C H A P T E R 3 - Inspecting the Array Package

C H A P T E R 3

Inspecting the Array Package

This chapter provides the general procedure for inspection and reviews the Sun StorEdge 3120 SCSI array package. Topics covered in this chapter include:

Unpacking the Array

Checking the Package Contents

Field-Replaceable Units

Customer-Provided Cables

3.1 Unpacking the Array

Follow these guidelines for unpacking the equipment.

Caution - Always use two people to remove the unit from its container, to avoid personal injury or damage to the equipment during installation. A fully loaded unit weighs approximately 30 pounds (13.608 kg).

1. Select a suitable area for unpacking.

2. Store all packing material and boxes for possible equipment returns.

3. Check the Contents Sheet in your product package.

The Contents Sheet summarizes the standard contents for your product. See Checking the Package Contents.

4. Compare the packing slip and the list of parts with the items you received.

If the list of parts on your packing slip does not match the items you received, or any items appear damaged, immediately notify your carrier agent and the supplier who prepared your shipment.

5. Carefully examine the cables provided in the package.

If any cable appears to be damaged, contact the Technical Service department for an immediate replacement.

6. Check the list of Customer-Provided Cables.

These are required to complete your installation.

Caution - You must purchase or provide 320M-compliant SCSI cables for connecting the Sun StorEdge 3120 SCSI array to host servers.

3.2 Checking the Package Contents

It is important to inspect your Sun StorEdge 3120 SCSI array packages for standard items as well as purchased options before you begin installation. If any parts are missing or damaged, contact your sales representative immediately.

Quantity	Item
1	Sun StorEdge 3120 SCSI array (a group of disks, no controller)
1	Sun StorEdge 3120 SCSI Array Contents Sheet To download and print the latest Sun StorEdge 3120 SCSI Array Release Notes, go to: `http://www.sun.com/products-n-solutions/hardware/docs/Network_Storage_Solutions/Workgroup/3120`
1	SCSI jumper cable, 1 foot (30 cm.), VHDCI-VHDCI (for bus setting)
1	SCSI jumper cable, 1.5 foot (45 cm.), VHDCI-VHDCI
2	DC power cables if you ordered a DC-powered array
2	AC cord locks in a plastic bag if you ordered an AC-powered array
2	Front-bezel keys in a plastic bag, to secure the front bezel onto the chassis
Various	Purchased options. These options are ordered at the time of purchase and are integrated into or added to the unit prior to delivery.

3.3 Field-Replaceable Units

Check that you received all field-replaceable units (FRUs) ordered with your Sun StorEdge 3120 SCSI array. For a complete list of FRUS, see Available FRUs.

3.4 Customer-Provided Cables

Customers must provide the following cables.

Two 3-prong AC power cables if you have an AC-powered array.

One Ultra 320 SCSI cable per host to connect a host to an array; up to two host cables may be needed per array.

To obtain qualified cables, consult your Sun sales representative.