ILOM operates on many platforms, supporting features that are common to all platforms. Some ILOM features belong to only a subset of platforms. This topic describes the difference between ILOM features supported on the server and the common set of features described in the ILOM 3.0 base documentation.
Note - To perform some procedures documented in Oracle’s ILOM 3.0 base documentation, you must create a serial connection to the server and activate the Physical Presence switch on the server. The Physical Presence switch, which is the Locator button, is located on the front and rear of the server. For information about creating a serial connection, refer to the Netra SPARC T3-1Server Installation Guide.
Among the ILOM features supported on other platforms, ILOM does not support the following features on this server:
POST diagnostics user-reset trigger is not available.
ILOM supports the following feature on this server, which may not be available on other platforms:
POST diagnostics hw-change trigger. This new trigger (hw-change error-reset) is the default setting for the server, and causes POST to run each time the server is power-cycled. For more information on POST, refer to the Netra SPARC T3-1 Server Service Manual.
Broken Link (Target ID: Z40002147163)