FIGURE 1-1Bezel of the Sun Netra T5440 Server
FIGURE 1-2Front Panel of the Sun Netra T5440 Server With the Bezel Removed
FIGURE 1-3Rear Panel Cable Connectors and LEDs on the Sun Netra T5440 Server
FIGURE 1-4Rear Panel Power Supply LEDs on the Sun Netra T5440 Server
FIGURE 3-1Contents of the Hardmount 19-Inch 4-Post Kit
FIGURE 3-2Securing the Hardmount Brackets to the Server
FIGURE 3-3Attaching the Rear Mount Support Brackets
FIGURE 3-4Securing the Front of the Server to the Rack
FIGURE 3-5Securing the Rear of the Server to the Rack
FIGURE 3-6Contents of the Sliding Rail 19-Inch 4-Post Kit
FIGURE 3-7Securing the Hardmount Bracket to the Server
FIGURE 3-8Dismantling the Slide
FIGURE 3-9Securing the Guides to the System Chassis
FIGURE 3-10Securing the Short Brackets to the Front of the Rack
FIGURE 3-11Securing the Long Brackets to the Rear of the Rack
FIGURE 3-12Securing the Slide to the Brackets
FIGURE 3-13Sliding the System Into the Rack
FIGURE 3-14Securing the Front of the Server to the Rack
FIGURE 3-15Installing Extender and Slide Assembly on Long Bracket
FIGURE 3-16Securing the Long Bracket Extenders and Slide Assembly to Rack
FIGURE 3-17Contents of the Hardmount 600 mm 4-Post Kit
FIGURE 3-18Securing the Hardmount Brackets to the Server
FIGURE 3-19Attaching the Rear Mount Support Brackets
FIGURE 3-20Attaching the Front Adjuster Brackets to the Front Hardmount Brackets
FIGURE 3-21Attaching the Front Adjuster Brackets to the Rack
FIGURE 3-22Securing the Rear Mount Flange
FIGURE 3-23Contents of the Hardmount 23-Inch 2-Post Kit
FIGURE 3-24Securing the Slide Brackets to the Side of the Server
FIGURE 3-25Securing the Front of the Server to the Rack
FIGURE 3-26Contents of the Hardmount 19-Inch 2-Post Kit
FIGURE 3-27Securing the Side Brackets to the Side of the Server
FIGURE 3-28Installing and Securing the Server in the 2-Post Rack
FIGURE 4-1Rear Panel Cable Connectors, Features, and LEDs on the Rear Panel
FIGURE 4-2Location of the Bezel Server Status and Alarm Status Indicators
FIGURE 4-3Service Processor Serial Management Port – Rear Panel
FIGURE 4-4Service Processor Network Management Port – Rear Panel
FIGURE 4-5Service Processor Ethernet Network Ports – Rear Panel
FIGURE 4-6DC Connection Parts
FIGURE 4-7Opening the DC Input Plug Cage Clamp Using the Cage Clamp Operating Lever
FIGURE 4-8Opening the Cage Clamp Using a Screwdriver
FIGURE 4-9Assembling the DC Input Power Cable
FIGURE 4-10Inserting the Bottom Portion of the Strain Relief Housing
FIGURE 4-11Routing the Wires out of the Bottom Portion of the Strain Relief Housing
FIGURE 4-12Securing the Wires to the Strain Relief Housing
FIGURE 4-13Assembling the Strain Relief Housing
FIGURE 5-1Rear Panel Power Connectors of Oracle’s Sun Netra T5440 Server
Copyright © 2011, Oracle and/or its affiliates. All rights reserved.