Skip Headers
Oracle® Complex Event Processing Developer's Guide
11g Release 1 (11.1.1.4.0) for Eclipse

Part Number E14301-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

D Schema Reference: Component Configuration wlevs_application_config.xsd

This appendix describes the elements of the wlevs_application_config.xsd schema.

For more information, see:

D.1 Overview of the Oracle CEP Component Configuration Elements

Oracle CEP provides a number of component configuration elements that you use to define the characteristics of the of the components you declare in the EPN assembly file.

D.1.1 Element Hierarchy

The top-level Oracle CEP component configuration elements are organized into the following hierarchy:

Example D-10 coherence-caching-system Element Hierarchy

coherence-caching-system
    name
    coherence-cache-config
    coherence-cluster-config

D.1.2 Example of an Oracle CEP Component Configuration File

The following sample component configuration file from the HelloWorld application shows how to use many of the Oracle CEP elements:

<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <processor>
        <name>helloworldProcessor</name>
        <rules>
            <query id="helloworldRule">
                <![CDATA[ select * from helloworldInputChannel [Now] ]]>
            </query>
        </rules>
    </processor>
    <channel>
        <name>helloworldInputChannel</name>
        <max-size>10000</max-size>
        <max-threads>2</max-threads>
    </channel>
    <channel>
        <name>helloworldOutputChannel</name>
        <max-size>10000</max-size>
        <max-threads>2</max-threads>
    </channel>
</n1:config>

D.2 accept-backlog

Use this element to define the maximum number of pending connections allowed on a socket. This element is only applicable in a netio element.

D.2.1 Child Elements

The accept-backlog component configuration element has no child elements.

D.2.2 Attributes

The accept-backlog component has no attributes.

D.2.3 Example

The following example shows how to use the accept-backlog element in the component configuration file:

<netio>        <provider-name>providerCache</provider-name>
        <num-threads>1000</num-threads>
        <accept-backlog>50</accept-backlog>
</netio>

D.3 adapter

Use this element to define a custom adapter component. For an HTTP publish-subscribe or JMS adapter, use the specific http-pub-sub-adapter and jms-adapter elements.

For more information, see Chapter 14, "Configuring Custom Adapters".

D.3.1 Child Elements

The adapter component configuration element supports the following child elements:

D.3.2 Attributes

The adapter component configuration element has no attributes.

D.3.3 Example

The following example shows how to use the adapter element in the component configuration file:

<adapter>
    <name>trackdata</name>
    <symbols>
        <symbol>BEAS</symbol>
        <symbol>IBM</symbol>
    </symbols>
 </adapter>

In the example, the adapter's unique identifier is trackdata.

D.4 amount

Use this element to define the a time duration of a diagnostic profile. This element is applicable in any of the following elements:

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.4.1 Child Elements

The amount component configuration has no child elements:

D.4.2 Attributes

The amount component has no attributes.

D.4.3 Example

The following example shows how to use the amount element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.5 application

Use this element to define the type of application Oracle CEP server applies to a foreign stage. In a diagnostic profile, this element always has a value of diagnostic.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.5.1 Child Elements

The application component configuration has no child elements:

D.5.2 Attributes

The application component has no attributes.

D.5.3 Example

The following example shows how to use the application element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.6 average-interval

Use this element to define the time interval for which you want to gather metrics.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.6.1 Child Elements

The average-interval component configuration element supports the following child elements:

D.6.2 Attributes

The average-interval component has no attributes.

D.6.3 Example

The following example shows how to use the average-interval element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <throughput>
            <throughput-interval>
                <amount>100000</amount>
                <unit>MICROSECONDS</unit>
            </throughput-interval>
            <average-interval>
                <amount>100000000</amount>
                <unit>NANOSECONDS</unit>
            </average-interval>
            <location>
                <application>diagnostic</application>
                <stage>AlertEventStream</stage>
                <direction>INBOUND</direction>
            </location>
        </throughput>
    </profile>
</diagnostic-profiles>

D.7 average-latency

Use this element to define an average latency calculation in a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.7.1 Child Elements

The average-latency component configuration element supports the following child elements:

D.7.2 Attributes

The average-latency component has no attributes.

D.7.3 Example

The following example shows how to use the average-latency element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <average-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
            <threshhold>
                <amount>100</amount>
                <unit>MILLISECONDS</unit>
            </threshhold>
        </average-latency>
    </profile>
</diagnostic-profiles>

D.8 batch-size

Use this element to define the number of updates that are picked up from the store buffer to write back to the backing store. This element may be changed dynamically.

D.8.1 Child Elements

The batch-size component configuration element has no child elements.

D.8.2 Attributes

The batch-size component has no attributes.

D.8.3 Example

The following example shows how to use the batch-size element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.9 batch-time-out

Use this element to define The number of seconds event buffer will wait to accumulate batch-size number of events before to write to the event store.

D.9.1 Child Elements

The batch-time-out component configuration element has no child elements.

D.9.2 Attributes

The batch-time-out component has no attributes.

D.9.3 Example

The following example shows how to use the batch-time-out element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.10 binding

Use this element to define values for a parameterized Oracle CQL or EPL rule in an EPL processor component.

For more information, see:

D.10.1 Child Elements

The binding component configuration element supports the following child elements:

D.10.2 Attributes

Table D-1 lists the attributes of the binding component configuration element.

Table D-1 Attributes of the binding Component Configuration Element

Attribute Description Data Type Required?

id

The identifier of the EPL rule to which this binding applies.

String

Yes.


D.10.3 Example

The following example shows how to use the binding element in the component configuration file:

<processor>
    <name>processor1</name>
        <record-parameters>
            <dataset-name>test1data</dataset-name>
            <event-type-list>
                <event-type>SimpleEvent</event-type>
            </event-type-list>
            <provider-name>test-rdbms-provider</provider-name>
            <batch-size>1</batch-size>
            <batch-time-out>10</batch-time-out>
        </record-parameters>
        <rules>
            <rule id="rule1"><![CDATA[
                select stockSymbol, avg(price) as percentage
                from StockTick retain 5 events
                where stockSymbol=?
                having avg(price)  > ? or avg(price)  < ?
            ]]></rule>
        </rules>
        <bindings>
            <binding id="rule1">
                <params>BEAS,10.0,-10.0</params>
                <params id="IBM">IBM,5.0,5.0</params>
            </binding>
        </bindings>
</processor>

D.11 bindings (jms-adapter)

Using the com.oracle.cep.cluster.hagroups.ActiveActiveGroupBean, you can partition an incoming JMS stream in Oracle CEP applications by utilizing the notification groups that the ActiveActiveGroupBean creates.

Use this element to associate a notification group with a particular message-selector value.

For more information, see Section 22.2.2, "ActiveActiveGroupBean".

D.11.1 Child Elements

The bindings component configuration element supports the following child elements:

D.11.2 Attributes

The bindings component has no attributes.

D.11.3 Example

The following example shows how to use the bindings element in the component configuration file:

<jms-adapter>
    <name>JMSInboundAdapter</name>
    <event-type>StockTick</event-type>
    <jndi-provider-url>t3://ppurich-pc:7001</jndi-provider-url>
    <destination-jndi-name>./Topic1</destination-jndi-name>
    <user>weblogic</user>
    <password>weblogic1</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>true</session-transacted>
    <message-selector>${CONDITION}</message-selector>
    <bindings>
        <group-binding group-id="ActiveActiveGroupBean_group1">
            <param id="CONDITION">acctid > 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group2">
            <param id="CONDITION">acctid BETWEEN 301 AND 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group3">
            <param id="CONDITION">acctid BETWEEN 201 AND 300</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group4">
            <param id="CONDITION">acctid <= 200</param>
        </group-binding>
     </bindings>
</jms-adapter>

In this configuration, when the application is deployed to an Oracle CEP server with a cluster element groups child element that contains ActiveActiveGroupBean_group1, then the CONDITION parameter is defined as acctid > 400 and the application processes events whose acctid property is greater than 400.

D.12 bindings (processor)

Use this element to define bindings for one or more parameterized Oracle CQL or EPL rules in a processor component.

For more information, see:

D.12.1 Child Elements

The bindings component configuration element supports the following child elements:

D.12.2 Attributes

The bindings component has no attributes.

D.12.3 Example

The following example shows how to use the bindings element in the component configuration file:

<processor>
    <name>processor1</name>
        <record-parameters>
            <dataset-name>test1data</dataset-name>
            <event-type-list>
                <event-type>SimpleEvent</event-type>
            </event-type-list>
            <provider-name>test-rdbms-provider</provider-name>
            <batch-size>1</batch-size>
            <batch-time-out>10</batch-time-out>
        </record-parameters>
        <rules>
            <rule id="rule1"><![CDATA[
                select stockSymbol, avg(price) as percentage
                from StockTick retain 5 events
                where stockSymbol=?
                having avg(price)  > ? or avg(price)  < ?
            ]]></rule>
        </rules>
        <bindings>
            <binding id="rule1">
                <params>BEAS,10.0,-10.0</params>
                <params id="IBM">IBM,5.0,5.0</params>
            </binding>
        </bindings>
</processor>

D.13 buffer-size

Use this element to define the size of the internal store buffer that's used to temporarily hold asynchronous updates that need to be written to the store. Does not support dynamic updates.

D.13.1 Child Elements

The buffer-size component configuration element has no child elements.

D.13.2 Attributes

The buffer-size component has no attributes.

D.13.3 Example

The following example shows how to use the buffer-size element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-behind>
            <work-manager-name>JettyWorkManager</work-manager-name>
            <batch-size>100</batch-size>
            <buffer-size>100</buffer-size>
            <buffer-write-attempts>100</buffer-write-attempts>
            <buffer-write-timeout>100</buffer-write-timeout>
        </write-behind>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.14 buffer-write-attempts

Use this element to define the number of attempts that the user thread will make to write to the store buffer. The user thread is the thread that creates or updates a cache entry. If the user thread cannot write to the store buffer (all write attempts fail), it will invoke the store synchronously. This element may be changed dynamically.

D.14.1 Child Elements

The buffer-write-attempts component configuration element has no child elements.

D.14.2 Attributes

The buffer-write-attempts component has no attributes.

D.14.3 Example

The following example shows how to use the buffer-write-attempts element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-behind>
            <work-manager-name>JettyWorkManager</work-manager-name>
            <batch-size>100</batch-size>
            <buffer-size>100</buffer-size>
            <buffer-write-attempts>100</buffer-write-attempts>
            <buffer-write-timeout>100</buffer-write-timeout>
        </write-behind>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.15 buffer-write-timeout

Use this element to define the time in milliseconds that the user thread will wait before aborting an attempt to write to the store buffer. The attempt to write to the store buffer fails only in case the buffer is full. After the timeout, further attempts may be made to write to the buffer based on the value of buffer-write-attempts. This element may be changed dynamically.

D.15.1 Child Elements

The buffer-write-timeout component configuration element has no child elements.

D.15.2 Attributes

The buffer-write-timeout component has no attributes.

D.15.3 Example

The following example shows how to use the buffer-write-timeout element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-behind>
            <work-manager-name>JettyWorkManager</work-manager-name>
            <batch-size>100</batch-size>
            <buffer-size>100</buffer-size>
            <buffer-write-attempts>100</buffer-write-attempts>
            <buffer-write-timeout>100</buffer-write-timeout>
        </write-behind>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.16 cache

Use this element to define a cache for a component. A cache is a temporary storage area for events, created exclusively to improve the overall performance of your Oracle CEP application; it is not necessary for the application to function correctly. Oracle CEP applications can optionally publish or consume events to and from a cache to increase the availability of the events and increase the performance of their applications.

For more information, see Section 12.2, "Configuring an Oracle CEP Local Caching System and Cache".

D.16.1 Child Elements

The cache component configuration element supports the following child elements:

D.16.2 Attributes

The cache component has no attributes.

D.16.3 Example

The following example shows how to use the cache element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.17 caching-system

Use this element to define an Oracle CEP local caching system component. A caching system refers to a configured instance of a caching implementation. A caching system defines a named set of configured caches as well as the configuration for remote communication if any of the caches are distributed across multiple machines.

For more information, see Section 12.2.1, "Configuring an Oracle CEP Local Cache as an Event Listener".

D.17.1 Child Elements

The caching-system component configuration element supports the following child elements:

D.17.2 Attributes

The caching-system component has no attributes.

D.17.3 Example

The following example shows how to use the caching-system element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

In the example, the channel's unique identifier is providerCachingSystem.

D.18 channel

Use this element to define a channel component. An Oracle CEP application contains one or more channel components that represent the physical conduit through which events flow between other types of components, such as between adapters and processors, and between processors and event beans (business logic POJOs).

D.18.1 Child Elements

The channel component configuration element supports the following child elements:

D.18.2 Attributes

The channel component has no attributes.

D.18.3 Example

The following example shows how to use the channel element in the component configuration file:

<channel>
    <name>MatchOutputChannel</name>
    <max-size>0</max-size>
    <max-threads>0</max-threads>
    <selector>match</selector>
</channel>

In the example, the channel's unique identifier is MatchOutputChannel.

D.19 channel (http-pub-sub-adapter Child Element)

Use the channel element to specify the channel that the http-pub-sub-adapter publishes or subscribes to, whichever is appropriate, for all http-pub-sub-adapter, whether they are local or remote or for publishing or subscribing.

D.19.1 Child Elements

The channel component configuration element has no child elements.

D.19.2 Attributes

The channel component has no attributes.

D.19.3 Example

The following example shows how to use the channel element in the component configuration file:

<http-pub-sub-adapter>
    <name>localPublisher</name>
    <server-context-path>/pubsub</server-context-path>
    <channel>/channel2</channel>
</http-pub-sub-adapter>

In the example, the localPublisher pub-sub adapter publishes to a local channel with pattern /channel2.

D.20 coherence-cache-config

Use this element to define the Oracle Coherence cache configuration for a coherence-caching-system.

For more information, see Section 12.2, "Configuring an Oracle CEP Local Caching System and Cache".

D.20.1 Child Elements

The coherence-cache-config component configuration element has no child elements.

D.20.2 Attributes

The coherence-cache-config component has no attributes.

D.20.3 Example

The following example shows how to use the coherence-cache-config element in the component configuration file:

<coherence-caching-system>
    <name>nativeCachingSystem</name>
    <coherence-cache-config>
        applications/cache_cql/coherence/coherence-cache-config.xml
    </coherence-cache-config></coherence-caching-system>

D.21 coherence-caching-system

Use this element to define an Oracle Coherence caching system component. A caching system refers to a configured instance of a caching implementation. A caching system defines a named set of configured caches as well as the configuration for remote communication if any of the caches are distributed across multiple machines.

For more information, see Section 12.3, "Configuring an Oracle Coherence Caching System and Cache".

D.21.1 Child Elements

The coherence-caching-system component configuration element supports the following child elements:

D.21.2 Attributes

The coherence-caching-system component has no attributes.

D.21.3 Example

The following example shows how to use the coherence-caching-system element in the component configuration file:

<coherence-caching-system>
    <name>nativeCachingSystem</name>
    <coherence-cache-config>
        applications/cache_cql/coherence/coherence-cache-config.xml
    </coherence-cache-config>
</coherence-caching-system>

In the example, the channel's unique identifier is nativeCachingSystem.

D.22 coherence-cluster-config

Use this element to define the Oracle Coherence cluster configuration for a coherence-caching-system.

For more information, see "Overview of Oracle CEP Multi-Server Domain Administration" in the Oracle Complex Event Processing Administrator's Guide.

D.22.1 Child Elements

The coherence-cache-config component configuration element has no child elements.

D.22.2 Attributes

The coherence-cache-config component has no attributes.

D.22.3 Example

The following example shows how to use the coherence-cache-config element in the component configuration file:

<coherence-caching-system>
    <name>nativeCachingSystem</name>
    <coherence-cluster-config>
        applications/cluster_cql/coherence/coherence-cluster-config.xml
    </coherence-cluster-config></coherence-caching-system>

D.23 collect-interval

Use this element to define the collection interval of an average-latency or max-latency element in a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.23.1 Child Elements

The collect-interval component configuration element supports the following child elements:

D.23.2 Attributes

The collect-interval component has no attributes.

D.23.3 Example

The following example shows how to use the collect-interval element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.24 concurrent-consumers

Use this element to define the number of consumers to create. Default value is 1.

If you set this value to number greater than one, be sure that your converter bean is thread-safe because the converter bean will be shared among the consumers.

If concurrent-consumers is greater than 1 and you want all the consumers to be run concurrently, then consider how you configure the work-manager you associate with this JMS adapter:

For more information, see:

D.24.1 Child Elements

The concurrent-consumers component configuration element has no child elements.

D.24.2 Attributes

The concurrent-consumers component has no attributes.

D.24.3 Example

The following example shows how to use the concurrent-consumers element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.25 connection-jndi-name

Use this optional element to define a JNDI name of the JMS connection factory. Default value is weblogic.jms.ConnectionFactory for Oracle CEP server JMS.

D.25.1 Child Elements

The connection-jndi-name component configuration element has no child elements.

D.25.2 Attributes

The connection-jndi-name component has no attributes.

D.25.3 Example

The following example shows how to use the connection-jndi-name element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.26 connection-encrypted-password

Use the connection-encrypted-password element to define the encrypted jms-adapter password that Oracle CEP uses when it acquires a connection to the JMS service provider.

When Oracle CEP calls the createConnection method on the javax.jms.ConnectionFactory to create a connection to the JMS destination (JMS queue or topic), it uses the connection-user and connection-password or connection-encrypted-password element, if configured. Otherwise, Oracle CEP uses the user and password (or encrypted-password) elements.

Use either connection-encrypted-password or connection-password but not both.

For more information, see Section 7.4, "Encrypting Passwords in the JMS Adapter Component Configuration File".

D.26.1 Child Elements

The connection-encrypted-password component configuration element has no child elements.

D.26.2 Attributes

The connection-encrypted-password component has no attributes.

D.26.3 Example

The following example shows how to use the connection-encrypted-password element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
    <connection-user>wlevscon</user>
    <encrypted-password>{Salted-3DES}s4YUEvH4Wl2DAjb45iJnrw==</encrypted-password>
</http-pub-sub-adapter>

D.27 connection-password

Use the connection-password element to define the jms-adapter password that Oracle CEP uses when it acquires a connection to the JMS service provider.

When Oracle CEP calls the createConnection method on the javax.jms.ConnectionFactory to create a connection to the JMS destination (JMS queue or topic), it uses the connection-user and connection-password or connection-encrypted-password element, if configured. Otherwise, Oracle CEP uses the user and password (or encrypted-password) elements.

Use either connection-password or connection-encrypted-password but not both.

D.27.1 Child Elements

The connection-password component configuration element has no child elements.

D.27.2 Attributes

The connection-password component has no attributes.

D.27.3 Example

The following example shows how to use the connection-password element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
    <connection-user>wlevscon</user>
    <connection-password>wlevscon</password>
</http-pub-sub-adapter>

D.28 connection-user

Use the connection-user element to define the jms-adapter user name that Oracle CEP uses when it acquires a connection to the JMS service provider.

When Oracle CEP calls the createConnection method on the javax.jms.ConnectionFactory to create a connection to the JMS destination (JMS queue or topic), it uses the connection-user and connection-password or connection-encrypted-password element, if configured. Otherwise, Oracle CEP uses the user and password (or encrypted-password) elements.

You can use the connection-user and connection-password (or connection-encrypted-password) settings in applications where one security provider is used for JNDI access and a separate security provider is used for JMS access.

D.28.1 Child Elements

The connection-user component configuration element has no child elements.

D.28.2 Attributes

The connection-user component has no attributes.

D.28.3 Example

The following example shows how to use the connection-user element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
    <connection-user>wlevscon</user>
    <connection-password>wlevscon</password>
</http-pub-sub-adapter>

D.29 database

Use this element to define a database reference for an EPL processor component.

For more information, see Chapter 11, "Configuring EPL Processors".

D.29.1 Child Elements

The database component configuration element has no child elements.

D.29.2 Attributes

Table D-2 lists the attributes of the database component configuration element.

Table D-2 Attributes of the database Component Configuration Element

Attribute Description Data Type Required?

name

Unique identifier for this query.

String

Yes.

data-source-name

The name of the data source as defined in the Oracle CEP server config.xml file.

String

Yes.


D.29.3 Example

The following example shows how to use the database element in the component configuration file:

<processor>
    <name>proc</name>
    <rules>
        <rule id="rule1"><![CDATA[ 
            SELECT symbol, price
            FROM ExchangeEvent retain 1 event, 
            StockDb ('SELECT symbol FROM Stock WHERE symbol = ${symbol}')
        ]]></rule>
    </rules>

    <database name="StockDb" data-source-name="StockDs" />

</processor>

D.30 dataset-name

Use this element to define the group of data that the user wants to group together. In the case of the Oracle RDBMS-based provider, it specifies the database area, or schema, in which the tables that store the recorded events are created. When configuring the Oracle RDBMS-based provider, you are required to specify this element.

D.30.1 Child Elements

The dataset-name component configuration element has no child elements.

D.30.2 Attributes

The dataset-name component has no attributes.

D.30.3 Example

The following example shows how to use the dataset-name element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.31 delivery-mode

Use this element to define the delivery mode for a jms-adapter.

Valid values are:

D.31.1 Child Elements

The delivery-mode component configuration element has no child elements.

D.31.2 Attributes

The delivery-mode component has no attributes.

D.31.3 Example

The following example shows how to use the delivery-mode element in the component configuration file:

<jms-adapter>
    <name>jmsOutbound-map</name>
    <event-type>JMSTestEvent</event-type>
    <jndi-provider-url>t3://localhost:7001</jndi-provider-url>
    <destination-jndi-name>Topic1</destination-jndi-name>
    <delivery-mode>nonpersistent</delivery-mode>
</jms-adapter>

D.32 destination-jndi-name

Use this required element to define the JMS destination name for a jms-adapter.

Specify either the JNDI name or the actual destination-name, but not both.

D.32.1 Child Elements

The destination-jndi-name component configuration element has no child elements.

D.32.2 Attributes

The destination-jndi-name component has no attributes.

D.32.3 Example

The following example shows how to use the destination-jndi-name element in the component configuration file:

<jms-adapter>
    <name>jmsOutbound-map</name>
    <event-type>JMSTestEvent</event-type>
    <jndi-provider-url>t3://localhost:7001</jndi-provider-url>
    <destination-jndi-name>Topic1</destination-jndi-name>
    <delivery-mode>nonpersistent</delivery-mode>
</jms-adapter>

D.33 destination-name

Use this required element to define the JMS destination name for a jms-adapter.

Specify either the actual destination name or the destination-jndi-name, but not both.

D.33.1 Child Elements

The destination-name component configuration element has no child elements.

D.33.2 Attributes

The destination-name component has no attributes.

D.33.3 Example

The following example shows how to use the destination-name element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.34 diagnostic-profiles

Use this element to define one or more Oracle CEP diagnostic profiles.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.34.1 Child Elements

The diagnostics-profiles component configuration element supports the following child elements:

D.34.2 Attributes

The diagnostics-profiles component has no attributes.

D.34.3 Example

The following example shows how to use the diagnostics-profiles element in the component configuration file:

<diagnostics-profiles>
    <name>myDiagnosticProfiles</name>
    <profile>
        ...
    </profile>
</diagnostics-profiles>

In the example, the channel's unique identifier is myDiagnosticProfiles.

D.35 direction

Use this element to define the direction for a diagnostic profile end-location or start-location.

Valid values are:

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.35.1 Child Elements

The direction component configuration has no child elements:

D.35.2 Attributes

The direction component has no attributes.

D.35.3 Example

The following example shows how to use the direction element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.36 duration

Use this element to define a time duration for a schedule-time-range-offset or time-range-offset element in the form:

HH:MM:SS

Where: HH is a number of hours, MM is a number of minutes, and SS is a number of seconds.

D.36.1 Child Elements

The duration component configuration element has no child elements.

D.36.2 Attributes

The duration component has no attributes.

D.36.3 Example

The following example shows how to use the duration element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range-offset>
        <start>2010-01-20T05:00:00</start>
        <duration>03:00:00</duration>
    </time-range-offset>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.37 enabled

Use this element to define whether or not a diagnostic profile is enabled.

Valid values are:

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.37.1 Child Elements

The enabled component configuration element has no child elements.

D.37.2 Attributes

The enabled component has no attributes.

D.37.3 Example

The following example shows how to use the enabled element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.38 encrypted-password

Use the encrypted-password element in the following parent elements:

Use either encrypted-password or password but not both.

For more information, see Section 7.4, "Encrypting Passwords in the JMS Adapter Component Configuration File".

D.38.1 Child Elements

The encrypted-password component configuration element has no child elements.

D.38.2 Attributes

The encrypted-password component has no attributes.

D.38.3 Example

The following example shows how to use the encrypted-password element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <encrypted-password>{Salted-3DES}s4YUEvH4Wl2DAjb45iJnrw==</encrypted-password>
</http-pub-sub-adapter>

D.39 end

Use this element to define an end time for a time-range or schedule-time-range element.

Express the end time as an XML Schema dateTime value of the form:

yyyy-mm-ddThh:mm:ss

For example, to specify that play back should start on January 20, 2010, at 5:00am and end on January 20, 2010, at 6:00 pm, enter the following:

<time-range>
    <start>2010-01-20T05:00:00</start>
    <end>2010-01-20T18:00:00</end>
  </time-range>

For complete details of the XML Schema dateTime format, see http://www.w3.org/TR/xmlschema-2/#dateTime-lexical-representation.

D.39.1 Child Elements

The end component configuration element has no child elements.

D.39.2 Attributes

The end component has no attributes.

D.39.3 Example

The following example shows how to use the end element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range>
        <start>2010-01-20T05:00:00</start>
        <end>2010-01-20T18:00:00</end>
    </time-range>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.40 end-location

Use this element to define the end location of a average-latency or max-latency element in a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.40.1 Child Elements

The end-location component configuration element supports the following child elements:

D.40.2 Attributes

The end-location component has no attributes.

D.40.3 Example

The following example shows how to use the end-location element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.41 event-bean

Use this element to define an event bean component.

For more information, see Chapter 15, "Configuring Custom Event Beans".

D.41.1 Child Elements

The event-bean component configuration element supports the following child elements:

D.41.2 Attributes

The event-bean component has no attributes.

D.41.3 Example

The following example shows how to use the event-bean element in the component configuration file:

<event-bean>
    <name>myEventBean</name>
</event-bean>

In the example, the channel's unique identifier is myEventBean.

D.42 event-type

Use the event-type element in the following parent elements:

The value of the event-type element must be one of the event types you defined in your event type repository. For more information, see Section 1.1.2, "Oracle CEP Event Types".

D.42.1 Child Elements

The event-type component configuration element has no child elements.

D.42.2 Attributes

The event-type component has no attributes.

D.42.3 Example

The following example shows how to use the event-type element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.43 event-type-list

Use this element to define one or more events for record or playback for a component.

D.43.1 Child Elements

The event-type-list component configuration element supports the following child elements:

D.43.2 Attributes

The event-type-list component has no attributes.

D.43.3 Example

The following example shows how to use the event-type-list element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.44 eviction-policy

Use this element to define the eviction policy the cache uses when max-size is reached.

Valid values are:

D.44.1 Child Elements

The eviction-policy component configuration element has no child elements.

D.44.2 Attributes

The eviction-policy component has no attributes.

D.44.3 Example

The following example shows how to use the eviction-policy element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.45 group-binding

Edit the component configuration file to add group-binding child elements to the jms-adapter element for the JMS inbound adapters.

Add one group-binding element for each possible JMS message-selector value.

For more information, see Section D.11, "bindings (jms-adapter)".

D.45.1 Child Elements

The group-binding component configuration element supports the following child elements:

D.45.2 Attributes

Table D-3 lists the attributes of the group-binding component configuration element.

Table D-3 Attributes of the group-binding Component Configuration Element

Attribute Description Data Type Required?

group-id

The name of a cluster element groups child element.

String

Yes.


D.45.3 Example

The following example shows how to use the group-binding element in the component configuration file:

<jms-adapter>
    <name>JMSInboundAdapter</name>
    <event-type>StockTick</event-type>
    <jndi-provider-url>t3://ppurich-pc:7001</jndi-provider-url>
    <destination-jndi-name>./Topic1</destination-jndi-name>
    <user>weblogic</user>
    <password>weblogic1</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>true</session-transacted>
    <message-selector>${CONDITION}</message-selector>
    <bindings>
        <group-binding group-id="ActiveActiveGroupBean_group1">
            <param id="CONDITION">acctid > 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group2">
            <param id="CONDITION">acctid BETWEEN 301 AND 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group3">
            <param id="CONDITION">acctid BETWEEN 201 AND 300</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group4">
            <param id="CONDITION">acctid <= 200</param>
        </group-binding>
     </bindings>
</jms-adapter>

In this configuration, when the application is deployed to an Oracle CEP server with a cluster element groups child element that contains ActiveActiveGroupBean_group1, then the CONDITION parameter is defined as acctid > 400 and the application processes events whose acctid property is greater than 400.

D.46 heartbeat

Use this element to define a heartbeat timeout for a system-timestamped channel component.

For system-timestamped relations or streams, time is dependent upon the arrival of data on the relation or stream data source. Oracle CEP generates a heartbeat on a system timestamped relation or stream if there is no activity (no data arriving on the stream or relation's source) for more than this number of nanoseconds. Either the relation or stream is populated by its specified source or Oracle CEP generates a heartbeat every heartbeat number of nanoseconds.

The heartbeat child element applies to system-timestamped relations or streams only when no events arrive in the event channels that are feeding the processors and the processor has been configured with a statement that includes some temporal operator, such as a time-based window or a pattern matching with duration.

D.46.1 Child Elements

The heartbeat component configuration element has no child elements.

D.46.2 Attributes

The heartbeat component configuration element has no attributes.

D.46.3 Example

The following example shows how to use the heartbeat element in the component configuration file:

<channel>
    <name>MatchOutputChannel</name>
    <max-size>0</max-size>
    <max-threads>0</max-threads>
    <selector>match</selector>
    <heartbeat>10000</heartbeat>
</channel>

In the example, the channel's unique identifier is MatchOutputChannel.

D.47 http-pub-sub-adapter

Use this element to define an HTTP publish-subscribe server adapter component.

For more information, see Chapter 8, "Configuring HTTP Publish-Subscribe Server Adapters".

D.47.1 Child Elements

The http-pub-sub-adapter component configuration element supports the following child elements:

D.47.2 Attributes

The http-pub-sub-adapter component configuration element has no attributes.

D.47.3 Example

The following example shows how to use the http-pub-sub-adapter element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
</http-pub-sub-adapter>

In the example, the adapter's unique identifier is remotePub.

D.48 idle-time

Use this element to define the number of milliseconds a cache entry may not be accessed before being actively removed from the cache. By default, there is no idle-time set. This element may be changed dynamically.

D.48.1 Child Elements

The idle-time component configuration element has no child elements.

D.48.2 Attributes

The idle-time component has no attributes.

D.48.3 Example

The following example shows how to use the idle-time element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.49 jms-adapter

Use this element to define a JMS adapter component.

For more information, see Chapter 7, "Configuring JMS Adapters".

D.49.2 Attributes

The jms-adapter component configuration element has no attributes.

D.49.3 Example

The following example shows how to use the jms-adapter element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <jndi-provider-url>t3://localhost:7001</jndi-provider-url>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

In the example, the adapter's unique identifier is jmsInbound-text.

D.50 jndi-factory

Use this optional element to define a JNDI factory for a jms-adapter. The JNDI factory name. Default value is weblogic.jndi.WLInitialContextFactory, for Oracle CEP server JMS

D.50.1 Child Elements

The jndi-factory component configuration element has no child elements.

D.50.2 Attributes

The jndi-factory component has no attributes.

D.50.3 Example

The following example shows how to use the jndi-provider-url element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <jndi-factory>weblogic.jndi.WLInitialContextFactory</jndi-factory>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.51 jndi-provider-url

Use this required element to define a JNDI provider URL for a jms-adapter.

D.51.1 Child Elements

The jndi-provider-url component configuration element has no child elements.

D.51.2 Attributes

The jndi-provider-url component has no attributes.

D.51.3 Example

The following example shows how to use the jndi-provider-url element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <jndi-provider-url>t3://localhost:7001</jndi-provider-url>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.52 listeners

Use this element to define the behavior for cache listeners.

The listeners element has a single child element, work-manager-name, that specifies the work manager to be used for asynchronously invoking listeners. This value is ignored if synchronous invocations are enabled. If a work manager is specified for the cache itself, this value overrides it for invoking listeners only.

D.52.1 Child Elements

The listeners component configuration element supports the following child elements:

D.52.2 Attributes

Table D-4 lists the attributes of the listeners component configuration element.

Table D-4 Attributes of the listeners Component Configuration Element

Attribute Description Data Type Required?

asynchronous

Execute listeners asynchronously.

Valid values are true and false. Default value is false.

Boolean

No.


D.52.3 Example

The following example shows how to use the listeners element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-behind>
            <work-manager-name>JettyWorkManager</work-manager-name>
            <batch-size>100</batch-size>
            <buffer-size>100</buffer-size>
            <buffer-write-attempts>100</buffer-write-attempts>
            <buffer-write-timeout>100</buffer-write-timeout>
        </write-behind>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.53 location

Use this element to define the location of a throughput element in a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.53.1 Child Elements

The location component configuration element supports the following child elements:

D.53.2 Attributes

The location component has no attributes.

D.53.3 Example

The following example shows how to use the location element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <throughput>
            <throughput-interval>
                <amount>100000</amount>
                <unit>MICROSECONDS</unit>
            </throughput-interval>
            <average-interval>
                <amount>100000000</amount>
                <unit>NANOSECONDS</unit>
            </average-interval>
            <location>
                <application>diagnostic</application>
                <stage>AlertEventStream</stage>
                <direction>INBOUND</direction>
            </location>
        </throughput>
    </profile>
</diagnostic-profiles>

D.54 max-latency

Use this element to define the maximum latency calculation of a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.54.1 Child Elements

The max-latency component configuration element supports the following child elements:

D.54.2 Attributes

The max-latency component has no attributes.

D.54.3 Example

The following example shows how to use the max-latency element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.55 max-size

Use the max-size element in the following parent elements:

D.55.1 Child Elements

The max-size component configuration element has no child elements.

D.55.2 Attributes

The max-size component has no attributes.

D.55.3 Example

The following example shows how to use the max-size element in the component configuration file:

<stream>
    <name>monitoring-control-stream</name>
    <max-size>10000</max-size>
    <max-threads>1</max-threads>
</stream>

D.56 max-threads

Use this element to define the maximum number of threads that Oracle CEP server uses to process events for a channel or stream. The default value is 0..

When set to 0, the channel acts as a pass-through. When max-threads > 0, the channel acts as classic blocking queue, where upstream components are producers of events and the downstream components are the consumers of events. The queue size is defined by the configuration max-size. There will be up to max-threads number of threads consuming events from the queue.

You can change max-threads from 0 to a positive integer (that is, from a pass through to multiple threads) without redeploying. However, if you change max-threads from a positive integer to 0 (that is, from multiple threads to a pass through), then you must redeploy your application.

If the max-size attribute is 0, then setting a value for max-threads has no effect.

The default value for this attribute is 0.

Setting this value has no effect when max-size is 0.

D.56.1 Child Elements

The max-threads component configuration element has no child elements.

D.56.2 Attributes

The max-threads component has no attributes.

D.56.3 Example

The following example shows how to use the max-threads element in the component configuration file:

<channel>
    <name>monitoring-control-stream</name>
    <max-size>10000</max-size>
    <max-threads>1</max-threads>
</channel>

D.57 message-selector

Use this element to JMS message selector to use to filter messages in a jms-adapter.

The syntax of a message selector expression is based on a subset of the SQL92 conditional expression syntax and message headers and properties. For example, to select messages based on property EventType, you could use:

EventType = 'News' OR 'Commentary'

D.57.1 Child Elements

The message-selector component configuration element has no child elements.

D.57.2 Attributes

The message-selector component has no attributes.

D.57.3 Example

The following example shows how to use the message-selector element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <message-selector>EventType = 'News' OR 'Commentary'</message-selector>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.58 name

Use the name element in the following parent elements:

D.58.1 Child Elements

The name component configuration element has no child elements:

D.58.2 Attributes

The name component has no attributes.

D.58.3 Example

The following example shows how to use the name element in the component configuration file:

<diagnostics-profiles>
    <name>myDiagnosticProfiles</name>
    <profile>
        ...
    </profile>
</diagnostics-profiles>

In the example, the channel's unique identifier is myDiagnosticProfiles.

D.59 netio

Use this element to define a network input/output port for a component.

D.59.1 Child Elements

The netio component configuration element supports the following child elements:

D.59.2 Attributes

The netio component has no attributes.

D.59.3 Example

The following example shows how to use the netio element in the component configuration file:

<netio>
        <provider-name>providerCache</provider-name>
        <num-threads>1000</num-threads>
</netio>

D.60 num-threads

Use this element to define the number of threads in a network input/output port for a component.

D.60.1 Child Elements

The num-threads component configuration element has no child elements.

D.60.2 Attributes

The num-threads component has no attributes.

D.60.3 Example

The following example shows how to use the num-threads element in the component configuration file:

<netio>
        <provider-name>providerCache</provider-name>
        <num-threads>1000</num-threads>
</netio>

D.61 param

Use the param element to associate a message selector value with the parameter name specified in the message-selector element.

For more information, see Section D.11, "bindings (jms-adapter)".

D.61.1 Child Elements

The param component configuration element has no child elements.

D.61.2 Attributes

Table D-5 lists the attributes of the param component configuration element.

Table D-5 Attributes of the param Component Configuration Element

Attribute Description Data Type Required?

id

The parameter name specified in the message-selector.

String

Yes.


D.61.3 Example

The following example shows how to use the param element in the component configuration file:

<jms-adapter>
    <name>JMSInboundAdapter</name>
    <event-type>StockTick</event-type>
    <jndi-provider-url>t3://ppurich-pc:7001</jndi-provider-url>
    <destination-jndi-name>./Topic1</destination-jndi-name>
    <user>weblogic</user>
    <password>weblogic1</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>true</session-transacted>
    <message-selector>${CONDITION}</message-selector>
    <bindings>
        <group-binding group-id="ActiveActiveGroupBean_group1">
            <param id="CONDITION">acctid > 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group2">
            <param id="CONDITION">acctid BETWEEN 301 AND 400</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group3">
            <param id="CONDITION">acctid BETWEEN 201 AND 300</param>
        </group-binding>
        <group-binding group-id="ActiveActiveGroupBean_group4">
            <param id="CONDITION">acctid <= 200</param>
        </group-binding>
     </bindings>
</jms-adapter>

In this configuration, when the application is deployed to an Oracle CEP server with a cluster element groups child element that contains ActiveActiveGroupBean_group1, then the CONDITION parameter is defined as acctid > 400 and the application processes events whose acctid property is greater than 400.

D.62 parameter

Use this element to define a name/value parameter for a component.

D.62.1 Child Elements

The parameter component configuration element supports the following child elements:

D.62.2 Attributes

The parameter component has no attributes.

D.62.3 Example

The following example shows how to use the parameter element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
       <store-policy-parameters>
           <parameter>
               <name>timeout</name>
               <value>300</value>
           <parameter>
       </store-policy-parameters>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.63 params

Use this element to define the parameters for a binding element.

The value of this element is a comma separated list of simple type values. The order of the values must correspond with the order of the parameters in the EPL rule associated with this binding.

For more information, see:

D.63.1 Child Elements

The params component configuration element has no child elements.

D.63.2 Attributes

Table D-6 lists the attributes of the params component configuration element.

Table D-6 Attributes of the params Component Configuration Element

Attribute Description Data Type Required?

id

Unique identifier for this params element.

String

No.


D.63.3 Example

The following example shows how to use the params element in the component configuration file:

<processor>
    <name>processor1</name>
        <record-parameters>
            <dataset-name>test1data</dataset-name>
            <event-type-list>
                <event-type>SimpleEvent</event-type>
            </event-type-list>
            <provider-name>test-rdbms-provider</provider-name>
            <batch-size>1</batch-size>
            <batch-time-out>10</batch-time-out>
        </record-parameters>
        <rules>
            <rule id="rule1"><![CDATA[
                select stockSymbol, avg(price) as percentage
                from StockTick retain 5 events
                where stockSymbol=?
                having avg(price)  > ? or avg(price)  < ?
            ]]></rule>
        </rules>
        <bindings>
            <binding id="rule1">
                <params>BEAS,10.0,-10.0</params>
                <params id="IBM">IBM,5.0,5.0</params>
            </binding>
        </bindings>
</processor>

D.64 password

Use the password element in the following parent elements:

Use either encrypted-password or password but not both.

D.64.1 Child Elements

The password component configuration element has no child elements.

D.64.2 Attributes

The password component has no attributes.

D.64.3 Example

The following example shows how to use the password element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
</http-pub-sub-adapter>

D.65 playback-parameters

Use this element to define event playback parameters for a component.

For more information, see Chapter 13, "Configuring Event Record and Playback".

D.65.1 Child Elements

The playback-parameters component configuration element supports the following child elements:

D.65.2 Attributes

The playback-parameters component has no attributes.

D.65.3 Example

The following example shows how to use the playback-parameters element in the component configuration file:

<playback-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
</playback-parameters>

D.66 playback-speed

Use this element to define the playback speed as a positive float. The default value is 1, which corresponds to normal speed. A value of 2 means that events will be played back 2 times faster than the original record speed. Similarly, a value of 0.5 means that events will be played back at half the speed.

D.66.1 Child Elements

The playback-speed component configuration element has no child elements.

D.66.2 Attributes

The playback-speed component has no attributes.

D.66.3 Example

The following example shows how to use the duration element in the component configuration file:

<playback-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range-offset>
        <start>2010-01-20T05:00:00</start>
        <duration>03:00:00</duration>
    </time-range-offset>
    <playback-speed>100</playback-speed>
</playback-parameters>

D.67 processor (EPL)

Use this element to define an Oracle CQL or EPL processor component.

For more information, see Chapter 11, "Configuring EPL Processors".

For information on the processor element for Oracle CQL processors, see processor (Oracle CQL).

D.67.1 Child Elements

The processor component configuration element supports the following child elements:

D.67.2 Attributes

The processor component has no attributes.

D.67.3 Example

The following example shows how to use the processor element in the component configuration file:

<processor>
    <name>processor1</name>
        <record-parameters>
            <dataset-name>test1data</dataset-name>
            <event-type-list>
                <event-type>SimpleEvent</event-type>
            </event-type-list>
            <provider-name>test-rdbms-provider</provider-name>
            <batch-size>1</batch-size>
            <batch-time-out>10</batch-time-out>
        </record-parameters>
        <rules>
            <rule id="rule1"><![CDATA[
                select stockSymbol, avg(price) as percentage
                from StockTick retain 5 events
                where stockSymbol=?
                having avg(price)  > ? or avg(price)  < ?
            ]]></rule>
        </rules>
        <bindings>
            <binding id="rule1">
                <params>BEAS,10.0,-10.0</params>
                <params id="IBM">IBM,5.0,5.0</params>
            </binding>
        </bindings>
</processor>

In the example, the processor's unique identifier is processor1.

D.68 processor (Oracle CQL)

Use this element to define an Oracle CQL processor component.

For more information, see Chapter 10, "Configuring Oracle CQL Processors".

For information on the processor element for EPL processors, see processor (EPL).

D.68.1 Child Elements

The processor component configuration element supports the following child elements:

D.68.2 Attributes

The processor component has no attributes.

D.68.3 Example

The following example shows how to use the processor element in the component configuration file:

<processor>
    <name>cqlProcessor</name>
    <rules>
        <view id="lastEvents" schema="cusip bid srcId bidQty ask askQty seq"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from inputChannel[partition by srcId, cusip rows 1]
        ]]></view>
        <view id="bidask" schema="cusip bid ask"><![CDATA[ 
            select cusip, max(bid), min(ask) 
            from lastEvents
            group by cusip
        ]]></view>
            <view ...><![CDATA[
                ...
        ]]></view>
        ...
        <view id="MAXBIDMINASK" schema="cusip bidseq bidSrcId bid askseq askSrcId ask bidQty askQty"><![CDATA[ 
            select bid.cusip, bid.seq, bid.srcId as bidSrcId, bid.bid, ask.seq, 
                ask.srcId as askSrcId, ask.ask, bid.bidQty, ask.askQty 
            from BIDMAX as bid, ASKMIN as ask 
            where bid.cusip = ask.cusip
        ]]></view>
        <query id="BBAQuery"><![CDATA[ 
            ISTREAM(select bba.cusip, bba.bidseq, bba.bidSrcId, bba.bid, bba.askseq, 
                bba.askSrcId, bba.ask, bba.bidQty, bba.askQty, 
                "BBAStrategy" as intermediateStrategy, p.seq as correlationId, 1 as priority 
            from MAXBIDMINASK as bba, inputChannel[rows 1] as p where bba.cusip = p.cusip)
        ]]></query>
        <query id="MarketRule"><![CDATA[ 
             SELECT symbol, AVG(price) AS average, :1 AS market
             FROM StockTick [RANGE 5 SECONDS]
             WHERE symbol = :2
        ]]></query>
    </rules>
    <bindings>
        <binding id="MarketRule">
            <params id="nasORCL">NASDAQ, ORCL</params>
            <params id="nyJPM">NYSE, JPM</params>
            <params id="nyWFC">NYSE, WFC</params>
        </binding>
    </bindings>
</processor>

In the example, the processor's unique identifier is cqlProcessor.

D.69 profile

Use this element to define a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.69.1 Child Elements

The profile component configuration element supports the following child elements:

D.69.2 Attributes

The profile component has no attributes.

D.69.3 Example

The following example shows how to use the profile element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
        <average-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
            <threshhold>
                <amount>100</amount>
                <unit>MILLISECONDS</unit>
            </threshhold>
        </average-latency>
        <throughput>
            <throughput-interval>
                <amount>100000</amount>
                <unit>MICROSECONDS</unit>
            </throughput-interval>
            <average-interval>
                <amount>100000000</amount>
                <unit>NANOSECONDS</unit>
            </average-interval>
            <location>
                <application>diagnostic</application>
                <stage>AlertEventStream</stage>
                <direction>INBOUND</direction>
            </location>
        </throughput>
    </profile>
</diagnostic-profiles>

D.70 provider-name

Use the provider-name element in the following parent elements:

D.70.1 Child Elements

The provider-name component configuration element has no child elements.

D.70.2 Attributes

The provider-name component has no attributes.

D.70.3 Example

The following example shows how to use the provider-name element in the component configuration file:

<netio>
        <provider-name>providerCache</provider-name>
        <num-threads>1000</num-threads>
</netio>

D.71 query

Use this element to define an Oracle CQL query for a component.

For more information, see Chapter 10, "Configuring Oracle CQL Processors".

D.71.1 Child Elements

The query component configuration element has no child elements.

D.71.2 Attributes

Table D-7 lists the attributes of the query component configuration element.

Table D-7 Attributes of the query Component Configuration Element

Attribute Description Data Type Required?

id

Unique identifier for this query.

String

Yes.

active

Execute this query when the application is deployed and run.

Valid values are true and false. Default value is false.

Boolean

No.


D.71.3 Example

The following example shows how to use the query element in the component configuration file:

<processor>
    <name>cqlProcessor</name>
    <rules>
        <view id="lastEvents" schema="cusip bid srcId bidQty ask askQty seq"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from inputChannel[partition by srcId, cusip rows 1]
        ]]></view>
        <view id="bidask" schema="cusip bid ask"><![CDATA[ 
            select cusip, max(bid), min(ask) 
            from lastEvents
            group by cusip
        ]]></view>
            <view ...><![CDATA[
                ...
        ]]></view>
        ...
        <view id="MAXBIDMINASK" schema="cusip bidseq bidSrcId bid askseq askSrcId ask bidQty askQty"><![CDATA[ 
            select bid.cusip, bid.seq, bid.srcId as bidSrcId, bid.bid, ask.seq, 
                ask.srcId as askSrcId, ask.ask, bid.bidQty, ask.askQty 
            from BIDMAX as bid, ASKMIN as ask 
            where bid.cusip = ask.cusip
        ]]></view>
        <query id="BBAQuery"><![CDATA[ 
            ISTREAM(select bba.cusip, bba.bidseq, bba.bidSrcId, bba.bid, bba.askseq, 
                bba.askSrcId, bba.ask, bba.bidQty, bba.askQty, "BBAStrategy" as intermediateStrategy, 
                p.seq as correlationId, 1 as priority 
            from MAXBIDMINASK as bba, inputChannel[rows 1] as p where bba.cusip = p.cusip)
        ]]></query>
    </rules>
</processor>

D.72 record-parameters

Use this element to define event record parameters for a component.

For more information, see Chapter 13, "Configuring Event Record and Playback".

D.72.1 Child Elements

The record-parameters component configuration element supports the following child elements:

D.72.2 Attributes

The record-parameters component has no attributes.

D.72.3 Example

The following example shows how to use the record-parameters element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.73 repeat

Use this element to define whether or not to repeat playback-parameters.

Valid values are:

D.73.1 Child Elements

The repeat component configuration element has no child elements.

D.73.2 Attributes

The repeat component has no attributes.

D.73.3 Example

The following example shows how to use the duration element in the component configuration file:

<playback-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range-offset>
        <start>2010-01-20T05:00:00</start>
        <duration>03:00:00</duration>
    </time-range-offset>
    <repeat>true</repeat>
</playback-parameters>

D.74 rule

Use this element to define an EPL rule for a component.

This element is applicable only in a rules element.

D.74.1 Child Elements

The rule component configuration element has no child elements.

D.74.2 Attributes

Table D-8 lists the attributes of the rule component configuration element.

Table D-8 Attributes of the rule Component Configuration Element

Attribute Description Data Type Required?

id

Unique identifier for this rule.

String

Yes.

active

Execute this rule when the application is deployed and run.

Valid values are true and false. Default value is false.

Boolean

No.


D.74.3 Example

The following example shows how to use the rule element in the component configuration file:

<processor>
    <name>rvSampleProcessor</name>
    <rules>
        <rule id="rvSampleRule1"><![CDATA[ 
            select * from RVSampleEvent retain 1 event
        ]]></rule>
    </rules>
</processor>

D.75 rules

Use this element to define one or more Oracle CQL queries or views for a processor (Oracle CQL) or EPL rules for a processor (EPL).

D.75.1 Child Elements

The rules component configuration element supports the following child elements:

D.75.2 Attributes

The rules component has no attributes.

D.75.3 Example

The following example shows how to use the rules element in the component configuration file:

<processor>
    <name>cqlProcessor</name>
    <rules>
        <view id="lastEvents" schema="cusip bid srcId bidQty ask askQty seq"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from inputChannel[partition by srcId, cusip rows 1]
        ]]></view>
        <view id="bidask" schema="cusip bid ask"><![CDATA[ 
            select cusip, max(bid), min(ask) 
            from lastEvents
            group by cusip
        ]]></view>
            <view ...><![CDATA[
                ...
        ]]></view>
        ...
        <view id="MAXBIDMINASK" schema="cusip bidseq bidSrcId bid askseq askSrcId ask bidQty askQty"><![CDATA[ 
            select bid.cusip, bid.seq, bid.srcId as bidSrcId, bid.bid, ask.seq, 
                ask.srcId as askSrcId, ask.ask, bid.bidQty, ask.askQty 
            from BIDMAX as bid, ASKMIN as ask 
            where bid.cusip = ask.cusip
        ]]></view>
        <query id="BBAQuery"><![CDATA[ 
            ISTREAM(select bba.cusip, bba.bidseq, bba.bidSrcId, bba.bid, bba.askseq, 
                bba.askSrcId, bba.ask, bba.bidQty, bba.askQty, 
                "BBAStrategy" as intermediateStrategy, p.seq as correlationId, 1 as priority 
            from MAXBIDMINASK as bba, inputChannel[rows 1] as p where bba.cusip = p.cusip)
        ]]></query>
    </rules>
</processor>

D.76 schedule-time-range

Use this element to define the time during which events will be played back to the stage. Playing back will start at the specified start time and will continue until all the events are played back or specified end time. If repeat is set to true, playback will continue until the specified end time or until playback is explicitly stopped by the user.

This element is applicable only to the playback-parameters element.

D.76.1 Child Elements

The schedule-time-range component configuration element supports the following child elements:

D.76.2 Attributes

The schedule-time-range component has no attributes.

D.76.3 Example

The following example shows how to use the schedule-time-range element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <schedule-time-range>
        <start>2010-01-20T05:00:00</start>
        <end>2010-01-20T18:00:00</end>
    </schedule-time-range>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.77 schedule-time-range-offset

Use this element to define the time during which events will be played back to the stage. Playing back will start at the specified start time and will continue until all the events are played back or specified end time. If repeat is set to true, playback will continue until the specified end time or until playback is explicitly stopped by the user.

This element is applicable only to the playback-parameters element.

D.77.1 Child Elements

The schedule-time-range-offset component configuration element supports the following child elements:

D.77.2 Attributes

The schedule-time-range-offset component has no attributes.

D.77.3 Example

The following example shows how to use the schedule-time-range-offset element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <schedule-time-range-offset>
        <start>2010-01-20T05:00:00</start>
        <duration>03:00:00</duration>
    </schedule-time-range-offset>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.78 selector

Use this element to specify which up-stream Oracle CQL processor queries are permitted to output their results to a downstream channel.

Figure D-1 shows an EPN with channel filteredStream connected to up-stream Oracle CQL processor filteredFanoutProcessor.

Figure D-1 EPN With Oracle CQL Processor and Down-Stream Channel

Description of Figure D-1 follows
Description of "Figure D-1 EPN With Oracle CQL Processor and Down-Stream Channel"

Example D-12 shows the queries configured for the Oracle CQL processor.

Example D-12 filterFanoutProcessor Oracle CQL Queries

<processor>
    <name>filterFanoutProcessor</name>
    <rules>
        <query id="Yr3Sector"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from priceStream where sector="3_YEAR"
        ]]></query>
        <query id="Yr2Sector"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from priceStream where sector="2_YEAR"
        ]]></query>
        <query id="Yr1Sector"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from priceStream where sector="1_YEAR"
        ]]></query>
    </rules>
</processor>

If you specify more than one query for an Oracle CQL processor as Example D-12 shows, then, by default, all query results are output to the processor's out-bound channel (filteredStream in Figure D-1). Optionally, in the component configuration source, you can use the channel element selector child element to specify a space-delimited list of one or more Oracle CQL query names that may output their results to the channel as Example D-13 shows. In this example, query results for query Yr3Sector and Yr2Sector are output to filteredStream but not query results for query Yr1Sector.

Example D-13 Using selector to Control Which Query Results are Output

<channel>
    <name>filteredStream</name>
    <selector>Yr3Sector Yr2Sector</selector>
</channel>

You may configure a channel element with a selector before creating the queries in the upstream processor. In this case, you must specify query names that match the names in the selector.

Note:

The selector attribute is only applicable if the up-stream node is an Oracle CQL processor. For more information, see Chapter 10, "Configuring Oracle CQL Processors".

D.78.1 Child Elements

The selector component configuration element has no child elements.

D.78.2 Attributes

The selector component has no attributes.

D.78.3 Example

The following example shows how to use the selector element in the component configuration file:

<processor>
    <name>PatternProcessor</name>
    <rules>
        <query id="match"><![CDATA[ 
            select T.firstW as firstw, T.lastZ as lastz, T.price as price
            from StockInputsStream 
            MATCH_RECOGNIZE ( 
                MEASURES A.c1 as firstW, last(Z.c1) as lastZ, A.c2 as price 
                PATTERN(A W+ X+ Y+ Z+) 
                DEFINE  A as A.c1 = A.c1, 
                        W as W.c2 < prev(W.c2), 
                        X as X.c2 > prev(X.c2), 
                        Y as Y.c2 < prev(Y.c2), 
                        Z as Z.c2 > prev(Z.c2)) 
            as T
        ]]></query>
         <query id="stock"><![CDATA[ 
            select c1 as ts, c2 as price from StockInputsStream
        ]]></query>
    </rules>
</processor>
<channel>
    <name>StockOutputChannel</name>
    <selector>stock</selector>
</channel>
<channel>
    <name>MatchOutputChannel</name>
    <selector>match</selector>
</channel>

D.79 server-context-path

Required. For each local http-pub-sub-adapter for publishing, specify the value of the Oracle CEP server config.xml file element http-pubsub child element path of the local HTTP pub-sub server associated with the Oracle CEP instance hosting the current Oracle CEP application.

Default: /pubsub.

If you have created a new local HTTP pub-sub server, or changed the default configuration, then specify the appropriate path child element value.

Note:

Do not specify this option for a remote HTTP pub-sub adapter.

D.79.1 Child Elements

The server-context-path component configuration element has no child elements.

D.79.2 Attributes

The server-context-path component has no attributes.

D.79.3 Example

The following example shows how to use the server-context-path element in the component configuration file:

<http-pub-sub-adapter>
    <name>localPub</name>
    <server-context-path>/pubsub</server-context-path>
    <channel>/test1</channel>
</http-pub-sub-adapter>

D.80 server-url

Required. For each remote http-pub-sub-adapter for publishing or subscribing, specify the URL of the remote HTTP pub-sub server to which the Oracle CEP application will publish. The remote HTTP pub-sub server could be another instance of Oracle CEP, or a WebLogic Server instance, or it could be any third-party HTTP pub-sub server. For example:

http://myhost.com:9102/pubsub

Note:

Do not specify this option for a local HTTP pub-sub adapter.

D.80.1 Child Elements

The server-url component configuration element has no child elements.

D.80.2 Attributes

The server-url component has no attributes.

D.80.3 Example

The following example shows how to use the server-url element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://myhost.com:9102/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
</http-pub-sub-adapter>

In the example, the URL of the remote HTTP pub-sub server to which the remotePublisher adapter will publish events is http://myhost.com:9102/pubsub.

D.81 session-ack-mode-name

Use this element to define the session acknowledge mode name for a jms-adapter.

Valid values from javax.jms.Session are:

Default: AUTO_ACKNOWLEDGE.

D.81.1 Child Elements

The session-ack-mode-name component configuration element has no child elements.

D.81.2 Attributes

The session-ack-mode-name component has no attributes.

D.81.3 Example

The following example shows how to use the session-ack-mode-name element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <session-ack-mode-name>AUTO_ACKNOWLEDGE</session-ack-mode-name>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.82 session-transacted

Use this element to define whether or not a session is transacted for both an inbound or outbound jms-adapter.

Valid values are:

D.82.1 Child Elements

The session-transacted component configuration element has no child elements.

D.82.2 Attributes

The session-transacted component has no attributes.

D.82.3 Example

The following example shows how to use the session-transacted element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <connection-jndi-name>weblogic.jms.ConnectionFactory</connection-jndi-name>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <session-ack-mode-name>AUTO_ACKNOWLEDGE</session-ack-mode-name>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.83 stage

Use this element to define the stage for a start-location or end-location element of a diagnostic profile.

Valid values are the name of an existing stage in your Event Processing Network (EPN). For more information, see Section 1.1.1, "Components of the Oracle CEP Event Processing Network".

D.83.1 Child Elements

The stage component configuration has no child elements:

D.83.2 Attributes

The stage component has no attributes.

D.83.3 Example

The following example shows how to use the stage element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.84 start

Use this element to define a start time for a time-range, time-range-offset, or schedule-time-range-offset element.

Express the start time as an XML Schema dateTime value of the form:

yyyy-mm-ddThh:mm:ss

For example, to specify that play back should start on January 20, 2010, at 5:00am and end on January 20, 2010, at 6:00 pm, enter the following:

<time-range>
    <start>2010-01-20T05:00:00</start>
    <end>2010-01-20T18:00:00</end>
  </time-range>

For complete details of the XML Schema dateTime format, see http://www.w3.org/TR/xmlschema-2/#dateTime-lexical-representation.

D.84.1 Child Elements

The start component configuration element has no child elements.

D.84.2 Attributes

The start component has no attributes.

D.84.3 Example

The following example shows how to use the start element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range>
        <start>2010-01-20T05:00:00</start>
        <end>2010-01-20T18:00:00</end>
    </time-range>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.85 start-location

Use this element to define the start location of a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.85.1 Child Elements

The start-location component configuration element supports the following child elements:

D.85.2 Attributes

The start-location component has no attributes.

D.85.3 Example

The following example shows how to use the start-location element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.86 start-stage

Use this element to define the starting stage of a diagnostic profile.

Valid values are the name of an existing stage in your Event Processing Network (EPN). For more information, see Section 1.1.1, "Components of the Oracle CEP Event Processing Network".

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.86.1 Child Elements

The start-stage component configuration element has no child elements.

D.86.2 Attributes

The start-stage component has no attributes.

D.86.3 Example

The following example shows how to use the start-stage element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.87 store-policy-parameters

Use this element to define one or more store policy parameter, specific to the event store provider.

D.87.1 Child Elements

The store-policy-parameter component configuration element supports the following child elements:

D.87.2 Attributes

The store-policy-parameter component has no attributes.

D.87.3 Example

The following example shows how to use the store-policy-parameter element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
       <store-policy-parameters>
           <parameter>
               <name>timeout</name>
               <value>300</value>
           <parameter>
       </store-policy-parameters>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.88 stream

Use this element to define a stream component.

Note:

The stream component is deprecated in 11g Release 1 (11.1.1). Use the channel element instead.

D.88.1 Child Elements

The stream component configuration element supports the following child elements:

D.88.2 Attributes

The stream component has no attributes.

D.88.3 Example

The following example shows how to use the stream element in the component configuration file:

<stream>
    <name>fxMarketEuroOut</name>
    <max-size>0</max-size>
    <max-threads>0</max-threads>
</stream>

In the example, the stream's unique identifier is fxMarketEuroOut.

D.89 symbol

Use this element to define a symbol for an adapter, http-pub-sub-adapter, or jms-adapter element.

Note:

The symbol component is deprecated in 11g Release 1 (11.1.1).

D.89.1 Child Elements

The symbol component configuration has no child elements:

D.89.2 Attributes

The symbol component has no attributes.

D.89.3 Example

The following example shows how to use the symbol element in the component configuration file:

<adapter>
    <name>trackdata</name>
    <symbols>
        <symbol>BEAS</symbol>
        <symbol>IBM</symbol>
    </symbols>
</adapter>

D.90 symbols

Use this element to define one or more symbol elements for a component.

Note:

The symbol component is deprecated in 11g Release 1 (11.1.1).

D.90.1 Child Elements

The symbols component configuration element supports the following child elements:

D.90.2 Attributes

The symbols component has no attributes.

D.90.3 Example

The following example shows how to use the symbols element in the component configuration file:

<adapter>
    <name>trackdata</name>
    <symbols>
        <symbol>BEAS</symbol>
        <symbol>IBM</symbol>
    </symbols>
</adapter>

D.91 threshhold

Use this element to define the threshold above which Oracle CEP server logs a monitoring event.

This element is applicable only in an average-latency element in a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.91.1 Child Elements

The threshhold component configuration element supports the following child elements:

D.91.2 Attributes

The threshhold component has no attributes.

D.91.3 Example

The following example shows how to use the threshhold element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <average-latency>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
            <threshhold>
                <amount>100</amount>
                <unit>MILLISECONDS</unit>
            </threshhold>
        </average-latency>
    </profile>
</diagnostic-profiles>

D.92 throughput

Use this element to define a throughput diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.92.1 Child Elements

The throughput component configuration element supports the following child elements:

D.92.2 Attributes

The throughput component has no attributes.

D.92.3 Example

The following example shows how to use the throughput element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <throughput>
            <throughput-interval>
                <amount>100000</amount>
                <unit>MICROSECONDS</unit>
            </throughput-interval>
            <average-interval>
                <amount>100000000</amount>
                <unit>NANOSECONDS</unit>
            </average-interval>
            <location>
                <application>diagnostic</application>
                <stage>AlertEventStream</stage>
                <direction>INBOUND</direction>
            </location>
        </throughput>
    </profile>
</diagnostic-profiles>

D.93 throughput-interval

Use this element to define the throughput interval of a diagnostic profile.

For more information, see "Monitoring the Throughput and Latency of a Stage or Path in the EPN" in the Oracle Complex Event Processing Visualizer User's Guide.

D.93.1 Child Elements

The throughput-interval component configuration element supports the following child elements:

D.93.2 Attributes

The throughput-interval component has no attributes.

D.93.3 Example

The following example shows how to use the throughput-interval element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <throughput>
            <throughput-interval>
                <amount>100000</amount>
                <unit>MICROSECONDS</unit>
            </throughput-interval>
            <average-interval>
                <amount>100000000</amount>
                <unit>NANOSECONDS</unit>
            </average-interval>
            <location>
                <application>diagnostic</application>
                <stage>AlertEventStream</stage>
                <direction>INBOUND</direction>
            </location>
        </throughput>
    </profile>
</diagnostic-profiles>

D.94 time-range

Use this element to define a filter that Oracle CEP server applies to the events in the event store. Only events with a record-time in this time range will be played back to the stage.

Use either time-range-offset or time-range but not both.

For more information, see Chapter 13, "Configuring Event Record and Playback".

D.94.1 Child Elements

The time-range component configuration element supports the following child elements:

D.94.2 Attributes

The time-range component has no attributes.

D.94.3 Example

The following example shows how to use the time-range element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range>
        <start>2010-01-20T05:00:00</start>
        <end>2010-01-20T18:00:00</end>
    </time-range>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.95 time-range-offset

Use this element to define a filter that Oracle CEP server applies to the events in the event store. Only events with a record-time in this time range will be played back to the stage.

Use either time-range or time-range-offset but not both.

For more information, see Chapter 13, "Configuring Event Record and Playback".

D.95.1 Child Elements

The time-range-offset component configuration element supports the following child elements:

D.95.2 Attributes

The time-range-offset component has no attributes.

D.95.3 Example

The following example shows how to use the time-range-offset element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
    <event-type-list>
        <event-type>TupleEvent1</event-type>
    </event-type-list>
    <provider-name>test-rdbms-provider</provider-name>
    <store-policy-parameters>
        <parameter>
            <name>timeout</name>
            <value>300</value>
        <parameter>
    </store-policy-parameters>
    <time-range-offset>
        <start>2010-01-20T05:00:00</start>
        <duration>03:00:00</duration>
    </time-range-offset>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.96 time-to-live

Use this element to define the maximum amount of time, in milliseconds, that an entry is cached. Default value is infinite.

For more information, see Section 12.2, "Configuring an Oracle CEP Local Caching System and Cache".

D.96.1 Child Elements

The time-to-live component configuration element has no child elements.

D.96.2 Attributes

The time-to-live component has no attributes.

D.96.3 Example

The following example shows how to use the time-to-live element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.97 unit

Use this element to define the duration units of amount element.

Valid values are:

D.97.1 Child Elements

The unit component configuration has no child elements:

D.97.2 Attributes

The unit component has no attributes.

D.97.3 Example

The following example shows how to use the unit element in the component configuration file:

<diagnostic-profiles>
    <name>myselfprofiles</name>
    <profile>
        <name>testProfile0</name>
        <enabled>true</enabled>
        <start-stage>MetricSubscriber</start-stage>
        <max-latency>
            <collect-interval>
                <amount>1000</amount>
                <unit>s</unit>
            </collect-interval>
            <name>testProfile0MaxLat</name>
            <start-location>
                <application>diagnostic</application>
                <stage>MetricSubscriber</stage>
                <direction>INBOUND</direction>
            </start-location>
            <end-location>
                <application>diagnostic</application>
                <stage>MonitorProcessor</stage>
                <direction>OUTBOUND</direction>
            </end-location>
        </max-latency>
    </profile>
</diagnostic-profiles>

D.98 user

Use the user element in the following parent elements:

D.98.1 Child Elements

The user component configuration element has no child elements.

D.98.2 Attributes

The user component has no attributes.

D.98.3 Example

The following example shows how to use the user element in the component configuration file:

<http-pub-sub-adapter>
    <name>remotePub</name>
    <server-url>http://localhost:9002/pubsub</server-url>
    <channel>/test1</channel>
    <event-type>com.bea.wlevs.tests.httppubsub.PubsubTestEvent</event-type>
    <user>wlevs</user>
    <password>wlevs</password>
</http-pub-sub-adapter>

D.99 value

Use this element to define the value of a parameter element.

D.99.1 Child Elements

The value component configuration element has no child elements.

D.99.2 Attributes

The value component has no attributes.

D.99.3 Example

The following example shows how to use the value element in the component configuration file:

<record-parameters>
    <dataset-name>tuple1</dataset-name>
        <event-type-list>
            <event-type>TupleEvent1</event-type>
        </event-type-list>
        <provider-name>test-rdbms-provider</provider-name>
       <store-policy-parameters>
           <parameter>
               <name>timeout</name>
               <value>300</value>
           <parameter>
       </store-policy-parameters>
    <batch-size>1</batch-size>
    <batch-time-out>10</batch-time-out>
</record-parameters>

D.100 view

Use this element to define an Oracle CQL view for a component.

For more information, see Chapter 10, "Configuring Oracle CQL Processors".

D.100.1 Child Elements

The view component configuration element has no child elements.

D.100.2 Attributes

Table D-9 lists the attributes of the view component configuration element.

Table D-9 Attributes of the view Component Configuration Element

Attribute Description Data Type Required?

id

Unique identifier for this query.

String

Yes.

active

Execute this query when the application is deployed and run.

Valid values are true and false. Default value is false.

Boolean

No.

schema

Space delimited list of stream elements used in the view.

String of space delimited tokens.

No.


D.100.3 Example

The following example shows how to use the view element in the component configuration file:

<processor>
    <name>cqlProcessor</name>
    <rules>
        <view id="lastEvents" schema="cusip bid srcId bidQty ask askQty seq"><![CDATA[ 
            select cusip, bid, srcId, bidQty, ask, askQty, seq 
            from inputChannel[partition by srcId, cusip rows 1]
        ]]></view>
        <view id="bidask" schema="cusip bid ask"><![CDATA[ 
            select cusip, max(bid), min(ask) 
            from lastEvents
            group by cusip
        ]]></view>
            <view ...><![CDATA[
                ...
        ]]></view>
        ...
        <view id="MAXBIDMINASK" schema="cusip bidseq bidSrcId bid askseq askSrcId ask bidQty askQty"><![CDATA[ 
            select bid.cusip, bid.seq, bid.srcId as bidSrcId, bid.bid, ask.seq, 
                ask.srcId as askSrcId, ask.ask, bid.bidQty, ask.askQty 
            from BIDMAX as bid, ASKMIN as ask 
            where bid.cusip = ask.cusip
        ]]></view>
        <query id="BBAQuery"><![CDATA[ 
            ISTREAM(select bba.cusip, bba.bidseq, bba.bidSrcId, bba.bid, bba.askseq, 
                bba.askSrcId, bba.ask, bba.bidQty, bba.askQty, 
                "BBAStrategy" as intermediateStrategy, p.seq as correlationId, 1 as priority 
            from MAXBIDMINASK as bba, inputChannel[rows 1] as p where bba.cusip = p.cusip)
        ]]></query>
    </rules>
</processor>

D.101 work-manager

Use this element to define the name of a work manager for a jms-adapter.

Valid value is the name specified in the Oracle CEP server config.xml file work-manager element name child element.The default value is the work manager configured for the application itself.

For more information, see Section F.44, "work-manager".

D.101.1 Child Elements

The work-manager component configuration element has no child elements:

D.101.2 Attributes

The work-manager component has no attributes.

D.101.3 Example

The following example shows how to use the work-manager element in the component configuration file:

<jms-adapter>
    <name>jmsInbound-text</name>
    <jndi-provider-url>t3://localhost:7001</jndi-provider-url>
    <destination-name>JMSServer-0/Module1!Queue1</destination-name>
    <user>weblogic</user>
    <password>weblogic</password>
    <work-manager>JettyWorkManager</work-manager>
    <concurrent-consumers>1</concurrent-consumers>
    <session-transacted>false</session-transacted>
</jms-adapter>

D.102 work-manager-name

Use this element to define a work manager for a cache.

The listeners element has a single child element, work-manager-name, that specifies the work manager to be used for asynchronously invoking listeners. This value is ignored if synchronous invocations are enabled. If a work manager is specified for the cache itself, this value overrides it for invoking listeners only.

Valid value is the name specified in the Oracle CEP server config.xml file work-manager element name child element.The default value is the work manager configured for the application itself.

D.102.1 Child Elements

The work-manager-name component configuration element has no child elements:

D.102.2 Attributes

The work-manager-name component has no attributes.

D.102.3 Example

The following example shows how to use the work-manager-name element in the component configuration file:

<cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
</cache>

D.103 write-behind

Use this element to specify asynchronous writes to the cache store. The cache store is invoked from a separate thread after a create or update of a cache entry. This element may be changed dynamically.

D.103.1 Child Elements

The write-behind component configuration element supports the following child elements:

D.103.2 Attributes

The write-behind component has no attributes.

D.103.3 Example

The following example shows how to use the write-behind element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-behind>
            <work-manager-name>JettyWorkManager</work-manager-name>
            <batch-size>100</batch-size>
            <buffer-size>100</buffer-size>
            <buffer-write-attempts>100</buffer-write-attempts>
            <buffer-write-timeout>100</buffer-write-timeout>
        </write-behind>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.104 write-none

Use this element to specify no writes to a cache store. This is the default write policy. This element may be changed dynamically.

D.104.1 Child Elements

The write-none component configuration element has no child elements.

D.104.2 Attributes

The write-none component has no attributes.

D.104.3 Example

The following example shows how to use the write-none element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-none/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>

D.105 write-through

Use this element to specify synchronous writes to the cache store. As soon as an entry is created or updated the write occurs. This element may be changed dynamically.

D.105.1 Child Elements

The write-through component configuration element has no child elements.

D.105.2 Attributes

The write-through component has no attributes.

D.105.3 Example

The following example shows how to use the write-through element in the component configuration file:

<caching-system>
    <name>providerCachingSystem</name>
    <cache>
        <name>providerCache</name>
        <max-size>1000</max-size>
        <eviction-policy>FIFO</eviction-policy>
        <time-to-live>60000</time-to-live>
        <idle-time>120000</idle-time>
        <write-through/>
        <work-manager-name>JettyWorkManager</work-manager-name>
        <listeners asynchronous="false">
            <work-manager-name>JettyWorkManager</work-manager-name>
        </listeners>
    </cache>
</caching-system>