test

Sun Cluster Quick Start Guide for Solaris OS

ProcedureHow to Connect the Sun StorEdge 3510 FC RAID Array

  1. Connect the storage array to the management network.

    Alternatively, connect the storage array by serial cable directly to the administrative console.

  2. As the following figure shows, use fiber-optic cables to connect the storage array to the cluster nodes, two connections for each cluster node.

    One node connects to a port on host channels 0 and 5. The other node connects to a port on host channels 1 and 4.

    Figure 1–3 Sun StorEdge 3510 FC RAID Array Connection to Two Nodes

    Illustration: The preceding context describes the graphic.

  3. Power on the storage array and check LEDs.

    Verify that all components are powered on and functional. Follow procedures in First-Time Configuration for SCSI Arrays in Sun StorEdge 3000 Family Installation, Operation, and Service Manual, Sun StorEdge 3510 FC Array.