JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Server X2-8 (formerly Sun Fire X4800 M2) Service Manual     Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library
search filter icon
search icon

Document Information

Using This Documentation

Sun Server X2-8 Name Change

Product Downloads

Documentation and Feedback

About This Documentation

Change History

Sun Server X2-8 Service Manual Overview

Server and Component Overview

Sun Server X2-8 Overview

Component Overviews

Power and Reset

Power Modes

Power Button and Power OK LED

How to Power On the Server

How to Power Off the Server

Controlling Server Power Remotely

Removing and Installing Components

Preparing for Service and Operation

Removal and Installation Procedures

Removing and Installing a Power Supply (CRU)

Removing and Installing a Hard Drive (CRU)

Removing and Installing a Hard Drive Filler

Replacing the Hard Drive Backplane (FRU)

Adding, Removing, and Installing a CMOD (CRU)

How to Add a CPU Module (CMOD) to the Server Using the Upgrade Kit

How to Remove a CPU Module (CMOD)

How to Remove the CPU Module (CMOD) Cover

How to Install the CPU Module (CMOD) Cover

How to Install a CPU Module (CMOD)

How to Verify CPLD Versions

CPU Module (CMOD) Designation and Population Rules

Removing and Installing a CMOD Filler

How to Replace the CMOD Battery (CRU)

Removing and Installing DIMMs (CRU)

DIMM Population Rules

Removing and Installing a RAID Expansion Module (CRU)

Removing and Installing a Fabric Expansion Module (CRU)

Replacing a CPU and Heatsink Assembly (FRU)

Removing and Installing a Fan Module (CRU)

Replacing a Fan Module Controller Board (FRU)

Removing and Installing a NEM or a NEM Filler (CRU)

Removing and Installing a PCIe EM (CRU)

Removing and Installing the Service Processor Module (CRU)

Removing and Installing the Multiport Cable

Removing and Installing the Subassembly Module (FRU)

Sun Server X2-8 Service Procedures and Information

Managing FRUID Information

Firmware Information and Procedures

How to Access the BIOS Setup Utility

BIOS Setup Utility Screens

Component LED Locations and Functions

Thermal Sensor Locations

Sun Server X2-8 Specifications

Physical Specifications

Power Specifications

Environmental Specifications

Requesting Physical Media

How to Request Physical Media Online

How To Request Physical Media by Phone


How to Remove the CPU Module (CMOD) Cover


Caution - Component damage due to static electricity. Electronic components are extremely sensitive to static electricity. Ordinary amounts of static electricity from clothing or the work environment can destroy the components. Do not touch the components without antistatic precautions, especially along the connector edges. See Antistatic Precautions and Procedures.

Before You Begin

About Sun Server X2-8 CPU Modules and CMOD Filler Modules

  1. Remove the CMOD. See How to Remove a CPU Module (CMOD).
  2. Press the cover release button on the top of the cover.
    image:CPU module (CMOD) cover removal
  3. Slide the cover toward the back of the CMOD until it stops (approximately 0.5 inch).
  4. To remove, lift the cover straight up.

See Also