® Cluster environment. Use this manual with any version of Sun Cluster 3.1 or 3.2 software on SPARC based systems and with any support version of Sun Cluster 3.1 or 3.2 software on x86 based systems.
This Sun Cluster release supports systems that use the SPARC and x86 families of processor architectures: UltraSPARC, SPARC64, and AMD64. In this document, the label x86 refers to systems that use the AMD64 family of processor architectures.
Unless otherwise noted, procedures are the same for all Sun Cluster 3.1 or 3.2 versions on SPARCTM based systems and for all supported Sun Cluster 3.1 or 3.2 versions on x86 based systems.
This book is for Sun representatives who are performing the initial installation of a Sun Cluster configuration and for system administrators who are responsible for maintaining the system.
This document is intended for experienced system administrators with extensive knowledge of Sun software and hardware. Do not use this document as a planning or a pre-sales guide. You should have already determined your system requirements and purchased the appropriate equipment and software before reading this document.
The following chapters contain information about hardware used in a Sun Cluster environment.
Chapter 1, Installing and Configuring a Sun StorEdge 3310 or 3320 SCSI RAID Array discusses how to install and configure the StorEdge 3310 RAID storage array.
Chapter 2, Maintaining Sun StorEdge 3310 or 3320 SCSI RAID Array discusses how to maintain the StorEdge 3310 RAID storage array.
The following table lists the information that has been revised or added since the initial release of this documentation. The table also lists the revision date for these changes.
Table P–1 Sun Cluster 3.1 - 3.2 With Sun StorEdge 3310 or 3320 SCSI RAID Array Manual for Solaris OS
Revision Date |
New Information |
---|---|
January 2009 |
Updated links to different versions of Sun Cluster documentation in Preface. |
The following books provide conceptual information or procedures to administer hardware and applications. If you plan to use this documentation in a hardcopy format, ensure that you have these books available for your reference.
The following Sun Cluster books support the Sun Cluster 3.1 and 3.2 releases. If you are maintaining a different version of Sun Cluster software, refer to the appropriate documentation. All Sun Cluster documentation is available at http://docs.sun.com. Documentation that is not available at http://docs.sun.com is listed with the appropriate URL.
Table P–2 Sun StorEdge 3310 and 3320 RAID Storage Array Documentation
Title |
Part Number |
---|---|
806-2906 |
|
Sun StorEdge PCI Dual Ultra3 SCSI Host Adapter Release Notes |
816-2157 |
816-7292 |
|
Sun StorEdge 3000 Family Installation, Operation, and Service Manual, 3310 SCSI Array |
816–7290 |
Sun StorEdge 3000 Family Installation, Operation, and Service Manual, 3320 SCSI Array |
819–1274 |
817–4951 |
|
816–7326 |
|
817–3711 |
|
Sun StorEdge 3320 SCSI Array Release Notes Available at http://docs.sun.com/db/doc/817–7660–10 |
817–7660 |
Table P–3 Sun Cluster Documentation
Documentation |
---|
This document contains information about commands that are used to install, configure, or upgrade a Sun Cluster configuration. This document might not contain complete information about basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.
See one or more of the following sources for this information:
Online documentation for the SolarisTM Operating System (Solaris OS)
Other software documentation that you received with your system
Solaris Operating System man pages
If you have problems installing or using Sun Cluster, contact your service provider and provide the following information.
Your name and email address (if available)
Your company name, address, and phone number
The model number and serial number of your systems
The release number of the operating environment (for example, Solaris 10)
The release number of Sun Cluster (for example, Sun Cluster 3.2)
Use the following commands to gather information about your system for your service provider.
Command |
Function |
---|---|
prtconf -v |
Displays the size of the system memory and reports information about peripheral devices |
psrinfo -v |
Displays information about processors |
showrev -p |
Reports which patches are installed |
prtdiag -v |
Displays system diagnostic information |
/usr/cluster/bin/clnode show-rev/usr/cluster/bin/scinstall -pv |
Displays Sun Cluster release and package version information |
Also have available the contents of the /var/adm/messages file.
The Sun web site provides information about the following additional resources:
Sun is interested in improving its documentation and welcomes your comments and suggestions. To share your comments, go to http://docs.sun.com and click Feedback.
The following table describes the typographic conventions that are used in this book.
Table P–4 Typographic Conventions
Typeface |
Meaning |
Example |
---|---|---|
AaBbCc123 |
The names of commands, files, and directories, and onscreen computer output |
Edit your .login file. Use ls -a to list all files. machine_name% you have mail. |
AaBbCc123 |
What you type, contrasted with onscreen computer output |
machine_name% su Password: |
aabbcc123 |
Placeholder: replace with a real name or value |
The command to remove a file is rm filename. |
AaBbCc123 |
Book titles, new terms, and terms to be emphasized |
Read Chapter 6 in the User's Guide. A cache is a copy that is stored locally. Do not save the file. Note: Some emphasized items appear bold online. |
The following table shows the default UNIX system prompt and superuser prompt for the C shell, Bourne shell, and Korn shell.
Table P–5 Shell Prompts
Shell |
Prompt |
---|---|
C shell |
machine_name% |
C shell for superuser |
machine_name# |
Bourne shell and Korn shell |
$ |
Bourne shell and Korn shell for superuser |
# |