About This Documentation (PDF and HTML)
Hardware Installation and Product Notes
Overview of the Sun Blade X6275 M2 Server Module
Installing and Powering On the Server Module
Overview of the Sun Blade X6275 M2 Server Module Product Notes
System Software Release Features
Hardware, Firmware, and BIOS Issues
Installing the Oracle Solaris Operating System
Installing Red Hat Enterprise Linux
Installing the SLES Operating System
Introduction to Oracle VM Installation
Creating a PXE Installation Image for Oracle VM
Introduction to Windows Installation
Getting Started With Windows Server 2008 Installation
Installing the Windows Server 2008 R2 Operating System
Updating Critical Drivers and Installing Supplemental Software
Incorporating Device Drivers into a WIM Image for WDS
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Managing Power Usage and Monitoring Power Consumption
Configuring the Server Power Restore Policy
Switching the Default Serial Port Output Between SP and Host Console
Indicators, Sensors, and Traps
About This Documentation (PDF and HTML)
Introduction to Diagnostic Tools
Standalone Package-Based Diagnostics
Offline Operating System-Based Diagnostics
Online Operating System-Based Diagnostics
Diagnostic Tools for Oracle Servers
Using the Diagnostic Tools to Troubleshoot a Server
Setting Up a Server for Testing
U-Boot Diagnostic Startup Tests
U-Boot Diagnostic Startup Tests Overview
System Diagnostic Test Options at Startup
U-Boot Diagnostic Test Modes-Normal, Quick, and Extended
Reporting Diagnostic Failures at System Startup
How to Select a U-Boot Diagnostic Mode to Run at Startup
U-Boot Normal Mode- Test Output Sample
U-Boot Quick Mode- Test Output Sample
U-Boot Extended Mode- Test Output Sample
Sample SP Environmental Variables Showing U-Boot Test Status
Accessing Pc-Check Diagnostics Utility
How to Access Pc-Check Through the ILOM Web Interface
How to Access Pc-Check Through the ILOM CLI
System Information Menu Options
Advanced Diagnostics Tests Menu Options
How to Test the Server's Hard Disks
How to Run Immediate Burn-in Tests
How to Create and Save Scripts for Deferred Burn-in Testing
Create Diagnostic Partition Menu Option
Show Results Summary Menu Options
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From a USB Device
How to Set Up the Tools and Drivers CD/DVD Image on the PXE Server
How to Access the Tools and Drivers CD/DVD From the Target Server
Server Module and Components Overview
Preparation Procedures for Service and Operation
Component Removal and Installation Procedures
The U-Boot diagnostic test in -Normal mode automatically runs each time you start your server. However, if you would like to run the U-Boot diagnostic test in -Quick or -Extended mode, you must select these modes to run at startup. For further details about how to select one of the three U-Boot diagnostic modes to run at startup, see the following procedure.
All U-Boot diagnostic tests are required to run from a serial connection. You must have either a hyper terminal or network serial console connected to the server.
For information about how to connect a local serial console to the serial port on the server, refer to the installation guide for your server. For information about how to establish a network serial connection to the SP, see the Oracle Integrated Lights Out Manager 3.0 User’s Guide.