JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Blade X6275 M2 Server Module Installation Guide
search filter icon
search icon

Document Information

Using This Documentation

Product Information Web Site

Related Books

About This Documentation (PDF and HTML)

Documentation Comments

Contributors

Change History

Overview of the Sun Blade X6275 M2 Server Module

Commonly Used Terms

Product Description

Product Features

Specifications

Server Module Front Panel and Indicators

Installing and Powering On the Server Module

About Your Server Module Shipment

Finding the Serial Number and Accessing Warranty Support Information

Adding Optional Components

Installation Prerequisites

How to Install Your Server Module

How to Apply Full Power to a Server Module Node

How to Power Off a Server Module Node

Troubleshooting Server Power States

Setting Up ILOM

CMM and Node ILOM Overview

Obtaining the ILOM IP Address

Accessing ILOM

Configuring an ILOM IP Address

Accessing the Host Console Through ILOM

Installing a Supported OS

Flash Modules

USB Flash Drive

Specifying a Boot Device

Index

Installing and Powering On the Server Module

This section describes how to install your server module into a Sun Blade 6000 modular system chassis.

The installation consists of the following tasks:

Step
Task
Link
1
Unpack the server module from the shipping container.
2
Find the server's serial number and learn where to go to access warranty support information.
3
If applicable, install the optional server module components before you install the server module into the chassis.
4
Ensure that other pre-installation steps are complete.
5
Install the server module into a powered-on chassis.
6
Apply main power to your server module.