Installation Issues

Review the following notes before performing the Hardware Management Pack installation.

Note - There might be additional installation issues in the Oracle Hardware Management Pack 2.1 Release Notes. Please review the Release Notes, along with the following issues, before installing Hardware Management Pack.

Unix Installer Issue (CR 6977584)

The installer aborts when the DISPLAY variable is set for a Solaris or Linux operating system. To avoid this issue, unset the DISPLAY variable before installing Hardware Management Pack.

Error Reported When Launching Installer on a Solaris System (CR 6982393)

When launching the Oracle Hardware Management Pack Installer on a Solaris system, the following error might appear: ./install.bin: !: not found You can ignore this error. The Installer should launch normally.

Running Installer on Solaris With SUNWCreq Cluster Fails (CR 6982718)

Before installing Oracle Hardware Management Pack on a Solaris host installed with the SUNWCreq (Core System Support) metacluster, you must install SUNWxcu4 (contains POSIX df command) or set the following environment variable: IATEMPDIR=$HOME.

Sun Fire X4170 M2 Requires Tools and Driver Installation for Correct ICH10 Slot Information (CR 6992155)

For a Sun Fire X4170 M2 system running Windows 2008 R2, you need to install the drivers from the X4170 M2 Tools and Drivers CD before using the RAIDconfig tool. Failure to install the drivers could result in the slot information for the HDDs attached to the internal ICH10 controller to be reported incorrectly.

You can also use the Oracle Hardware Installation Assistant to install Windows 2008 R2 to avoid this problem.

Skip Navigation Links
Exit Print View
	Oracle Hardware Management Pack 2.1 Installation Guide