Removing and Replacing Filler Panels

Follow these instructions to remove and replace the filler panels.

Remove Filler Panels

1. Open the front door of the rack.
2. Using a No. 2 screwdriver, remove the M6 screws securing the filler panel to the rack (see Replacing the Filler Panels).

   Depending on the size of the filler panel, there will be a different number of screws securing the filler panel to the rack. Save these screws for future use.

   
   

   Figure 4-6 Replacing the Filler Panels

   

   ---

   Note - If you will be replacing these filler panels, do not remove the Duosert cage-nuts from the RETMA rail holes.

   ---

Replace Filler Panels

1. If necessary, install Duosert cage-nuts into the desired RETMA rail mounting holes.

   After inserting a cage-nut into a mounting hole, turn it 45-degrees to secure it into the hole (see Replacing the Filler Panels).

2. Using a No. 2 Phillips screwdriver, secure the filler panel to the rack using M6 screws (see Replacing the Filler Panels).
3. Close the front door.