Skip Headers
Oracle® Argus Safety Administrator's Guide
Release 6.0.1

E15950-03
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

3 Business Configuration

 

About Business Configuration

This section explains the Business Configuration of the Argus Console, categorized into the following modules:

Section Sub-Section Description
Business Configuration Product and License: This section helps in capturing Product Details such as product specifics, product licenses and products involved in the studies.

These can be the products marketed, or under investigation, by the company.

Refer to the following sections for further information on:

  • Configuring Product Families

  • Configuring Products

  • Configuring Licenses

Studies Configuration This section helps in capturing Study information such as study specifics, products involved in the study licensed countries associated with the study and the clinical references used in the expedited reports.
Expedited Report Rules This section helps in capturing Expedited Reporting Rule configuration.

The Reporting Rules configuration feature enables the administrator to define the reporting rules or criteria for the cases to be qualified for expedited reporting.


Editable and Non-editable Business Configuration Sections

Each of the three Business Configuration sub-sections supports various views for efficient access to data. Each view consists of a hierarchical tree-structure comprising various nodes such as Family, Product, Licenses, and Countries.

The following table list which nodes can be edited and which cannot.

Business Configuration Sub-Section Organized By Node Editable
Products and Licenses Family / Product / Licenses Family Yes
Product Yes
Licenses Yes
Product / Licenses Product Yes
Licenses Yes
License / Products License Yes
Products Yes
Countries / Licenses Countries No
Licenses No
Countries / License Type / Licenses Countries No
License Type No
Licenses No
Studies Projects / Studies / Products Projects No
Studies Yes
Products No
Studies / Products Studies No
Products No
Products / Studies Products No
Studies No
Countries / Projects / Studies Countries No
Projects No
Studies No
Expedited Report Rules Country / License Type / Reporting Rule Country No
License Type No
Reporting Rule Yes
License Type / Reporting Destination / Reporting Rule License Type No
Reporting Destination No
Reporting Rule Yes
Responsible Group / Reporting Rule Responsible Group No
Reporting Rule Yes
Inactive Rules Country No
License Type No
Reporting Rule Yes
Active Rules Country No
License Type No
Reporting Rule Yes

Type Ahead Fields

Some fields in the Business Configuration section of Argus Console are enabled with Type Ahead-input. This means that these fields are equipped with the ability to guess what the user is typing.

Based on the text being entered, this feature provides suggestions for the user to choose from.

Surrounding text describes keyingr.gif.

The following fields have the type-ahead feature:

  • Clinical Reference Type (Under Clinical Studies Configuration)

  • Ingredients (Under Product Family Configuration)

  • Manufacturers (Under Product and License Configuration)

  • Project ID (Under Clinical Studies Configuration)

  • Reporting Destination (Under Expedited Reporting Rules)

Additional Comments Fields

Be aware of the following:

  • The system has a Comments field that accommodates a maximum of 1000 characters on the Product Family, Product, and License and Study configurations.

  • The Product Configuration permits a maximum of 50 characters in the PSUR Group Name field.

  • The License Configuration permits a maximum of 50 characters in the CTPR Group Name.

  • The Business Configuration report prints the Comments field, and the system tracks any changes made to these fields in the audit log.

Configuring Product Family

Each company has a set of products to sell and a set of processes unique to its business. The Administrator should be aware of the company business processes and/or workflow rules. The manner of product configuration in Argus Safety will depend on how the company handles its internal workflow related to the release of a product.

Details of the company's products can be added in Argus Safety using the Business Configuration section. This feature helps end-users to retrieve details of company products, without entering significant product information for each case.

Every company product should belong to a product family. Each product within a product family shares the same key ingredient and data sheets but can have a different concentration for the key ingredient.

Configuration of the product is done using the Business Configuration->Products and Licenses section.

The following illustration shows the fields associated with this section.

Field Descriptions

The following table lists and describes the fields in this section.

Field Description
Product Family Name Enables the user to enter a new product family name.
Product Group Enables the user to select a product group name.
Ingredient Name Enables the user to select the multiple key ingredients for the product family
  • The user can sort the field alphanumerically.

  • Sorting on the ingredient name in the Product Family Configuration updates the sort order in all the products which are part of the same family

  • A maximum of 25 items are displayed as the search results in the drop-down list.

  • The Key Ingredients drop-down list enables the user to enter up to 20 active ingredients for a product family.


Adding Product Families

The screen helps in capturing the Product Family information. As per the Argus data model, the Product Family adds the Ingredients, Data Sheets, and the Product group.

Products are associated with Product families and are created using the Data Sheets, Dosage form, Strength and unit of the corresponding Product Family. The Product Group field in the Product Family configuration screen enables the Argus administrator to group the product families into various Product Groups.

To add a product family

  1. In the Business Configuration section, select Product and Licenses.

  2. In the left panel, select a filtering criterion. The left panel now displays the tree view of the Family based on the filtering criterion.

  3. Select a Product Family and click to view the product family details in the right panel.

    Note:

    Ensure that you select the top-level folder to view the details of the product family.

    Product family details appear in the right panel.

    Tip:

    • You can alternatively click Add Family to create a new family of products.

    • Use Copy to make an editable copy of an existing product family.

    • Use Copy with Datasheets to make an editable copy of an existing product family, along with all associated datasheets.

  4. Enter the Product Family Name as applicable.

  5. Select the Product Group from the drop-down list. This helps you to group the product families into various product groups.

  6. Select the required Ingredient Name(s) displayed under the Key Ingredients section

  7. Select the required Datasheet configuration.

  8. Click Save to save the changes made to the Product Family.

Tip:

If you have added a new Product Family, click Add Family to save the new Product Family.
About Filtering Criterion

The filtering criterion is essential as it helps you to search for specific items. The Argus Console provides this option for the Business Configuration section.

Using Organized by

The filtering browser is displayed in the top-left corner of the left panel. The Products and Licenses section can be filtered based on any of the three combinations shown in the following illustration. Consider the following:

  • If you enable Organized by Family/Product/License, then the generated output will be visible in a tree-format in the left panel.

  • If you enable the Organized by Product/License, only the Product and License views are available in the tree view in the left panel.

    Surrounding text describes fpl.gif.

    The Argus Console helps you to filter information further for the Business Configuration section. Once you have selected the Organized by, you can specify whether your search should contain or start with specific alphabets.

    The filtering criterion shown in the following illustration, enables the system to search for all Family/Product/License data that contains the term Cure.

    Surrounding text describes fpl2.gif.

Tip:

The number displayed next to the folder indicates the number of Products in the product family.

Creating Data Sheets

Packaged medications (like prescriptions) are marketed with an insert sheet that lists the known contraindications (side-effects) that may occur as a consequence of taking the product. These inserts are also referred to as data sheets. It is important to list these effects in order to ensure accuracy in reporting. An inaccurate report could result in the wrong action taken or bring harm to a patient.

The Listed Event terms from the data sheet determine the listedness of the adverse event(s) for the case. Depending on the configured regulatory report rules, the listedness determination will automatically schedule the expedited reports.

The data sheet in the Product Family is configured using the Business Administration -> Products Family section.

Field Descriptions

The following table lists the Field Descriptions for this section.

Field/Control Name Description
Datasheet Name Enables the user to rename the datasheet.Be aware of the following:
Activate Data Sheet Enables the user to activate the current data sheet. Be aware of the following:
  • When you click the checkbox, the system enables the radio buttons next to Activate Data Sheet.

    You can a either select the option to activate the data sheet with Terms added on the current dates or on another date entered in the Other Date field.

    Once the datasheet is activated, the system disables the Activate Datasheet text box.

    If you enter a date greater than the current system date, the system permits you to enable the activation date.

Core Sheet The Core Sheet checkbox enables the user to indicate that this data sheet is the central data sheet. This checkbox is disabled if another data sheet is marked as the core data sheet.
Include The Include checkbox enables the user to indicate that this data sheet includes the particular datasheet selected in the drop-down list. Be aware of the following:
  • The system populates the drop-down list with the list of datasheets that do not include other data sheets.

  • The system enables the drop-down list only when the include checkbox is checked.

    If a product family has a single datasheet that is marked "core," the system disables the include checkbox.

Other Date  
Global /No local labeling assessment required Checking this option automatically marks any license using this data sheet, as assessed, and the license does not require any local labeling assessment.
Notes On clicking the notes icon, a pop-up appears to enable users to enter notes while entering the details of the Datasheet.
Green Checkmark When clicked, enables you to display the full MedDRA hierarchy, including the To be coded value, in the MedDRA hierarchy popup window. Select Console-->Product Family-->Datasheet Terms to see the full list of datasheet terms.
Listed Term This field displays the listed terms (Preferred Term) for the datasheet.
View Revisions Enables users to view a list of term that were added or removed with the added date.

To create a datasheet

  1. In the Datasheet section of the Product Family section, click Activate Datasheet to activate the data sheet associated with the Product Family.

    Surrounding text describes ds.gif.

    Note:

    If you want to make a copy of the datasheet, click Copy. Ensure that you enter a new name for the datasheet, if you are making a copy of another datasheet.
  2. Select the Core Sheet check box, if this data sheet is required to be the core data sheet. Only one core data sheet is allowed per product.

  3. Select the Include check box and select the value from a drop-down list. This helps you to indicate that this data sheet includes the particular datasheet selected in the drop-down list.

  4. Select Global/No local labeling assessment required to automatically mark any license using this data sheet as assessed.

  5. Click Add Term to select the listed terms (Preferred Term) for the datasheet. The MedDRA browser appears.

    Surrounding text describes meddra.gif.

  6. The MedDRA Browser available for Datasheets enables the administrator to select either multiple or all Preferred Terms (PTs) in the following way:

    • Click the required High Level Term (HLT) and select multiple PTs by clicking on each required PT.

      OR

    • Right-click the HLT to select all entities available under PT.

  7. Select the Preferred term from the MedDRA browser and click Select.

    Tip:

    You can alternatively click Select and Close, in the MedDRA browser to save and exit the Product Family screen.

    You can use Delete Term to delete the selected listed term(s) from the datasheet.

  8. Press Save to save the data sheet. The Data Sheet name displays in the Data Sheets list.

    Tip:

    To view the revision history associated with a Datasheet, click Revisions. A pop-up appears containing the following information:
    • Rev. No: Displays the revision number of the datasheet. This number is updated each time the data sheet is activated

    • Terms: Displays all the terms that were added/removed. When a term has been deleted, it is marked with an asterisk (*) next to the term name.

    • Added On: Displays the date when the terms were added in the datasheet

    • Active On: Displays the date when the datasheet was made active for that revision

Configuring Products

Each company has a set of products to sell and a set of processes that are unique to its business.

The manner of product configuration in Argus Safety depends on how the company handles its internal workflow, related to the release of a product. Therefore the Administrator should be familiar with the business processes or workflow rules of the company.

Configuration of the product is done in the Business Administration -> Products and Licenses section.

When configuring a product, be aware of the following:

  • When the user clicks the Notes link on a data sheet, he/she can enter a maximum of 2000 characters in the Preferred Terms section of a data sheet.

  • When the user clicks the Notes link, he/she can enter one note for each term.

  • The user can use the standard spell check function.

  • If notes have been entered for the term, the system displays the Notes icon to indicate that notes are present.

  • The system also prints the notes on the Product Family details.

  • A comments field that can contain up to 1000 characters has been added to the Product Family/Product/License and Study configuration elements.

  • The Product configuration also has a 50 character PSUR Name.

  • The Business Configuration reports print the contents of the Comments fields.

  • The system tracks any updates made to the data sheets in the audit log.

The following illustration shows the fields associated with this section.

Surrounding text describes configprods.gif.

Field Descriptions

The following table lists and describes the fields in this section.

Field/Control Name Description
Product Name Enables the user to enter the unique name for the product. The Product name must be at least five (5) characters.
Product Abbreviation Enables the user to enter a five-character abbreviation of the Product name which would be used in Case numbering when Product' is selected in the system numbering configuration in case of non-study cases.

By default, the system populates the field with the first five (5) characters of the generic name of the product family.

Ingredient Name Displays the Ingredients of the Product Family to which the Product belongs.

The user can alphanumerically sort the field.

Sorting on the ingredient name in the Product Configuration updates the sort order in the corresponding Product Family and all the other products which are part of the same family.

Dose Enables the user to enter the dose for the ingredient name.

The user can numerically sort the field.

Unit Enables the user to select the dose units for the ingredient name.

The user can alphabetically sort the field.

Generic Name Displays the generic name of the product. The field is populated by clicking the Copy from Ingredients button.
Product Dosage form Displays a formulation list. The list of formulations is maintained in the Formulation dialog in Code List section.
Manufacturer Displays a manufacturer list. The list of manufacturers is maintained through the Manufacturer dialog in Code List Maintenance.
Strength Enables the user to enter the strength of the product.
Units Displays a list of strength units. The list of Strength units is maintained through the Dosage Units dialog in Code List Maintenance.
WHO Drug Code - Select Provides the World Health Organization Drug Code from the Drug Coding dialog.
Company Code Enables the user to enter the company code for that product.
Model # Enables the user to enter the model number for that product.
International Birth Date Displays the international birthdate, which is automatically calculated from the earliest license, held against this product. This field is read only.
Primary Indication - Encode Displays a primary indication for the product using either the MedDRA or the ICD-9 Dictionary. (The dictionaries are configured through Case Form Configuration).
Device Code If configured for the product, the device code is printed on the MedWatch Device Report D2: Common Device Name section.
Lot # Enables the user to enter the lot numbers for the product.
Date Enables the user to enter the lot expiration dates for the product.

Adding Products

This screen helps in capturing Product Details (product specifics, product licenses, products involved in the studies. These can be the products marketed, or under investigation, by the company. Every company product should belong to a product family. Each product within a product family shares the same key ingredient and data sheets but can have a different concentration for the key ingredient. This data is reflected in multiple expedited and periodic reports and case form-general information section.

To add a product

  1. In the Business Configuration section, select Product and Licenses.

  2. In the left panel, select a filtering criterion.

  3. Select a Product and click to view the product details in the right panel.

    Note:

    Ensure that you select the second-level folder to view the details of the product.
  4. The details of the product appear in the right panel as shown.

    Surrounding text describes configprods.gif.

    Tip:

    • You can alternatively click Add Product to create a new product.

    • Use Copy to make an editable copy of an existing product.

    • Use Copy with Licenses to make an editable copy of an existing product, along with all associated licenses.

  5. Enter the Product Name and Product Abbreviation.

  6. Enter the Dose information associated with the Ingredient Names in the Key Ingredients section.

  7. Select the Unit information from the drop-down list, associated with the Ingredient Names in the Key Ingredients section.

  8. Enter the Generic Name.

    Tip:

    To copy all the Key Ingredients entered in the previous section, click Copy From Ingredients. This helps you to modify the list as required, instead of entering all the names manually
  9. Enter the Dosage Formulation.

  10. Enter the Strength of the dosage and select the Units from a drop-down list.

  11. Click Encode to enter the Primary Indication. This enables you to display a primary indication for the product using either the MedDRA or the ICD-9 Dictionary.

  12. Enter the Model # number associated with the product.

  13. Select the Manufacturer from the drop-down list.

  14. Click Select icon to select the WHO Drug Code associated with the product.

  15. Enter the Company Code allotted for the product.

  16. Enter the Lot# and Date associated with the Product.

    Tip:

    You can click Add to add new Lot# numbers. If you wish to add the current date in the Date field, use the = sign on your keyboard as a short-cut.
  17. Click Save to save the Product details.

    Tip:

    If you have added a new Product, click Add Product to save the new Product.
About Filtering Criterion

The filtering criterion is essential as it helps you to search for specific items. The Argus Console provides this option for the Business Configuration section.

Using Organized by

The filtering browser displays in the top-left corner of the left panel. The Products and Licenses section can be filtered on the basis of any of the three combinations displayed below. Consider the following:

  • If you enable Organized by Family/Product/License, the generated output is visible in a tree-format, in the left panel.

  • If you enable Organized by Product/License, only the Product and License views are in the tree view in the left panel.

The Argus Console helps you to filter information further for the Business Configuration section. Once you have selected the Organized by, you can specify whether your search should contain or start with specific alphabets. For example, the filtering criterion searches for all Family/Product/License data that contains the term Cure.

The left panel now displays the tree view of the Product Family->Product based on the filtering criterion.

Tip:

The number displayed next to the folder signifies the number of licenses within that product.

Configuring Licenses

Once product configuration is complete, you must create product licenses. Licenses are issued for pre-market and post-market release of a drug, device, or vaccine. Investigational (pre-market) licenses are issued for studies done at study centers and marketed licenses are issued for release of product. Configuration of licenses related to a product is a key step in the configuration of Argus Safety.

Configure licenses in the Business Administration -> Products and Licenses section. When configuring product licenses, be aware of the following:

  • The user can enter Medical Device Information in the licenses.

  • The user can enter the following values in the Medical Device Information:

    • AIMD Active Implants

    • MDD Class III

    • MDD Class IIb

    • MDD Class lla

    • IVD Annex II List A

    • IVD Annex II List B

    • IVD Devices for Self-testing

    • IVD General

    • Blank (default)

  • The user can enter up to 20 characters in the PMA/510(k) # field. By default, the field is empty.

  • The user can enter a five-digit Nomenclature Code.

    • This must be a numeric value.

    • By default, the field is empty.

  • The system tracks license updates in the audit log.

  • These values display on the License report.

The following illustration shows the fields associated with this section.

Surrounding text describes configlics.gif.

Field Descriptions

The following table lists the Field Descriptions for the License configuration section.

Field/Control Name Description
Trade Name Enables the user to enter the Trade Name under which this product(s) is (are) authorized by this license.
Award Date Enables the user to enter the license award date for this license.
Withdrawn Date Enables the user to enter the license withdrawal date for this license. The withdrawn date cannot be less than the award date.
Market Authorization Holder Enables the user to select a manufacturer or co-marketing partner for this license of the product.
Biologic / Vaccine Whether the license is for a Biologic/Vaccine (this can impact reporting rule).

If this is option is checked MedWatch will print PLA# not NDA# in section G5. It is included to support the Biologic License Application (BLA) and the Product License Application (PLA) requirements.

Not in Tradename lookup / Not Auto-scheduled An option to indicate that this license name should not appear in the filter criteria for Auto Scheduling of Reports or trade name lookup browser.

When this checkbox is checked, the trade name will not appear for this license in the Trade Name Lookup dialog and this license will not be evaluated or allowed for auto scheduling of the reports, but will be available for manual scheduling of reports.

The license will be displayed in event assessment.

Labeled for Single Use Whether the drug is for single use (such as disposables)

If this option is selected it will mark YES in section H5 of the MedWatch device form, otherwise it will mark NO.

OTC Product This enables the user to specify if the Product has been bought as an Over-the-Counter Product.
Datasheet URL User can enter a hyperlink to a site giving information about the datasheet of the product.
Countries List Enables the user to select all the countries in which the same license was issued.
Authorization Country This enables the user to select the Country for which this license applies.

The chosen country does not impact the reporting rules algorithm. This field maps to the Country' field in the Reporting rules configuration.

License Type The user can select one of the possible six types:

Investigational Drug/Device/Vaccine or Marketed Drug/Device/Vaccine

The chosen license type maps to the License type field under each country on the Reporting rules configuration.

Datasheet Name The datasheet drop-down enables the user to associate a datasheet with the License.

The field lists the datasheets for all the product families of the added products.

The Data Sheet drop-down is enabled when one or more products have been added to the Products list.

License # Enables the user to enter the License Number which will be referred in the regulatory reports like NDA, IND.
Company Item Number Enables the user to enter the Company Item number corresponding to the license.
Countries List Enables the user to select all the countries in which the same license was issued. The system adds the authorization country to the Countries List and updates the list when the user updates the authorization country.
Product Name The Product List box displays the list of products (product name, dosage form and strength) that this associated license covers for regulatory reporting purposes.
Hide When a product is marked as non display, it will not appear in the Trade Name Product lookup dialogue associated with the license tradename.
PMA/510(k)# This field is associated with medical device information and prints in expedited reports.
Nomenclature Code This field is associated with medical device information and prints in expedited reports.
Medical Device Information This field is associated with medical device information and can contain the following values:
  • AIMD Active Implants

  • MDD Class III

  • MDD Class IIb

  • MDD Class IIa

  • MDD Class I

  • IVD Annex II List A

  • IVD Annex II List B

  • IVD Devices for self-testing

  • IVD General

  • Blank (default)

CTRP Group Name This value is used in Argus Safety when filtering periodic report data.
Comments Enables the user to enter information about the element configuration.

Adding Product Licenses

This screen helps capture License information (License specifics, associated with the License, Countries where the product is marketed or is under investigation). This data is reflected in multiple expedited and periodic reports and in case form-product information section.

To add a product license

  1. In the Business Configuration section, select Product and Licenses.

  2. In the left panel, select a filtering criterion.

  3. Expand the folders till you reach the license associated with a product.

  4. Select a license and click to view the license in the right panel.

  5. The system opens the following screen.

    Surrounding text describes configlic.gif.

    1. Enter the Trade Name of the license.

    2. In the Manufacturer list, select the manufacturer of the product.

    3. Select the Authorization Country in which the license was issued.

    4. Select the License Type. This is the type of license.

    5. Enter the license number in License#.

    6. If this license is to be reported under the PLA# and not the NDA# select the Biologic/Vaccine checkbox. If this checkbox is selected, the PLA# (and not the NDA#) will be printed in section G5 of the MedWatch form.

    7. Specify if the drug is Labeled for Single Use or not.

    8. Specify if the drug has been bought as an Over-the-Counter (OTC) Product.

    9. Under Award Date, enter the date the license was granted to the manufacturer.

    10. Enter the Withdrawn date, if applicable.

    11. Enter the Company item number in Company item number.

    12. Enter a URL reference for the license under Data Sheet URL (A URL reference might be a link to product label or product information).

    13. A world wide web address or an appropriate network path (For example: http://anydomainname/anypath or \\FILESERVER\LOCATION) can be entered in this field.

    14. Select Not in Tradename lookup/Not Auto-Scheduled if this license is not to be involved in reporting.

    15. In the Countries List, select the countries that define whether the case will be classified as domestic or foreign for regulatory report scheduling algorithm.

      Tip:

      To modify this list, use the Modify option (placed next to the Countries List).
    16. Select the Data Sheet Name associated with the license, from the drop-down list.

    17. Click Add in the Product Name/Dosage Form/Strength to add a product to the License

      Tip:

      You can alternatively click Add License to create a new license.

      Use Copy to make an editable copy of an existing license.

  6. The Product Browser dialog opens.

  7. Enter the name (partial or full) of the product and select Full Search.

  8. Select the appropriate product in the search results and click Select. Enter all the required products in this manner. Click here for more information on Product Browser.

Using the Product Browser

  1. Click on Add Products to add products.

  2. The Products Browser window opens:.

    • Enter the Ingredient key word for the search. The ingredient is displayed in the first column.

    • Select the Ingredient to obtain the Family it is associated with.

    • Select the Product Name to view the associated Trade Names.

    • Select the Trade Name required.

  3. Select is now enabled at the bottom of the window.

  4. Click Select to add the product details under the Product Name section. The Product Name is displayed in under the Product Name section.

    Surrounding text describes prodbrowser.gif.

  5. The product browser available for datasheets, enables the administrator to select either multiple or all Product Names as follows:

    • Click the Family name and select multiple Product Names by clicking on each required Product Name.

      OR

    • Right-click the Family name to select all entities available under Product Name.

  6. Click Save to save the changes.

    Tip:

    If you have added a new License, click Add License to save the new License.

Configuring Clinical Studies

It is important to configure clinical studies in the Argus Console because it helps the system categorize the source of information for the cases that have been registered. This screen helps in capturing Study information (study specifics, products involved in the study licensed countries associated with the study and the clinical references used in the expedited reports.

Configuration of the product is done using the Business Administration->Studies section.

The following illustration shows the fields associated with this section.

Surrounding text describes studiesconfig.gif.

Field Descriptions

The following table lists and describes the fields in this section.

Field/Control Name Description
Study ID This is the Study ID.
Study Name This is the Study Name.
Project ID This is the project ID for the study.
Study Type The user can select a study type associated with this study.
Other ID This is another ID to refer to this study.
Template Only  
Observe Study Type (E2B) This enables the user to select the study type from a drop-down list.
  • This element is populate from the Case From Clinical Study section of the application.

  • The value selected in Study Configuration, "Observe Study Type (E2B)" is populated in the Case Form Study section when the user selects the Clinical Study.

  • The system updates the standard E2B profiles (EMEA, FDA, and ICH) to populate the tag.

Study Development Phase Enables you to choose the study phase.
Products  
Product Name This is the Product Name.
Dosage Form This is the Product formulation.
Strength This is the Product Concentration.
Units This is the Product Units.
Products -Add WHO Drug Opens Search Screen for selecting a non-company product.
Products -Add Product Opens Search Screen for selecting a company product.
Products -Delete Deletes the selected product row.
Clinical References  
Reference Type Shows the various reference types that can be setup for this study.
Country Enables the user to select a country for the clinical reference type.
Reference Number Captures the reference number that will be reflected on the regulatory reports.
Add Enables the user to add another clinical reference.
Delete Enables the user to delete the selected clinical reference.
Countries Enables the user to select a country for the clinical reference type.
Product License This is the license of the primary (company) product participating in the study.
Product Abbreviation This enables the user to enter an up to 5 character abbreviation of the study name which would be used in Case numbering when Product' is selected in the system numbering configuration in case of study cases.
Centers The system displays the selected study centers for the study.
Study Description Enables the user to enter a brief description of the study.
  Opens the study description in zoom mode and provides a spell check dialog.
  Opens the multi lingual dialog allowing the user to choose the language by clicking on the relevant flag of the country.
Investigator Alert Enables the user to select an existing Advanced Condition. Under Investigator alert, an advanced condition can be created / selected. When this condition is satisfied, the system automatically sends an e-mail to the investigator group associated with this study.
Investigator Alert - select Opens up the advance condition browser.
Study is eligible for Unblinding Check this box if the study can be unblinded. If the Study Type selected is Not Blinded", this field is disabled.
Enable Study Specific Encoding User checks this box if Study specific Auto encoding has to be enabled.
Autoencoding: Drugs (dict) If unchecked (default state) the study will use the dictionaries configured using the Case form Configuration options.

If checked, the Auto encoding button is activated.

Autoencoding: Indications Select this field to enable the system to encode indications using the dictionary the user selects from the drop-down.
Autoencoding: Event Terms Select this field to enable the system to encode Event Term using the dictionary the user selects from the drop-down.
Study Reporting  
Products -Add Product Opens Search Screen for selecting a company product.
Products -Delete Deletes the selected product row.
Inherent Reporting Rules Form  
Always report Usually the study-specific reporting is configured to handle reporting requirements for non-company products, e.g. Placebo or a comparator, as the company-based reporting is taken care by the license based reporting logic utilized in Argus.

However, checking this checkbox will force Argus to check for qualifying expedited reporting rules based on the country, license type and reporting destination specified even if no non-company products are identified as study drugs.

If the checkbox is unchecked then expedited reports based on the study-specific reporting rule will only be scheduled if there is a non-company product identified as a study drug.

Country Specifies what country's reporting rules the console should consider. The list includes countries for which the expedited reporting rules exist.
License Type Specifies what license type to consider for the specified country. Only applicable license types, i.e. Marketed Drug, Device, Vaccine or Investigational Drug, Device, Vaccine are displayed in this drop down list.

For example if a country, "Germany" only has reporting rules for investigation drugs, then "Investigational Drug" is the valid drop-down element.

Reporting Destination This field is optional and by default will have the value All.

Specifying any value in this list limits the reporting rules to be evaluated to the selected country, license type and reporting destination. The drop-down list is filled with valid destinations (regulatory authorities) for the country and license type selected based on the expedited reporting rules.

For example, if the user has selected Germany, Investigational Drug and there are reporting rules for Germany with destinations of "BfArM" and "Drugs R us" then only these two destinations (LM: regulatory authorities) are displayed.

Time Frame This field cannot be searched or altered, but is included for informational purposes.

Based on the country, license type and reporting destination selected, the system determines and displays all possible time frames in ascending order separated by a comma.

Possible Report Forms This field cannot be searched or altered, but is included for informational purposes.

Based on the country, license type and reporting destination selected, the system should determine and display all possible report forms in alphabetical order separated by a comma.


Adding Clinical Study Configurations

This screen helps capture study information (study specifics, products involved in the study licensed countries associated with the study and the clinical references used in the expedited reports). Study Information is required if a case has been reported while conducting a study and the participating product(s) belong to the company. This data is reflected in multiple expedited and periodic reports and case form-general information section.

Be aware of the following:

  • The IND Reference Number drop down displays only those reference numbers (license numbers) associated with a product with a License Type of Investigational.

    • Console --> Business Configuration --> Studies --> Clinical Reference section (in middle of screen).

    • The Reference Number drop down field should be limited to IND (Investigational) US Licenses Number only.

  • The Study Name on the Study Configuration can be a maximum 70 Characters (same as the Product name)

To add a study

  1. In the Business Configuration section, select Studies.

  2. In the left panel, select a filtering criterion.

  3. Select a Study and click to view the study details in the right panel.

    Note:

    Ensure that you select the study-level folder to view the details of the study.
  4. The details of the study appear in the right panel. Surrounding text describes studiesconfig.gif.

    Tip:

    • You can alternatively click Add Study to create a new study.

    • Use Copy to make an editable copy of an existing study.

    • Use Copy with Products to make an editable copy of an existing study, along with all associated products.

  5. Enter the Study ID and Study Name associated with the Study.

  6. Select the Project ID for the Study, from the drop-down list.

  7. Select the Study Type associated with the Study, from the drop-down list.

  8. Enter the Other ID. This will be an alternative id for the Study.

  9. Select Template to associate a template with the Study.

  10. Select the Observer Study Type(E2B) from the drop-down list.

About Filtering Criterion

The filtering criterion is essential as it helps you to search for specific items. The Argus Console provides this option for the Business Configuration section.

Using Organized by

The filtering browser displays in the top-left corner of the left panel. The studies section can be filtered based on of any of the three combinations shown in the following illustration. The generated output is visible in a tree-format, in the left panel, based on the entire categorization of Projects, Studies, Products.

Surrounding text describes psps.gif.

If you enable the Organized by Study/Products, only the Study and Product views will be available in the tree view in the left panel.

The Argus Console helps you to filter information further for the Business Configuration section. Once you have selected the Organized by, you can specify whether your search should contain or start with specific alphabets.

The filtering criterion shown in the following illustration, enables the system to search for all Projects/Studies/Products data that contain the term Cure.

Surrounding text describes psps2.gif.

The left panel displays the tree view of the Projects/Studies/Products based on the filtering criterion.

Tip:

The number displayed next to the folder signifies the number of studies/products within that project/studies family.

Adding WHO Drug Details

The system enables you to add WHO Drug detail information.

To add WHO Drug information

  1. Select Add WHO Drug in the Products section to add the WHO Drug details associated with the Study.

  2. Click on WHO Drug to add WHO drug details (using the WHO Drug browser window) associated with the Study.

  3. The system opens the WHO Drug browser window.

    Surrounding text describes whod.gif.

  4. Select the Trade Name or the Ingredient radio-button, to search for the WHO Drug term associated with either the Trade Name or the main Ingredient of the drug.

  5. Click Search to execute the search. The data is displayed as follows.

  6. Select the required component/row (this can be the key Trade Name or Ingredient).

  7. The row now appears highlighted and the Drug Details section displays the associated information.

  8. Click Select to add this drug information in the Product Name section of the Studies Configuration window.

  9. The WHO Drug browser window closes and the drug appears in the Product Name section.

    Surrounding text describes productbrowser.gif.

    1. Select Add Product in the Products section to add the products associated with the Study.

    2. Click on Add Products to add products. The Product Browser window appears.

    3. Enter the Ingredient key word for the search. The ingredient is displayed in the first column.

    4. Select the Ingredient to obtain the Family it is associated with.

    5. Select the Product Name to view the associated Trade Names.

    6. Select the Trade Name required.

    7. Select is now enabled at the bottom of the window. Click Select to add the product details under the Product Name section. The Product Name is displayed in under the Product Name section.

      Tip:

      To delete a product, select the product and click Delete (placed next to Add Product). A pop-up appears asking you to confirm the action.
    8. Select the Reference Type associated with this Study, from the drop-down list.

    9. Select the Country associated with this Study, from the drop-down list.

    10. Enter the Reference Number associated with the Reference Type in this Study.

      Tip:

      • To add more Reference Types in the Clinical Reference section, simply click Add. A new row is added to this section.

      • To delete the Reference Type, select the Reference Type and click Delete (placed next to Add). A pop-up appears asking you to confirm the action.

    11. The Countries field is a display only field. You can Add or Delete this list based on your requirements.

    12. Select the Product License from the drop down list. This is the license of the primary (company) product participating in the study.

    13. Enter the Product Abbreviation.

  10. The Centers are displayed as per the centers you choose to associate with the Study. To modify this list, click on Modify (placed next to Centers). Using this option you can add and delete Centers associated with the Study.

    Tip:

    • To add more Centers to the Study Center list, use the Add>>/Add All options.

    • To delete the Centers from the Study Center list, use the Delete>>/Delete All options.

  11. Enter the Study Description associated with the Study.

  12. Click Select placed next to Investigator Alert to select or create an Advanced Condition for this Study.

    Tip:

    Click here for details on Advanced Conditions
  13. Select Study is eligible for Unblinding to enable the study to be unblinded.

  14. Select Enable Study Specific Encoding to enable the study specific Auto Encoding.

Configuring Auto Encoding

The Auto Encoding features helps you to configure your own dictionary of encoded data. Using this enables you to:

  • Configure studies to use dictionaries different from the dictionaries configured using the Case Form configuration.

  • Retrieve coded Events, Drugs and Indications and codes from the drop-down lists associated with this section.

  • Ensure that the expedited reports display the correct verbatim and coded terms

To configure Auto Encoding

  1. Click Auto Encoding to open the Auto Encoding dialog. The Auto Encoding dialog opens.

  2. Select the encoding options as required for Drugs, Indications and Event Terms. Use the items in the drop-down list to encode.

  3. Select Prevent manual encoding for event terms if you want to disable manual encoding by users.

  4. Select the Require event term encoding before case closure, to ensure that the expedited reports display the correct verbatim and coded terms.

    Note:

    If this feature is not selected, then the study will use the dictionaries configured using the Case Form Configuration options.

    Cases where the report type does not include clinical trial cases, will always encode with the dictionaries configured through the Case Form configuration options.

  5. Select Inherit Reporting Rules From using the drop-down list to configure study-based reporting requirements.

Configuring Study Reporting

Study Reporting is provided in the Study Configuration section to configure study-based reporting requirements.

The reporting rules are not directly defined in the study, but rather identify which reporting rules to check from the already configured expedited reporting rules.

The identification is based on specifying what set of reporting rules to evaluate, as per the criteria of:

  • Country

  • License Type

  • Reporting Destination

To configure study-based reporting

  1. Click Add in the Inherit Reporting Rules From section. The Study Reporting dialog opens.

  2. Select Always Report as required.

    Tip:

    Select this checkbox to force Argus to check for qualifying expedited reporting rules. These rules are based on the country, license type and reporting destination specified. Refer to the Field Descriptions for details.
  3. Select the Country from the drop-down list.

    Tip:

    This field specifies which country's reporting rules should be included. The drop-down list includes countries for which the expedited reporting rules exist.
  4. Select the License Type from the drop-down list.

    Tip:

    This field specifies the license type to be considered for the specified country. Refer to the Field Descriptions for details.
  5. Select the Reporting Destination from the drop-down list.

    Tip:

    This field is optional.
  6. The Time Frame and Possible Report Forms cannot be searched or altered, but is included for informational purposes.

    Tip:

    • To add information pertaining to inheriting reporting rules in the Study Reporting section, click Add

    • To delete information pertaining to inheriting reporting rules in the Study Reporting section, select the reporting rule and click Delete. A pop-up appears asking you to confirm the action.

  7. Click Save to save the changes made to the Studies section.

    Tip:

    If you have added a new Study, click Add Study to save the new Study.

Configuring Expedited Report Rules

This section describes the configuration of Expedited Reports using pre-defined rules. These reports are required by Regulatory Authorities. The Administrator is responsible for entering information about Regulatory Authorities to which regulatory reports will be submitted.

This information is entered in the Regulatory Agency Information screen. Information about the local company contact for a regulatory authority can also be entered in this screen.

Configuration of the expedited report rules is done using the Business Administration -> Expedited Report Rules section shown in the following illustration.

Surrounding text describes exrr.gif.

When configuring expedited reporting rules, be aware of the following:

  • If the user does not have permission to access Advanced Conditions on the Expedited Reporting Rules, the system does the following:

    • Displays the advanced condition name instead of displaying a blank.

    • Does not permit the user to modify or view advanced condition details.

    • Disables the Adv Condition button.

  • The system enables the user configure the Blinding Study Products option for those included in the case (default unchecked).

    • The system track updates to this field in the audit log.

    • The Reporting Rules reports print the new options

  • For cases where expedited reports are due, the user can force-distribute expedited reports even if processing is incomplete.

  • The reporting rules have a Forced Distribute XXX days before due checkbox. The default is unchecked.

    • If the user checks the Force Distribute option, the # of days before due field is entered and automatically checks the Auto Distribute checkbox on the reporting rule (grayed out).

    • The user can enter the number of days from 0 - # of days defined within the time frame.

    • If the user enters a value greater than the defined time frame, the system displays the following message:

      Please enter a value less than the Time Frame defined for the Reporting Rule.

    • If the user has not checked Force Distribute, the system disables the days before due.

  • The system tracks updates made to the new Argus Console fields in the audit log.

  • The system prints an audit log and print out that shows the expedited report rules information.

  • A super rule is a rule that overrides other rules when it finds a match. The super rule function is available to all users and is enabled when you check the "Super Rule -- Cease evaluation of normal rules upon match" checkbox. Be aware of the following:

    • The system executes a super rule before executing any other reporting rules.

    • If a super rule matches, the case information it executes all the super rules but does not execute other rules.

    • If the super rule does not match, the application executes the other rules.

Surrounding text describes exrrinfo.gif.

Field Descriptions

The following table lists and describes the fields in this section.

Field/Control Name Description
Report Name Enables the user to view or enter the name of the Report.
Report Destination Enables the user to select the name of the agency to which the report will be scheduled.
Active Enables the user to specify whether the configured rule is active or inactive.
  • Only active rules are considered for report scheduling.

  • Inactive rules are not checked when the report scheduling algorithm runs.

Auto Distribute Reports Enables you to distribute reports automatically. Except the E2B Reports, all the Expedited Reports that are selected for auto-distribution are tracked under the Worklist--> Bulk Transmit screen. The E2B Reports which are transmitted automatically, are tracked from Worklist--> Bulk Transmit E2B.
Protect Reporter and Patient Confidentiality Enables the user to configure Protect Reporter and Patient Confidentiality
  • If this option checked and a report is generated or draft is viewed, the Patient and Reporter information will be hidden.

  • This option will override the check-boxes on the case form (for Protect Reporter and Protect Patient) if it is checked.

  • If this option is unchecked, the Case Form check-boxes will take effect.

  • The Reports listed below will check for the Reporting Rule Confidentiality Flag:

    • EU Device Initial

    • EU Device Final

    • French CERFA Report

    • CIOMS Report

    • MedWatch Report

    • Vaers Report

HCP Case When checked, the system check for any reporter in the case where HCP=Yes. This enables the report to be scheduled if other parameters for the reporting rules are satisfied.

The default is unchecked.

Report on Study Drug not Administered If this field is not checked and a study drug (any in case) has not administered checked then no report is scheduled.
Active Moiety Enable this check-box to enable rule to act exclusively as an active moiety rule for that country.

When this option is enabled the system will disable and ignore the county when evaluating the domestic/foreign causality sections. Listedness will be evaluated at the case level.

No Follow-up or Downgrade The system does not schedule a follow up or a downgrade report for the case when the initial report was scheduled based on the current rule.
Origin of Events to Include - Domestic Enables the user to select the inclusion of domestic or foreign cases based on their country of incidence.
  • Domestic: The event is marked as Domestic, if the country of incidence appears in the list of selected countries.

  • This list is displayed in the Countries tab, in the List Maintenance Licenses (section) for the license(s) of the suspect product(s) under examination.

Origin of Events to Include - Foreign Enables the user to select the inclusion of domestic or foreign cases based on their country of incidence.
  • Foreign: The event is marked as Foreign, if the country of incidence does not appear in the list of selected countries.

  • This list is displayed in the Countries Tab on List Maintenance License (section) for the license(s) of the suspect product(s) under examination.

Timeframe This field specifies the report's scheduled due-date based on the number of days, after the initial receipt or significant follow-up date.
Form This is the drop-down list of expedited report forms.
Local Comment Type This field is used to extract the local evaluator comment from case data (French CERFA 65-0044, CIOMS-I (Local)).
Clinical Reference Type This field is used to get information from the study configured for a case. The field is only enabled for CIOMS-I (Local) form.
Language Enables the user to select language type.
  • English is the default language of choice.

  • The system does not support other languages at this time.

  • Reports such as the German BfArM, German PEI, and French CERFA can utilize some field values in their corresponding language (For example: narrative).

Message Type Enables you to select the message type.
Message Type Enables the user to select the message type for E2B report forms.
Listedness Enables the user to check if the license being evaluated for reporting is listed. The possible values are:
  • Listed

  • Unlisted

  • Ignore (default)

Seriousness - Fatal/Life Threatening Enables the user to check if the case contains a Death' or Life Threatening' seriousness criteria for the current event being evaluated. The possible values are:
  • Yes

  • No

  • Ignore (default)

Seriousness - Serious (Case) Enables the user to check if case level seriousness assessment is Serious'. The possible values are:
  • Yes

  • No

  • Ignore (default)

Seriousness - Serious (Event) Enables the user to check if the event level seriousness assessment (for any event) is Serious. The possible values are"
  • Yes

  • No

  • Ignore (default)

Seriousness - Severity Enables the user to select a term descriptive of the severity of the event. E.g. Mild, Moderate, severe, unknown.
Product Specific - Family Name Enables the user to configure product specific reporting rules.
Product Specific - Product Group Enables the user to configure product specific reporting rules.

Product Group drop-down always lists the configured Product Groups".

Causality - Most Conservative If this checkbox is marked, the system will look at the event level reported causalities, event level determined causalities and case level causalities, and if any of these three causalities is Yes then the case will be considered Reportable.

If checked, the following options are hidden and set to Ignore":

  • Causality as Reported (Event)

  • Causality as Determined (Event)

  • Causality as Reported (Case)

  • Causality as Determined (Case)

  • Causality is ignored when scheduling reports for non - study cases. This only Study cases.

Causality - Include Non-Clinical Trial Cases Enables you to include the Spontaneous Cases (Non Clinical Trial Cases) for causality assessments.
Causality - Causality as Reported (Event) Assesses As Reported causality in conjunction with the Listed value (if any) specified in the rule for the license/event combination being assessed. Ignored for non-study cases. Only applies to Study cases. The possible values are
  • Reportable

  • Non-reportable

  • Ignore (default)

Causality - Causality as Determined (Event) Assesses As Determined causality in conjunction with the Listed value (if any) specified in the rule for the license/event combination being assessed. Ignored for spontaneous, literature and regulatory authority cases.

Ignored for non - study cases. Only applies to Study cases.

The possible values are:

  • Reportable

  • Non-reportable

  • Ignore (default)

Causality - Causality as Reported (Case) Most conservative of the As Reported causalities in event assessment for ANY event.

Ignored for non - study cases. Only applies to Study cases.

The possible values are:

  • Reportable

  • Non-reportable

  • Ignore (default)

Causality - Causality as Determined (Case) Case Level Causality, as observed on the Analysis tab for the Case Level Causality.

Ignored for non - study cases. Only applies to Study cases.

The possible values are:

  • Reportable

  • Non-reportable

  • Ignore (default)

Advanced Conditions This field enables the selection of an advanced condition to further restrict cases that meet the criteria for the rule.
Advanced Conditions - Select Enables the user to open the Advanced Condition Browser.

You can click this button to open the Advanced Conditions browser to select / create an Advanced Condition.

Responsible Group Enables the user to select a group to whom reports scheduled by this rule will be assigned.
Cover Letter Enables the user to use letters that have been configured for reporting template use.
Comments Enables the user to enter reporting rule comments, up to 2000 characters.

Adding Expedited Report Rules

The Reporting Rules configuration feature enables you to define the reporting rules or criteria for the cases to be qualified for expedited reporting.

To add expedited report rules

  1. In the Business Configuration section, select Expedited Report Rules.

  2. In the left panel, select a filtering criterion. The left panel now displays the tree view of the Country/License Type/Reporting Rule based on the filtering criterion.

  3. Select a Reporting Rule and click to view the reporting details in the right panel.

    Note:

    Ensure that you select the reporting rule-level icon/folder to view the details of the reporting rule.

    Surrounding text describes exrr.gif.

    Tip:

    • You can alternatively click Add Rule to create a new reporting rule.

    • Use Copy Rule to make an editable copy of an existing reporting rule, along with all associated expedited reporting rule information.

  4. Enter the Report Name.

  5. Select the Report Destination from the drop-down list. This is the name of the agency to which the report will be scheduled.

  6. Select Auto Distribute Reports to distribute reports automatically.

  7. Select Active to specify if the configured rule is active or inactive.

    Note:

    Only active rules are considered for report scheduling
  8. Select Origin of events to include-Domestic to include domestic cases based on the country of incidence OR Select Origin of events to include-Foreign to include foreign cases based on the country of incidence

  9. Select Report on Study Drug not Administered. This option ensures that all study drugs that are not administered are reported.

  10. Select Active Moiety if you want to enable this option.

  11. Select the required Form from the drop-down list of expedited report forms.

  12. Select the Local Comment Type from the drop-down list. This field is used to extract local evaluator comments from case data.

  13. Select the Clinical Reference Type from the drop-down list. This field is used to obtain information from study configured for a case.

    Tip:

    This field is enabled only for CIOMS-I (Local) form.
  14. Select the Language and Message Type from the drop-down list.

  15. Select the Listedness from the drop-down list. This ensures that the license being evaluated for reporting is listed.

  16. Select the Seriousness- Fatal/Life Threatening option from the drop-down list. This field ensures that cases that contain Death or Life Threatening seriousness criteria for an event are evaluated.

  17. Select the Seriousness- Serious (Event) option from the drop-down list. Enable this field to check if the event level seriousness assessment is Serious

  18. Select the Seriousness- Serious (Case) option from the drop-down list. Enable this field to check if the case level seriousness assessment is Serious

  19. Select the Seriousness- Serious (Severity) option from the drop-down list.

    This enables you to define the Severity as Mild, Moderate, Severe and Unknown.

  20. Select the Product Specific - Group Name from the drop-down list. This field enables you to configure product specific reporting rules.

  21. Select the Product Specific - Family Name from the drop-down list. This field enables you to configure product specific reporting rules.

  22. Select Causality-Most Conservative. This ensures that the system looks at event level reported causality, event level determined causality and case level causality.

  23. Select Causality-Include Non-Clinical Trial Cases. This enables you to include the Spontaneous Cases (Non Clinical Trial Cases) for causality assessments.

  24. Select Causality - Causality as Reported (Event) as required, from the drop-down list.

  25. Select Causality - Causality as Determined (Event) as required, from the drop-down list.

  26. Select Causality - Causality as Reported (Case) as required, from the drop-down list.

  27. Select Causality - Causality as Reported (Case) as required, from the drop-down list.

  28. Select or create the Advanced Condition to restrict cases to the advanced conditions defined here.

    If any of these three causalities are confirmed, then the case will be considered as reportable.

    Note:

    Use the Advanced Conditions browser to select or create an Advanced Condition by clicking Select.
  29. Select the Responsible Group from the drop-down list. This is the group to which the reports scheduled by this reporting rule will be assigned.

  30. Select the Cover Letter from the drop-down list. Use this field to select cover letters that have been configured for reporting template use.

  31. Enter any regulatory report comments under the Comments text box.

  32. Click Save to save the changes made to this section.

    Tip:

    If you have added a new Reporting Rule, click Add Rule to save the new Expedited Reporting Rule.
About the Filtering Criterion

The filtering criterion is essential as it helps you to search for specific items. The Argus Console provides this option for the Business Configuration section.

Using Organized by

The filtering browser is displayed in the top-left corner of the left panel. The Expedited Report Rules section can be filtered on the basis of any of the five combinations shown in the following illustration.

Surrounding text describes exrrbr.gif.

Consider the following examples:

  • If you enable Organized by Country/License Type/Reporting Rule, then the output generated will be visible in a tree-format, in the left panel, based on the entire categorization of Country, License Type and Reporting Rule.

  • If you enable the Organized by Responsible Group/Reporting Rule, then only the Responsible Group and Reporting Rule views will be available in the tree view in the left panel.

Tip:

  • Enable the Organized By filter for Active Rules, to obtain the list of active reporting rules.

  • Enable the Organized By filter for Inactive Rules, to obtain the list of inactive reporting rules

The Argus Console helps you to filter information further for the Business Configuration section. Once you have selected the Organized by, you can specify whether your search should contain or start with specific alphabets or words.

For example, the filtering criterion defined in the following illustration for all Country/License Type/Reporting Rule data that contain the term Canada.

Surrounding text describes exrrbr2.gif.