How to Prepare the Server Module for Service

This procedure contains the steps required to safely remove the server module from the chassis.

1. Review the Sun Blade X6275 M2 Server Module Product Notes for important up-to-date information about the server module.
2. Review the list of CRUs (customer-replaceable units) and FRUs (field-replaceable units). See CRUs and FRUs.
3. Review the removal and install procedures to determine it the serviceability of the task requires an Oracle Service person. See Component Removal and Installation Procedures.
4. Review the list of the tools required for service. See Required Tools.
5. Review the important safety information. See Safety Information.
6. Review the ESD procedures. See Performing ESD and Antistatic Prevention Measures.
7. If necessary, activate the server module Locate LED. See Using the Locate LED to Find the Server Module (Optional).
8. Power off the server module. See How to Power Off the Server Module.
9. Remove the server module from the chassis. See How to Remove the Server Module from the Chassis.
10. Set the server module on a flat surface with ample space and light.
11. Remove the server module top cover. See How to Remove the Server Module Top Cover.
12. Use an antistatic brush, canned air, or a vacuum to remove dust from the server module components and air vents.

    ---

    Caution - Possible component damage. Do not use liquids or spray cleaners to clean the interior of the server. The use of liquids or spray cleaners within the interior of the server, the chassis, and the rack can cause component damage.

    ---

Next Steps

Component Removal and Installation Procedures