JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Blade X6275 M2 Server Module Service Manual
search filter icon
search icon

Document Information

Service Manual Overview

Using This Documentation

Product Information Web Site

Related Books

About This Documentation (PDF and HTML)

Documentation Comments

Contributors

Change History

Server Module and Components Overview

Product Description

Product Features

About the Sun Blade 6000 Modular System Chassis

Illustrated Parts Breakdown

Front Panel LEDs and Features

Power and Reset

Power Modes

Power Button and Power OK LED

Powering On and Off the Server Module

Preparation Procedures for Service and Operation

Preparing the Server for Service

Preparing the Server for Operation

Component Removal and Installation Procedures

Replacing the System Battery

Removing and Installing DIMMs

Removing and Installing Flash Modules

Removing and Installing the Energy Storage Modules

Removing and Installing the Service Processor Board

Removing and Installing USB Flash Drives

Removing and Installing a CPU and Heatsink Assembly

How to Replace the Motherboard Assembly

Diagnostic and Maintenance Information and Procedures

Diagnosing Server Module Hardware Faults

BIOS Power-On Self-Test (POST) Codes

Server Module Maintenance Procedures and Information

Specifications

Dimensions

Environmental Specifications

USB Flash Drive Specifications

Index

Product Features

The Sun Blade X6275 M2 Server Module product features are listed in the following table.

Feature
Description
CPU
Up to four Intel Xeon 5500 Series Quad-core processors per server module.
  • Intel Xeon six-core X5670, 2.93 GHz, 12 MB cache, 6.40 GT/s QPI, HT, Turbo Boost, 95 W

  • Intel Xeon six-core X5660, 2.80 GHz, 12 MB cache, 6.40 GT/s QPI, HT, Turbo Boost, 95 W

  • Intel Xeon quad-core E5620, 2.4 GHz, 12 MB cache, 5.86 GT/s QPI, HT, Turbo boost, 80 W

Nodes
Two independent compute nodes, 0 and 1. The Sun Blade X6275 M2 Server Module has two symmetric compute nodes, with each node contains two Intel Xeon processors sockets.
Density
Four sockets, 16 cores (eight cores per node), and 32 threads per server module.
Memory
Up to 24 DDR3 LV DIMMs per blade (12 per node).

Up to 2 DDR3 LV DIMMs per channel, 3 channels per installed processor.

Supported DIMMs:

  • 4 GB dual-rank, LV DDR3–1333 MHz, +1.35 V, 2 Gb

  • 8 GB dual-rank, LV DDR3-1333 MHz, +1.35 V, 2 Gb

Up to 96 GB of main memory (per compute node) using 8 GB DDR3 LV DIMMs.

Up to 48 GB of main memory (per compute node) using 4 GB DDR3 LV DIMMs.

Up to total of 192 GB of memory, per server module (8 GB DIMMs).

See DIMM Population Rules and Guidelines for the Sun Blade X6275 M2 Server module.

Video Memory
8 MB, Maximum resolution: 1280x1024 pixels.
Flash Modules
Two on-board 24 GB SATA-based Flash Modules (FMods)(one per compute node) with Energy Storage modules.
USB
Two on-board USB 2.0 ports (one per compute node).
HBA/HCA
QDR Infiniband Express Module with Connect X-2
Service processor (SP)
Server modules include a service processor (SP) mezzanine card. The SP provides IPMI 2.0 compliant remote management capabilities across a broad range of Sun server models. Each server module node’s SP features:
  • Integrated Lights Out Manager (ILOM)

  • Local ILOM command-line access using serial connection

  • 10/100 management Ethernet port to mid-plane

  • Remote keyboard, video, mouse, and storage (KVMS) over IP

Front Panel I/O
Two universal connector ports (UCP), one per compute node, are available for use with the multi-port cable. The dongle cable provides the following interface connections:

  • VGA graphics

  • Serial port

  • Dual USB ports (keyboard/mouse/USB device)

Operating systems

For supported operating systems, see Sun Blade X6275 M2 Server Module Product Notes.
Chassis Compatibility
The Sun Blade 6000 modular system chassis is the only supported chassis.