Preface |
The Sun Dual 10GbE XFP PCIe ExpressModule User’s Guide provides instructions for installing both the hardware and software for Sun Dual 10GbE XFP PCIe ExpressModule. This manual also describes how to configure the nxge driver, which controls the Sun Dual 10GbE XFP PCIe ExpressModule.
These instructions are designed for enterprise system administrators with experience installing network hardware and software.
Note - In this document the term x86 means the following:
x86 refers to the larger family of 64-bit and 32-bit x86 compatible products. x64 points out specific 64-bit information about AMD64 or EM64T systems. 32-bit x86 points out specific 32-bit information about x86 based systems. For supported systems, see the Hardware and Software Requirements. |
Chapter 1 provides an overview of the Sun Dual 10GbE XFP PCIe ExpressModule.
Chapter 2 explains how to install the nxge device driver software in a Solaris SPARC®, Solaris x86, or Linux environment.
Chapter 3 describes how to install the Sun Dual 10GbE XFP PCIe ExpressModule in your system and verify that it has been installed correctly.
Chapter 4 describes how to edit the network host files after the has been installed on your system.
Chapter 5 explains how to set the nxge device driver parameters to customize each device in your system.
Chapter 6 describes how to configure the Jumbo Frame feature.
Chapter 7 describes how to configure link aggregation.
Chapter 8 explains virtual local area networks (VLANs) in detail and provides configuration instructions and examples.
Appendix A lists the specifications for the Sun Dual 10GbE XFP PCIe ExpressModule.
Appendix B provides an overview of the SunVTS diagnostic application and instructions for updating the SunVTS software to recognize the ExpressModule.
This document might not contain information about basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices. Refer to the following for this information:
Typeface[1] |
||
---|---|---|
The names of commands, files, and directories; on-screen computer output |
||
What you type, when contrasted with on-screen computer output |
||
Book titles, new words or terms, words to be emphasized. Replace command-line variables with real names or values. |
Read Chapter 6 in the User’s Guide. These are called class options. |
The documents listed as online are available at:
http://www.sun.com/documentation/
Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Express Module Adapter Getting Started Guide |
||||
Sun is not responsible for the availability of third-party web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or through such sites or resources. Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content, goods, or services that are available on or through such sites or resources.
Sun is interested in improving its documentation and welcomes your comments and suggestions. You can submit your comments by going to:
http://www.sun.com/hwdocs/feedback
Please include the title and part number of your document with your feedback:
Sun Dual 10GbE XFP PCIe ExpressModule User’s Guide, part number 820-1606-12
Copyright © 2008 Sun Microsystems, Inc. All Rights Reserved.