|Skip Navigation Links|
|Exit Print View|
|Sun Server X2-8 (formerly Sun Fire X4800 M2) Installation Guide Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library|
Before You Begin
Complete the hardware setup as described in the hardware setup documentation.
Apply standby power for your server. See How to Apply Standby Power for Initial Service Processor Configuration for the location of the power cord connectors.
This is described in How to Connect to Oracle ILOM CLI Using the Serial Management Port.
The SP displays its default command prompt:
show /SP/network Targets: test Properties: commitpending = (Cannot show property) dhcp_server_ip = 22.214.171.124 ipaddress = 126.96.36.199 ipdiscovery = DHCP ipgateway = 188.8.131.52 ipnetmask = 255.255.252.0 macaddress = 00:21:28:44:F4:EE pendingipaddress = 184.108.40.206 pendingipdiscovery = DHCP pendingipgateway = 220.127.116.11 pendingipnetmask = 255.255.252.0 state = enabled switchconf = (none) Commands: cd set show
Oracle ILOM displays network information, including the IP address.