How to Recover the SP and BIOS Firmware Using a CD/DVD Drive

1. Insert the Tools and Drivers CD into the CD/DVD drive.
2. Reboot the server.
3. When the Tools and Drivers CD menu appears, select menu option 3, Exit to DOS.
4. From the DOS prompt, navigate to the directory on the Tools and Drivers CD that contains the recovery program.

   For example:

   -> cd firmware/BIOS

5. From the DOS prompt, type the following command to run the recovery program:

   -> run flash.bat

6. When the Recovery menu is appears, select menu option 1.

   For example:

   1) Flash System BIOS firmware - Clear BIOS CMOS and load defaults.

   ---

   Note - When you select option 1, the default ILOM and BIOS settings are loaded. Therefore, you might need to reset some of the ILOM and BIOS settings.

   ---

7. When the recovery program is completed, disconnect the AC power connection from the server for 30 seconds, then reconnect the AC power.