この手順は、Sun Cluster Manager GUI を使用しても実行できます。詳細については、Sun Cluster Manager のオンラインヘルプを参照してください。
このオプションを使用し、既存のクラスタトランスポートケーブルを有効にします。
phys-schost# プロンプトは、グローバルクラスタのプロンプトを表します。この手順は、グローバルクラスタ上で実行します。
この手順では、長形式の Sun Cluster コマンドを使用して説明します。多くのコマンドには短縮形もあります。コマンド名の形式の長短を除き、コマンドは同一です。コマンドのリストとその短縮形については、付録 B Sun Cluster オブジェクト指向コマンドを参照してください。
クラスタ内にある任意のノード上でスーパーユーザーになります。
clsetup ユーティリティーを起動します。
# clsetup |
メインメニューが表示されます。
クラスタインターコネクトメニューにアクセスするためのオプションに対応する番号を入力し、Return キーを押します。
トランスポートケーブルを有効にするためのオプションに対応する番号を入力し、Return キーを押します。
プロンプトが表示されたなら、指示に従います。ケーブルのいずれかの終端のノード名およびアダプタ名の両方を入力する必要があります。
ケーブルが有効になっていることを確認します。
# clinterconnect show node:adapter,adapternode |
次の例に、ノード phys-schost-2 にあるアダプタ qfe-1 のクラスタトランスポートケーブルを有効にする方法を示します。
[Become superuser on any node.] [Start the clsetup utility:] # clsetup [Select Cluster interconnect>Enable a transport cable.[ [Answer the questions when prompted.[ [You will need the following information.[ You Will Need: Information: Example: node names phys-schost-2 adapter names qfe1 switch names hub1 [Verify that the scinterconnect command was completed successfully:] clinterconnect enable phys-schost-2:qfe1 Command completed successfully. [Quit the clsetup Cluster Interconnect Menu and Main Menu.] [Verify that the cable is enabled:] # clinterconnect show phys-schost-1:qfe2,hub2 Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |