Solaris Express Installation Guide: Solaris Live Upgrade and Upgrade Planning

Create RAID-1 Volume on Two Physical Disks

Figure 2–5 shows a new boot environment with a RAID-1 volume (mirror) that is created on two physical disks. The following command created the new boot environment and the mirror.

# lucreate -n second_disk -m /:/dev/md/dsk/d30:mirror,ufs \ 
-m /:/dev/dsk/c0t1d0s0,/dev/md/dsk/d31:attach -m /:/dev/dsk/c0t2d0s0,/dev/md/dsk/d32:attach \ 
-m -:/dev/dsk/c0t1d0s1:swap -m -:/dev/dsk/c0t2d0s1:swap

This command performs the following tasks:

Figure 2–5 Create a Boot Environment and Create a Mirror

The context describes the illustration.