Skip Navigation Links | |
Exit Print View | |
Sun Fire X2270 M2 Server Installation Guide for Linux Operating Systems |
About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Introduction to Linux Installation
Sun Installation Assistant (SIA)
Preliminary Tasks Before Installing an OS
Accessing the Console During Installation
How to Configure the Serial Port
How to Erase Your Boot Hard Disk
Installing Oracle Enterprise Linux
Installing OEL from Distribution Media
Installing SUSE Linux Enterprise Server
Installing SLES10 or SLES11 From Distribution Media
Installing SLES10 Using Local or Remote Media
Installing SLES10 or SLES 11 Using a PXE Network Environment
How to Install SLES10 or SLES11 Using Network PXE Boot
How to Update the SLES Operating System
Installing System Device Drivers to Support Additional Hardware
How to Install System Device Drivers Using Local or Remote Media
How to Install the System Device Drivers Using a Network Share or USB Device
Installing Red Hat Enterprise Linux
Installing RHEL From Distribution Media
How to Download RHEL Media Kits
How to Install RHEL From Distribution Media
How to Update the Red Hat Enterprise Linux Software
Booting From OS Distribution Media
How to Boot From OS Media Locally
How to Boot From OS Distribution Media or ISO File Remotely
Configuring a Linux Server to Support PXE Installation
How to Install and Configure a DHCP Server
How to Install Portmap on Your DHCP Server
How to Configure the TFTP Service on Your DHCP Server
How to Install and Configure the neopxe Boot Server Daemon
How to Configure the NFS Service on Your PXE Server
How to Create a PXE Installation Image for Oracle Enterprise Linux
How to Create a PXE Installation Image for Red Hat Linux
Creating a PXE Image for SUSE Linux
How to Install Linux From a PXE Server
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
SUSE Linux - How to Identify Logical and Physical Network Interface Names While Installing the OS
RHEL - How to Identify Logical and Physical Network Interface Names While Installing the OS
This topic provides instructions for installing Red Hat Enterprise Linux from distribution media. You can also install RHEL using a PXE installation, as described in Configuring a Linux Server to Support PXE Installation.
Note the following conditions:
If you are going to install your OS on a disk that is part of a RAID array, you must configure the RAID array before installing your OS. See your disk management documentation collection for details.
While configuring an operating system for a networked server, you must provide the logical names (assigned by the OS) and the physical name (MAC address) of each network interface. See Identifying Logical and Physical Network Interface Names for Linux OS Configuration for details.
Before you install RHEL on your server, consult the following Red Hat documentation.
|