The /opt/SUNWsczone/zone component/util directory contains files that automate the process of configuring Sun Cluster HA for Solaris Zones resources. Listings of these files are provided in the following sections:
# # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "@(#)sczbt_config 1.1 06/02/22 SMI" # # This file will be sourced in by sczbt_register and the parameters # listed below will be used. # # These parameters can be customized in (key=value) form # # RS - Name of the resource # RG - Name of the resource group containing RS # PARAMETERDIR - Name of the parameter file direcrory # SC_NETWORK - Identfies if SUNW.LogicalHostname will be used # true = zone will use SUNW.LogicalHostname # false = zone will use it's own configuration # # The configuration of a zone's network addresses depends on # whether you require IPMP protection or protection against # the failure of all physical interfaces. # # If you require only IPMP protection, configure the zone's # addresses by using the zonecfg utility and then place the # zone's address in an IPMP group. # # To configure this option set # SC_NETWORK=false # SC_LH= # # If IPMP protection is not required, just configure the # zone's addresses by using the zonecfg utility. # # To configure this option set # SC_NETWORK=false # SC_LH= # # If you require protection against the failure of all physical # interfaces, choose one option from the following list. # # - If you want the SUNW.LogicalHostName resource type to manage # the zone's addresses, configure a SUNW.LogicalHostName # resource with at least one of the zone's addresses. # # To configure this option set # SC_NETWORK=true # SC_LH=<Name of the SC Logical Hostname resource> # # - Otherwise, configure the zone's addresses by using the # zonecfg utility and configure a redundant IP address # for use by a SUNW.LogicalHostName resource. # # To configure this option set # SC_NETWORK=false # SC_LH=<Name of the SC Logical Hostname resource> # # Whichever option is chosen, multiple zone addresses can be # used either in the zone's configuration or using several # SUNW.LogicalHostname resources. # # e.g. SC_NETWORK=true # SC_LH=zone1-lh1,zone1-lh2 # # SC_LH - Name of the SC Logical Hostname resource # FAILOVER - Identifies if the zone's zone path is on a # highly available local file system # # e.g. FAILOVER=true - highly available local file system # FAILOVER=false - local file system # # HAS_RS - Name of the HAStoragePlus SC resource # RS= RG= PARAMETERDIR= SC_NETWORK= SC_LH= FAILOVER= HAS_RS= # # The following variable will be placed in the parameter file # # Parameters for sczbt (Zone Boot) # # Zonename Name of the zone # Zonebootopt Zone boot options # Milestone SMF Milestone which needs to be online # before the zone is considered booted # Mounts Mounts is a list of directories and their mount options, # which are loopback mounted from the global zone into the # newly booted zone. The mountpoint in the local zone can # be different to the mountpoint from the global zone. # # The Mounts parameter format is as follows, # # Mounts="/<global zone directory>:/<local zone directory>:<mount options>" # # The following are valid examples for the "Mounts" variable # # Mounts="/globalzone-dir1:/localzone-dir1:rw" # Mounts="/globalzone-dir1:/localzone-dir1:rw /globalzone-dir2:rw" # # The only required entry is the /<global zone directory>, the # /<local zone directory> and <mount options> can be omitted. # # Omitting /<local zone directory> will make the local zone mountpoint # the same as the global zone directory. # # Omitting <mount options> will not provide any mount options except # the default options from the mount command. # # Note: You must manually create any local zone mountpoint directories that # will be used within the Mounts variable, before registering this resource # within Sun Cluster. # # Note: Zonebootopt="-s" requires Milestone=single-user # Zonename= Zonebootopt= Milestone=multi-user-server Mounts=
# # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "@(#)sczsh_config 1.1 06/02/22 SMI" # # This file will be sourced by sczsh_register and the parameters # listed below will be used. # # These parameters can be customized in (key=value) form # # RS - Name of the resource # RG - Name of the resource group containing RS # SCZBT_RS - Name of the SC Zone boot resource # PARAMETERDIR - Name of the parameter file directory # Zonename - Name of the zone # ServiceStartCommand - Command including all options to start # the service in the configured zone # ServiceStopCommand - Command including all options to stop # the service in the configured zone # ServiceProbeCommand - Command including all options to probe # the service in the configured zone # RS="" RG="" SCZBT_RS="" PARAMETERDIR="" # # The following parameters will be put in the agents parameterfile: # Zonename="" ServiceStartCommand="" ServiceStopCommand="" ServiceProbeCommand=""
# # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "@(#)sczsmf_config 1.1 06/02/22 SMI" # # This file will be sourced in by sczsmf_register and the parameters # listed below will be used. # # These parameters can be customized in (key=value) form # # RS - Name of the resource # RG - Name of the resource group containing RS # SCZBT_RS - Name of the SC Zone boot resource # ZONE - Name of the Zone # # For SERVICE, RECURSIVE and STATE, refer to the svcadm(1M) # man page # # SERVICE - {FMRI | pattern} # FMRI - Fault management resource identifier # pattern - Pattern matching a service # # RECURSIVE - {false | true} Default: true # False - Just enable the service and no dependents # True - Enable the service and recursively enable # its dependents # # RECURSIVE=true equates to svcadm enable "-r" # # STATE - {false | true} Default: true # False - Do not wait until service state is reached # True - Wait until service state is reached # # STATE=true equates to svcadm enable/disable "-s" # # SERVICE_PROBE - Script to check the SMF service # # The optional parameter, SERVICE_PROBE, provides the # ability to check that the SMF service is working. # This must be a script within the zone and must # adhere to these return codes, # # 0 - The SMF service is working # 100 - The SMF service should be restarted # 201 - The SMF service should initiate a failover of # the Resource Group # # Note: That return code 201, requires that this resource # has an appropriate extension property value for # FAILOVER_MODE and FAILOVER_ENABLED=TRUE # # For FAILOVER_MODE refer to the r_properties(5) man page. # RS= RG= SCZBT_RS= ZONE= SERVICE= RECURSIVE=true STATE=true SERVICE_PROBE=""