Install a Linux OS (Oracle System Assistant)

The Oracle System Assistant Install OS task provides assisted OS installation of a supported versions of the Linux OS.

Before You Begin

• Prepare the server storage drives. For more information, refer to the Sun Blade X3-2B (formerly Sun Blade X6270 M3) Installation Guide.

• Perform the steps in Preparing to Install the OS.

• During the OS installation and configuration process, you might need to provide logical and physical network names. For more information, see Identifying Logical and Physical Network Interface Names for Linux OS Configuration.

• For local installation, have the installation media available to insert into the attached physical CD/DVD-ROM drive when prompted.

• For remote installation, insert the installation media into the Remote Console system’s CD/DVD-ROM drive. Make sure you have selected CD-ROM from the Remote Console Device menu.

• If you are using an ISO image, ensure that the it is accessible from the Remote Console system. Make sure you have selected CD-ROM Image from the Remote Console Device menu.

1. Ensure that the server is in standby power mode.
2. Boot the server and watch the video monitor or Remote Console screen for the prompt to press the F9 key to enter Oracle System Assistant.
3. When the prompt appears, press the F9 key.

   The Oracle System Assistant main screen appears.

   
   
4. To update the Oracle System Assistant application, click the Get Updates button.

   This action ensures that the application has the latest firmware and drivers before you begin the OS installation.

   ---

   Note - Server web access is required to update Oracle System Assistant.

   ---

   
   
5. To update the server firmware, click the Update Firmware button.

   This action ensures that the server has the latest firmware and before you begin the OS installation.

6. To install the OS, click the Install OS button.

   The Install OS screen appears.

   
   
7. From the Select Operating System drop-down list, select the OS.
8. Select the BIOS mode. For more information, refer to Sun Blade X3-2B (formerly Sun Blade X6270 M3) Administration Guide.
9. In the Select your install media location section, indicate the location of the installation media .

   This is the location of the OS distribution media. If you attached a CD/DVD drive, you might need to click the Refresh button to see it in the drop-down list.

10. To select a device, click View Installation Options.

    This is the device on which you install the OS.

    ---

    Caution - Loss of data. The OS installation erases the contents of the disk. All data on the selected disk is erased.

    ---

11. To begin the OS installation, click Install OS
12. Follow the prompts until the installation is finished.

    The server boots.

Next Steps

Installing Server System Tools and Updating Drivers