Skip Headers
Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Enterprise Content Management Suite
11g Release 1 (11.1.1)

Part Number E15483-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

11 Integration with Oracle Identity Management

This chapter describes how to integrate Oracle Enterprise Content Management Suite with Oracle Identity Management. It contains the following sections:

11.1 Credential and Policy Store Configuration

The following topics describe credential and policy store configuration in detail:

11.1.1 Overview of Credential and Policy Store Configuration

Oracle Fusion Middleware allows using different types of credential and policy stores in a WebLogic domain. Domains can use stores based on an XML file or on different types of LDAP providers. When a domain uses an LDAP store, all policy and credential data is kept and maintained in a centralized store. However, when using XML policy stores, the changes made on managed servers are not propagated to the Administration Server unless they use the same domain home. The enterprise deployment topology for Oracle Enterprise Content Management Suite uses different domain homes for the Administration Server and the managed servers, which means that Oracle requires the use of an LDAP store as policy and credential store for integrity and consistency. By default, Oracle WebLogic Server domains use an XML file for the policy store. The following sections describe the steps required to change the default store to Oracle Internet Directory LDAP for credentials or policies.

Note:

The backend repository for the policy store and the credential store must use the same kind of LDAP server. To preserve this coherence, note that reassociating one store implies reassociating the other one, that is, the reassociation of both the credential and the policy stores is accomplished as a unit using the Fusion Middleware Control or the WLST command reassociateSecurityStore. For more information, see Section 11.1.4, "Reassociation of Credentials and Policies."

11.1.2 Credential Store Configuration

A credential store is a repository of security data (credentials). A credential can hold user name and password combinations, tickets, or public key certificates. Credentials are used during authentication, when principals are populated in subjects, and, further, during authorization, when determining what actions the subject can perform. This section provides steps to configure Oracle Internet Directory LDAP as a credential store for the Oracle Enterprise Content Management Suite enterprise deployment topology. For more details on credential store configuration, refer to the "Configuring the Credential Store" chapter in the Oracle Fusion Middleware Security Guide.

The following section describe credential store configuration:

11.1.2.1 Creating the LDAP Authenticator

To be safe, before you create the LDAP authenticator, you should first back up the relevant configuration files:

ORACLE_BASE/admin/domain_name/aserver/domain_name/config/config.xml
ORACLE_BASE/admin/domain_name/aserver/domain_name/config/fmwconfig/jps-config.xml
ORACLE_BASE/admin/domain_name/aserver/domain_name/config/fmwconfig/system-jazn-data.xml

Also back up the boot properties file for the Administration Server:

ORACLE_BASE/admin/domain_name/aserver/domain_name/servers/AdminServer/security/boot.properties

Follow these steps to set the proper authenticator:

  1. Log in to the WebLogic Server Console.

  2. Click the Security Realms link on the left navigational bar.

  3. Click the myrealm default realm entry to configure it.

  4. Open the Providers tab within the realm.

  5. Observe that there is a DefaultAuthenticator provider configured for the realm.

  6. Click Lock & Edit.

  7. Click the New button to add a new provider.

  8. Enter a name for the provider such as OIDAuthenticator or OVDAuthenticator depending on whether Oracle Internet Directory or Oracle Virtual Directory will be used.

  9. Select the OracleInternetDirectoryAuthenticator or OracleVirtualDirectoryAuthenticator type from the list of authenticators depending on whether Oracle Internet Directory or Oracle Virtual Directory will be used.

  10. Click OK.

  11. In the Providers screen, click the newly created Authenticator.

  12. Set the control flag to SUFFICIENT. This indicates that if a user can be authenticated successfully by this authenticator, then it should accept that authentication and should not continue to invoke any additional authenticators. If the authentication fails, it will fall through to the next authenticator in the chain. Make sure all subsequent authenticators also have their control flag set to SUFFICIENT; in particular, check the DefaultAuthenticator and set that to SUFFICIENT.

  13. Click Save to save this setting.

  14. Open the Provider Specific tab to enter the details for the LDAP server.

  15. Enter the details specific to your LDAP server, as shown in the following table:

    Parameter Value Value Description
    Host For example: oid.mycompany.com The LDAP server's server ID.
    Port For example: 636 The LDAP server's port number.
    Principal For example: cn=orcladmin The LDAP user DN used to connect to the LDAP server.
    Credential NA The password used to connect to the LDAP server.
    SSL Enabled Checked Specifies whether SSL protocol is used when connecting to LDAP server.
    User Base DN For example: cn=users,dc=us,dc=mycompany,dc=com Specify the DN under which your Users start.
    Group Base DN For example: cn=groups,dc=us,dc=mycompany,dc=com Specify the DN that points to your Groups node.
    Use Retrieved User Name as Principal Checked Must be turned on.

    Click Save when done.

  16. Click Activate Changes to propagate the changes.

11.1.2.1.1 Setting the Order of Providers

Reorder the OID/OVD Authenticator and Default Authenticator and ensure that the control flag for each authenticator is set in the following order:

  • OID LDAP Authenticator: SUFFICIENT

  • Default Authenticator: SUFFICIENT

11.1.2.2 Moving the WebLogic Administrator to LDAP

This section provides details for provisioning a new administrator user and group for managing Oracle Enterprise Content Management Suite's WebLogic domain in the enterprise deployment topology. This section describes the following tasks:

11.1.2.2.1 Provisioning Admin Users and Groups in an LDAP Directory

As mentioned in the introduction to this section, users and groups from multiple WebLogic domains may be provisioned in a central LDAP user store. In such a case, there is a possibility that one WebLogic admin user may have access to all the domains within an enterprise. This is not a desirable situation. To avoid this, the users and groups provisioned must have a unique distinguished name within the directory tree. In this guide, the admin user and group for the ECM EDG WebLogic domain will be provisioned with the DNs below:

  • Admin User DN:

    cn=weblogic_ecm,cn=Users,dc=us,dc=mycompany,dc=com
    
  • Admin Group DN:

    cn=ECM Administrators,cn=Groups,dc=us,dc=mycompany,dc=com
    

Follow these steps to provision the admin user and admin group in Oracle Internet Directory:

  1. Create an ldif file named admin_user.ldif with the contents shown below depending on the OAM version used, and then save the file:

    • OAM 10g:

      dn: cn=weblogic_ecm, cn=Users, dc=us, dc=mycompany, dc=com
      orclsamaccountname: weblogic_ecm
      givenname: weblogic_ecm
      sn: weblogic_ecm
      userpassword: Welcome1
      obver: 10.1.4.0
      mail: weblogic_ecm
      objectclass: top
      objectclass: person
      objectclass: organizationalPerson
      objectclass: inetorgperson
      objectclass: orcluser
      objectclass: orcluserV2
      objectclass: oblixorgperson
      uid: weblogic_ecm
      cn: weblogic_ecm
      description: Admin User for the ECM Domain
      
    • OAM 11g:

      dn: cn=weblogic_ecm, cn=Users, dc=us, dc=mycompany, dc=com
      orclsamaccountname: weblogic_ecm
      givenname: weblogic_ecm
      sn: weblogic_ecm
      userpassword: Welcome1
      obver: 10.1.4.0
      mail: weblogic_ecm
      objectclass: top
      objectclass: person
      objectclass: organizationalPerson
      objectclass: inetorgperson
      objectclass: orcluser
      objectclass: orcluserV2
      uid: weblogic_ecm
      cn: weblogic_ecm
      description: Admin User for the ECM Domain
      
  2. Run the ldapadd command located under the ORACLE_HOME/bin directory to provision the user in Oracle Internet Directory.

    Note:

    The ORACLE_HOME used here is the ORACLE_HOME for the Identity Management installation where Oracle Internet Directory resides.

    For example (the command is shown as two lines in the example below for readability purposes, but you should enter the command on a single line):

    OIDHOST1> ORACLE_HOME/bin/ldapadd -h oid.mycompany.com -p 389 -D
    cn="orcladmin" -w welcome1 -c -v -f admin_user.ldif
    
  3. Create an ldif file named admin_group.ldif with the contents shown below and then save the file:

    dn: cn=ECM Administrators, cn=Groups, dc=us, dc=mycompany, dc=com
    displayname: ECM Administrators
    objectclass: top
    objectclass: groupOfUniqueNames
    objectclass: orclGroup
    uniquemember: cn=weblogic_ecm, cn=users, dc=us, dc=mycompany, dc=com
    cn: ECM Administrators
    description: Administrators Group for the ECM Domain
    
  4. Run the ldapadd command located under the ORACLE_HOME/bin directory to provision the group in Oracle Internet Directory (the command is shown as two lines in the example below for readability purposes, but you should enter the command on a single line):

    OIDHOST1> ORACLE_HOME/bin/ldapadd -h oid.mycompany.com -p 389 -D
    cn="orcladmin" -w welcome1 -c -v -f admin_group.ldif
    
11.1.2.2.2 Assigning the Admin Role to the Admin Group

After adding the users and groups to Oracle Internet Directory, the group must be assigned the Admin role within the WebLogic domain security realm. This enables all users that belong to the group to be administrators for that domain. Follow these steps to assign the Admin role to the Admin group:

  1. Log in to the WebLogic Administration Server Console.

  2. In the left pane of the console, click Security Realms.

  3. On the Summary of Security Realms page, click myrealm under the Realms table.

  4. On the Settings page for myrealm, click the Roles & Policies tab.

  5. On the Realm Roles page, expand the Global Roles entry under the Roles table. This brings up the entry for Roles. Click on the Roles link to bring up the Global Roles page.

  6. On the Global Roles page, click the Admin role to bring up the Edit Global Role page:

    1. On the Edit Global Roles page, under the Role Conditions table, click the Add Conditions button.

    2. On the Choose a Predicate page, select Group from the drop down list for predicates and click Next.

    3. On the Edit Arguments Page, specify ECM Administrators in the Group Argument field and click Add.

  7. Click Finish to return to the Edit Global Rule page.

  8. The Role Conditions table now shows the ECM Administrators Group as an entry.

  9. Click Save to finish adding the Admin Role to the ECM Administrators Group.

  10. Validate that the changes were successful by bringing up the WebLogic Administration Server Console using a web browser. Log in using the credentials for the weblogic_ecm user.

Note:

Each Oracle application in the Oracle ECM enterprise deployment topology may have its own predefined roles and groups defined for administration and monitoring purposes. By default, the "Administrators" group will allow these operations. However, this group may be too broad. For example, it may be undesirable that SOA administrators are also administrators for the Oracle WebLogic Server domain where Oracle SOA, I/PM and UCM are running. This is why it may be desirable, as suggested in this section, to create a more specific group such as "ECM Administrators." In order for the various applications to allow the ECM Administrators group to administer the different systems, you need to add the required roles to that group. For example, for SOA Worklistapp's administration, add the SOAAdmin role. Refer to each component's specific roles for the required roles in each case.
11.1.2.2.3 Updating the boot.properties File and Restarting the System

The boot.properties file for the Administration Server should be updated with the WebLogic admin user created in Oracle Internet Directory. Follow the steps below to update the boot.properties file:

  1. On SOAHOST1, go the following directory:

    SOAHOST1>cd ORACLE_BASE/admin/domain_name/aserver/domain_name/servers/AdminServer/security
    
  2. Rename the existing boot.properties file:

    SOAHOST1> mv boot.properties boot.properties.backup
    
  3. Use a text editor to create a file called boot.properties under the security directory. Enter the following lines in the file:

    username=weblogic_ecm
    password=welcome1
    
  4. Save the file.

  5. Stop the Administration Server:

    SOAHOST1> cd ORACLE_BASE/admin/domain_name/aserver/domain_name/bin
    SOAHOST1> ./stopWebLogic.sh
    
  6. Start the Administrator Server using the procedure in Section 5.5, "Starting the Administration Server on SOAHOST1."

11.1.2.3 Reassociating the Domain Credential Store

The reassociation of both the credential and the policy stores is accomplished as a unit using Fusion Middleware Control or the WLST command reassociateSecurityStore. See Section 11.1.4, "Reassociation of Credentials and Policies" for detailed steps.

11.1.3 Policy Store Configuration

The domain policy store is the repository of system and application-specific policies. In a given domain, there is one store that stores all policies that all applications deployed in the domain may use. This section provides the steps to configure Oracle Internet Directory LDAP as the policy store for the Oracle Enterprise Content Management Suite enterprise deployment topology. For more details on policy store configuration, refer to the "OPSS Authorization and the Policy Store" chapter in the Oracle Fusion Middleware Security Guide.

11.1.3.1 Prerequisites to Using an LDAP-Based Policy Store

In order to ensure the proper access to an LDAP server directory (Oracle Internet Directory) used as a policy store, you must set a node in the server directory.

An Oracle Internet Directory administrator must follow these steps to create the appropriate node in an Oracle Internet Directory Server:

  1. Create an LDIF file (assumed to be jpstestnode.ldif in this example) specifying the following DN and CN entries:

    dn: cn=jpsroot_ecm
    cn: jpsroot_ecm
    objectclass: top
    objectclass: OrclContainer
    

    The distinguished name of the root node (illustrated by the string jpsroot_ecm above) must be distinct from any other distinguished name. One root node can be shared by multiple WebLogic domains. It is not required that this node be created at the top level, as long as read and write access to the subtree is granted to the Oracle Internet Directory administrator.

  2. Import this data into Oracle Internet Directory server using the ldapadd command, as illustrated in the following example (the command is shown as two lines in the example below for readability purposes, but you should enter the command on a single line):

    OIDHOST1> ORACLE_HOME/bin/ldapadd -h ldap_host -p ldap_port -D
    cn=orcladmin -w password -c -v -f jpstestnode.ldif
    
  3. Verify that the node has been successfully inserted using the ldapsearch command, as illustrated in the following example (the command is shown as two lines in the example below for readability purposes, but you should enter the command on a single line):

    OIDHOST1> ORACLE_HOME/bin/ldapsearch -h ldap_host -p ldap_port -D
    cn=orcladmin -w password -b "cn=jpsroot_ecm" objectclass="orclContainer"
    
  4. When using Oracle Internet Directory as the LDAP-based policy store, run the oidstats.sql utility in the INFRADBHOST servers to generate database statistics for optimal database performance:

    ORACLE_HOME/bin/sqlplus
    

    Enter ODS as a user name. You will be prompted for credentials for the ODS user. Inside sqlplus, enter the command to gather the statistics info:

    SQLPLUS> @ORACLE_HOME/ldap/admin/oidstats.sql
    

    The oidstats.sql utility must be run just once after the initial provisioning. For details about this utility, consult the Oracle Fusion Middleware User Reference for Oracle Identity Management.

11.1.3.2 Reassociating the Domain Policy Store

Reassociating the policy store consists in migrating policy data from a file-based or LDAP-based repository to an LDAP-based repository; that is, reassociation changes the repository preserving the integrity of the data stored. For each policy in the source policy store, reassociation searches the target LDAP directory and, if it finds a match, it updates the matching policy as appropriate. If none is found, it simply migrates the policy as is.

At any time, after a domain policy store has been instantiated, a file-based or LDAP-based policy store can be reassociated into an LDAP-based policy store storing the same data. To support it, the domain has to be configured, as appropriate, to use an LDAP policy store.

The reassociation of both the credential and the policy stores is accomplished as a unit using Enterprise Manager Fusion Middleware Control or the WLST command reassociateSecurityStore. See Section 11.1.4, "Reassociation of Credentials and Policies" for detailed steps.

11.1.4 Reassociation of Credentials and Policies

To reassociate the policy and credential store with Oracle Internet Directory, use the WLST reassociateSecurityStore command. Follow these steps:

  1. From SOAHOST1, start the wlst shell:

    SOAHOST1>cd ORACLE_COMMON_HOME/common/bin
    SOAHOST1>./wlst.sh
    
  2. Connect to the WebLogic Administration Server using the wlst connect command shown below:

    Syntax:

    connect('Admin_User',"Admin_User_Password",t3://hostname:port)
    

    For example:

    connect("weblogic","welcome1","t3://ADMINVHN:7001")
    
  3. Run the reassociateSecurityStore command as shown below:

    Syntax:

    reassociateSecurityStore(domain="domain_name",admin="cn=orcladmin",
    password="orclPassword",ldapurl="ldap://LDAP_HOST:LDAP_PORT",servertype="OID",
    jpsroot="cn=jpsroot_ecm")
    

    For example:

    wls:/domain_name/serverConfig>reassociateSecurityStore(domain="domain_name", admin="cn=orcladmin",password="welcome1",ldapurl="ldap://oid.mycompany.com:389",servertype="OID",jpsroot="cn=jpsroot_ecm")
    

    The output for the command is shown below:

    {servertype=OID,jpsroot_ecm=cn=jpsroot_ecm_idm_idmhost1,admin=cn=orcladmin,
    domain=IDMDomain,ldapurl=ldap://oid.mycompany.com:389,password=welcome1}
    Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
    For more help, use help(domainRuntime)
    
    Starting Policy Store reassociation.
    LDAP server and ServiceConfigurator setup done.
    
    Schema is seeded into LDAP server
    Data is migrated to LDAP server
    Service in the server after migration has been tested to be available
    Update of jps configuration is done
    Policy Store reassociation done.
    Starting credential Store reassociation
    LDAP server and ServiceConfigurator setup done.
    Schema is seeded into LDAP server
    Data is migrated to LDAP server
    Service in LDAP server after migration has been tested to be available
    Update of jps configuration is done
    Credential Store reassociation done
    Starting keystore reassociation
    The server and ServiceConfigurator setup done.
    Schema is seeded into the server
    Data is migrated to the server
    Service in the server after migration has been tested to be available
    Update of jps configuration is done
    keystore reassociation done
    Jps Configuration has been changed. Please restart the server.
    
  4. Restart the Administration Server after the command completes successfully.

    To restart the Administration Server, use the procedure in Section 5.5, "Starting the Administration Server on SOAHOST1."

    Note:

    For credential and policy changes to take effect, the servers in the domain must be restarted.

11.1.4.1 Cataloging Oracle Internet Directory Attributes

An Oracle Internet Directory attribute used in a search filter must be indexed. The indexing is an optional procedure used to enhance performance. If not done yet in this OID, use the catalog tool to index attributes:

catalog connect="orcl" add=true attribute="orclrolescope" verbose="true"

Optionally, the attribute names can be placed in a file and processed in a batch as follows:

orclrolescope
orclassignedroles
orclApplicationCommonName
orclAppFullName
orclCSFAlias
orclCSFKey
orclCSFName
orclCSFDBUrl
orclCSFDBPort
orclCSFCredentialType
orclCSFExpiryTime
modifytimestamp
createtimestamp
orcljpsassignee

For more information on indexing OID attributes, see Oracle Fusion Middleware Reference for Oracle Identity Management.

11.2 Oracle Access Manager 10g Integration

This section describes how to set up Oracle Access Manager 10g as the single sign-on solution for the Oracle Enterprise Content Management Suite enterprise deployment topology. It contains the following sections:

11.2.1 Overview of Oracle Access Manager Integration

Oracle Access Manager (OAM) is the recommended single sign-on (SSO) solution for Oracle Fusion Middleware 11g Release 1. For more information on installing and configuring an OAM installation, see Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management. This section explains the procedure for configuring the Oracle ECM installation with an existing OAM 10g installation and the underlying directory service. Oracle recommends using either Oracle Internet Directory (OID) or Oracle Virtual Directory (OVD) or both of these directory services.

Note:

The Oracle ECM enterprise deployment topology described in this book uses a single sign-on configuration where both the Oracle ECM system and the single sign-on system are in the same network domain (mycompany.com). For a multi-domain configuration, please refer to the required configuration steps in "Configuring Single Sign-On" of the Oracle Access Manager Access Administration Guide.

11.2.2 Prerequisites for Oracle Access Manager

The setup for Oracle Access Manager (OAM) assumes an existing OAM 10g installation complete with Access Managers and a policy protecting the Policy Manager. For more information on installing and configuring an OAM installation, see Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management. This setup includes a directory service such as Oracle Internet Directory (OID), either stand-alone or as part of an Oracle Virtual Directory (OVD) configuration. This section provides the necessary steps for configuring your enterprise deployment with either OID or OVD.

In addition, the OAM installation should have its own Web server configured with WebGate. This section also provides the steps for using the OAM Web server as a delegated authentication server.

11.2.3 Configuring Oracle Access Manager

This section covers the following topics:

11.2.3.1 Collecting the Information for the OAM Configuration Tool

The OAM Configuration Tool (oamcfg) starts a series of scripts and sets up the required policies for Oracle Access Manager. It requires various parameters as inputs. Specifically, it creates the following:

  1. A form authentication scheme in OAM

  2. Policies to enable authentication in Oracle WebLogic Server

  3. A WebGate entry in OAM to enable Oracle HTTP Server WebGates (from your Web Tier) to protect your configured application

  4. A host identifier, depending on the scenario chosen (a default host identifier would be used, if not provided)

  5. A host identifier, depending on the scenario chosen (a default host identifier would be used, if not provided)

  6. Policies to protect and unprotect application specific URLs.

The following information should be collected or prepared prior to running the OAM Configuration tool:

  1. Password: Create a secure password. This will be used as the password for the WebGate installation created later.

  2. LDAP Host: host name of the directory server or load balancer address in the case of a high-availability or enterprise deployment configuration.

  3. LDAP Port: port of the directory server.

  4. LDAP USER DN: DN of the LDAP admin user. This will be a value such as "cn=orcladmin."

  5. LDAP password: password of the LDAP admin user.

  6. oam_aaa_host: host name of an Oracle Access Manager.

  7. oam_aaa_port: port of the Oracle Access Manager.

11.2.3.2 Running the OAM Configuration Tool

Before running the OAM Configuration Tool, you must first add the required resources to OAM 10g for the Oracle ECM components. Create a file containing the list of URIs you want to protect with the following content:

########################
#Product Name: ECM
########################
###########################
protected_uris
###########################
/adfAuthentication
/imaging/faces
/em
/console
/DefaultToDoTaskFlow
/sdpmessaging/userprefs-ui
/integration/worklistapp
/workflow/sdpmessagingsca-ui-worklist
/soa/composer
/soa-infra/deployer
/soa-infra/events/edn-db-log
/soa-infra/cluster/info

#"Policy using Basic Authn Scheme" is the name of the policy
#"Basic Over LDAP" is the authentication scheme configured for this #policy
# Note that the name of the policy and the scheme name in the URIs file
# is tab-separated. In other words, there must be a tab between
# 'Basic Authn Scheme' and 'OraDefaultBasicAuthNScheme' below.
Policy using Basic Authn Scheme OraDefaultBasicAuthNScheme
/inspection.wsil

###########################
public_uris
###########################

/soa-infra/services
/soa-infra/directWSDL

Note:

In OAM 10g, all resources under a URL prefix are protected by the default rules of a policy domain unless more specific rules are applied to them through policies. Refer to the Oracle Access Manager Access Administration Guide for details on the different patterns that can be used if more specialized protection patterns need to be used.

The OAM Configuration tool resides in the ORACLE_COMMON_HOME/modules/oracle.oamprovider_11.1.1 directory (ORACLE_COMMON_HOME depends on which machine you are running the configuration tool). The tool can be run from any machine with the required installation files. In this case, we run it from ECMHOST1. Run the OAM Configuration Tool for OAM 10g registration as follows (all on a single command line):

MW_HOME/jrockit_160_version/bin/java -jar oamcfgtool.jar mode=CREATE
app_domain="ECM_EDG"
uris_file="full_path_to_file_containing_uri_definitions"
app_agent_password=password_to_be_provisioned_for_App_Agent
ldap_host=OID.MYCOMPANY.COM
ldap_port=389
ldap_userdn="cn=orcladmin"
ldap_userpassword=Password_of_LDAP_admin_user
oam_aaa_host=OAMHOST1
oam_aaa_port=OAMPORT1

If your command ran successfully, you should see the following output:

Date,Time oracle.security.oam.oamcfg.OAMCfgGlobalConfigHandler constructGlobalConfig
INFO: Processed input parameters
May 9, 2011 5:09:40 AM oracle.security.oam.oamcfg.OAMCfgGlobalConfigHandler constructGlobalConfig
INFO: Initialized Global Configuration
Date,Time oracle.security.oam.oamcfg.create.impl.OAMCfgConfigCreator doCreate
INFO: Successfully completed the Create operation.
Date,Time oracle.security.oam.oamcfg.create.impl.OAMCfgConfigCreator doCreate
INFO:  Operation Summary:
Date,Time oracle.security.oam.oamcfg.create.impl.OAMCfgConfigCreator doCreate
INFO:      Policy Domain  : ECM_EDG
Date,Time oracle.security.oam.oamcfg.create.impl.OAMCfgConfigCreator doCreate
INFO:      Host Identifier: ECM_EDG
Date,Time oracle.security.oam.oamcfg.create.impl.OAMCfgConfigCreator doCreate
INFO:      Access Gate ID : ECM_EDG_AG

11.2.3.3 Oracle Access Manager Logout Guidelines

For applications invoked by Oracle UCM and Oracle I/PM to comply with Oracle Access Manager logout guidelines (in particular, applications that invoke a logout through /adfAuthentication?logout=true&end_url=some_URI), integration with an Oracle Access Manager 10g environment requires additional configuration on the WebGate to handle the end_url. Without this additional configuration, you are logged out, but not redirected to the end URL because Oracle Access Manager 10g WebGate does not process end_url. For information about configuration procedures, see Oracle Fusion Middleware Security Guide.

When integrating Oracle UCM with OAM 10g, you must add the URL /oamsso/logout.html to the logout URL setting for the Access Gate for the single sign-on logout to work properly. See "Configuring a Single Sign-On Logout URL" and "AccessGate Configuration Parameters" in the Oracle Access Manager Access Administration Guide for more information.

11.2.3.4 Verifying Successful Creation of the Policy Domain and AccessGate

Verifying the Policy Domain

Perform these steps to verify the policy domain:

  1. Log in to Oracle Access Manager:

    http://OAMADMINHOST:port/access/oblix/
    
  2. Click Policy Manager.

  3. Click the My Policy Domains link on the left panel. You will see a list of all policy domains, which includes the domain you just created. It will have the suffix _PD (for example, ECM_EDG_PD ). In the third column (URL prefixes), you will also see the URIs you specified during the creation of this domain).

  4. Click the link to the policy domain you just created to go to the General area of this domain.

  5. Click the Resources tab and you will see the URIs you specified. You can also click other tabs to view other settings.

Verifying the AccessGate Configuration

Perform these steps to verify the AccessGate configuration:

  1. Click the Access System Console link on the top right-hand side (this acts like a toggle; after you click it, it becomes the Policy Manager link).

  2. Click the Access System Configuration tab.

  3. Click the AccessGate Configuration link on the left panel.

  4. Enter 'ECM_EDG' as the search criterion (or any other substring you may have used as the app_domain name in Section 11.2.3.2, "Running the OAM Configuration Tool"), and click Go.

  5. Once the access gate for the domain you just created shows up (this will have the suffix _AG (for example, ECM_EDG_AG), click it, and you will see the details of the access gate you just created.

11.2.3.5 Verifying That the Cookieless Basic Authorization Scheme Has Been Properly Assigned

Perform these steps to verify that the cookieless basic authorization scheme has been properly assigned:

  1. Log in to Oracle Access Manager:

    http://OAMADMINHOST:port/access/oblix/
    
  2. Click Policy Manager.

  3. Click the My Policy Domains link on the left panel. You will see a list of all policy domains that have been created.

  4. Click ECM_EDG.

  5. Open the Policies tab and then click Policy using Basic Authn Scheme.

  6. Open the General section.

    The inspection.wsil resource should be listed.

  7. Open the Authentication Rule section.

    The OraDefaultBasicAuthNScheme authentication scheme should be listed.

11.2.3.6 Updating the Host Identifier

The OAM Configuration Tool uses the value of the app_domain parameter to create a host identifier for the policy domain. This host identifier must be updated with all the host name variations for the host so that the configuration works correctly.

Perform these steps to update the host identifier created by the OAM Configuration Tool:

  1. Navigate to the Access System Console by specifying the following URL in your web browser:

    http://host_name:port/access/oblix
    

    where host_name refers to the host where the WebPass Oracle HTTP Server instance is running and port refers to the HTTP port of the Oracle HTTP Server instance.

  2. When prompted for a username and password, log in as an administrator. Click OK.

  3. On the Access System main page, click the Access System Console link.

  4. On the Access System Console page, open the Access System Configuration tab.

  5. On the Access System Configuration page, click Host Identifiers at the bottom left.

  6. On the List all host identifiers page, click on the host identifier created by the OAM Configuration Tool (for example, ECM_EDG).

  7. On the Host Identifier Details page, click Modify.

  8. Add the Preferred HTTP Host value used in the Access System Configuration. The following is a list of all the possible host name variations using SSO/ WebGate:

    webhost1.mydomain.com:7777
    webhost2.mydomain.com:7777
    soahost1vhn1.mycompany.com:8001
    soahost2vhn1.mycompany.com:8001
    soainternal.mycompany.com:80
    ecmhost1vhn1.mycompany.com:16000
    ecmhost2vhn1.mycompany.com:16000
    ecmhost1.mycompany.com:16200
    ecmhost2.mycompany.com:16200
    ecm.mycompany.com:443
    ecminternal.mycompany.com:80
    admin.mycompany.com:80
    adminvhn.mycompany.com:7001
    sso.mycompany.com:7779 [WebGate access with Oracle IDM port]
    
  9. Select the check box next to Update Cache and then click Save.

    A message box with the following message is displayed: "Updating the cache at this point will flush all the caches in the system. Are you sure?".

    Click OK to finish saving the configuration changes.

  10. Verify the changes on the Host Identifier Details page.

11.2.3.7 Updating the WebGate Profile

The OAM Configuration Tool populates the Preferred_HTTP_Host and hostname attributes for the WebGate profile that is created with the value of the app_domain parameter. Both these attributes must be updated with the proper values for the configuration to work correctly.

Perform these steps to update the WebGate profile created by the OAM Configuration Tool:

  1. Navigate to the Access System Console by specifying the following URL in your web browser:

    http://host_name:port/access/oblix
    

    where host_name refers to the host where the WebPass Oracle HTTP Server instance is running and port refers to the HTTP port of the Oracle HTTP Server instance.

  2. On the Access System main page, click the Access System Console link, then log in as an administrator.

  3. On the Access System Console main page, click Access System Configuration, and then click the Access Gate Configuration Link in the left pane to display the AccessGates Search page.

  4. Enter the proper search criteria and click Go to display a list of access gates.

  5. Select the access gate created by the OAM Configuration Tool (for example, ECM_EDG_AG.

  6. On the AccessGate Details page, select Modify to display the Modify AccessGate page.

  7. On the Modify AccessGate page, update the following:

    • Hostname: Update the hostname with the name of the computer where WebGate is running, for example: webhost1.mycompany.com.

    • Preferred HTTP Host: Update the Preferred_HTTP_Host with one of the hostname variations specified in the previous section, for example: admin.mycompany.com:80.

    • Primary HTTP Cookie Domain: Update the Primary HTTP Cookie Domain with the domain suffix of the host identifier, for example: mycompany.com

  8. Click Save.

    A message box with the "Are you sure you want to commit these changes?" message is displayed.

    Click OK to finish updating the configuration.

  9. Verify the values displayed on the Details for AccessGate page to confirm that the updates were successful.

11.2.3.8 Adding Additional Access Servers

Perform these steps to assign an access server to the WebGate:

  1. Log in as the Administrator on the Access System Console.

  2. Navigate to the Details for AccessGate page, if necessary. From the Access System Console, select Access System Configuration, then AccessGate Configuration, then the link for the WebGate (ECM_EDG_AG).

  3. On the Details for AccessGate page, click List Access Servers.

  4. A page appears showing the primary or secondary Access Servers currently configured for this WebGate.

    Click Add.

  5. On the Add a New Access Server page, select an Access Server from the Select Server list, specify Primary Server, and define two connections for the WebGate.

    Click the Add button to complete the association.

  6. A page appears, showing the association of the Access Server with the WebGate. Click the link to display a summary and print this page for later use.

  7. Repeat steps 3 through 6 to associate more access servers to the WebGate.

11.2.3.9 Configuring Delegated Form Authentication

Perform these steps to configure the form authentication to redirect to the WebGate that was installed with the OAM installation:

  1. Open the Access System Console.

  2. In the Access System Configuration screen, select Authentication Management from the left-hand bar.

  3. Select OraDefaultFormAuthNScheme.

  4. Click Modify.

  5. In the Challenge Redirect field, enter the host and port of the IDM installation; for example: http://sso.mycompany.com. Click Save when you are done.

A WebGate should already be installed in the IDM installation. Refer to Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management for details.

11.2.4 Installing and Configuring WebGate

WebGate needs to be installed on each of the WEBHOSTn machines in order to secure the web tier:

Note:

There is a known issue with the Oracle Access Manager installer that sometimes manifests as a hang at install time on Linux. This is a third-party issue caused by InstallShield. To work around this issue, follow these steps:
  1. Copy and paste the following in the shell where you start the installer:

    cd /tmp
    mkdir bin.$$
    cd bin.$$
    cat > mount <<EOF
    #! /bin/sh
    exec /bin/true
    EOF
    chmod 755 mount
    export PATH=`pwd`:$PATH
    
  2. Run the installation.

  3. When the installer is finished running, clean the temporary directory using this command:

    rm -r /tmp/bin.$$
    
  1. Launch the WebGate installer (see Section 1.8, "What to Install" for information on where to obtain it) using the following command:

    WEBHOSTn> ./Oracle_Access_Manager10_1_4_3_0_linux_OHS11g_WebGate –gui
    
  2. The Welcome screen opens. Click Next.

  3. In the Customer Information screen (Figure 11-1), enter the user name and user group that the web server is running as. Click Next to continue.

    Figure 11-1 Customer Information Screen

    Description of Figure 11-1 follows
    Description of "Figure 11-1 Customer Information Screen"

  4. In the installation target screen (Figure 11-2), specify the directory where WebGate should be installed. Click Next to continue.

    Figure 11-2 Installation Target Screen

    Description of Figure 11-2 follows
    Description of "Figure 11-2 Installation Target Screen"

  5. In the installation summary screen, click Next.

  6. Download the required GCC runtime libraries for WebGate as instructed in the WebGate configuration screen (Figure 11-3), and use Browse to point to their location on the local computer. Click Next to continue.

    Figure 11-3 Runtime Libraries Screen

    Description of Figure 11-3 follows
    Description of "Figure 11-3 Runtime Libraries Screen"

  7. The installer now creates the required artifacts. After that is completed, click Next to continue.

  8. In the transport security mode screen (Figure 11-4), select "Open Mode: No Encryption" and click Next to continue.

    Figure 11-4 Transport Security Mode Screen

    Description of Figure 11-4 follows
    Description of "Figure 11-4 Transport Security Mode Screen"

  9. In the WebGate configuration screen, provide the details of the access server that will be used. You must provide the following information:

    • WebGate ID, as provided when the OAM configuration tool was executed

    • Password for WebGate

    • Access Server ID, as reported by the OAM Access Server configuration

    • Access Server host name, as reported by the OAM Access Server configuration

    • Access Server port number, as reported by the OAM Access Server configuration

    Note:

    The Access Server ID, host name, and port are all required.

    You can obtain these details from your Oracle Access Manager administrator. Click Next to continue.

    Figure 11-5 Access Server Configuration Screen

    Description of Figure 11-5 follows
    Description of "Figure 11-5 Access Server Configuration Screen"

  10. In the Configure Web Server screen, click Yes to automatically update the web server. Click Next to continue.

  11. In the next Configure Web Server screen, specify the full path of the directory containing the httpd.conf file. This file is located in the following directory:

    ORACLE_BASE/admin/OHS_Instance/config/OHS/OHS_Component_Name
    

    For example:

    /u01/app/oracle/admin/ohs_instance2/config/OHS/ohs2/httpd.conf
    

    Click Next to continue.

  12. In the next Configure Web Server page, a message informs you that the Web server configuration has been modified for WebGate. Click Yes to confirm.

  13. Stop and start your Web server for the configuration updates to take effect. Click Next to continue.

  14. In the next Configure Web Server screen, the following message is displayed: "If the web server is set up in SSL mode, then the httpd.conf file needs to be configured with the SSL related parameters. To manually tune your SSL configuration, please follow the instructions that come up". Click Next to continue.

  15. In the next Configure Web Server screen, a message with the location of the document that has information on the rest of the product setup and Web server configuration is displayed. Choose No and click Next to continue.

  16. The final Configure Web Server screen appears with a message to manually launch a browser and open the HTML document for further information on configuring your Web server. Click Next to continue.

  17. The Oracle COREid Readme screen appears. Review the information on the screen and click Next to continue.

  18. A message appears (along with the details of the installation) informing you that the installation was successful.

11.2.5 Configuring IP Validation for the EDG Webgate

IP validation determines if a client's IP address is the same as the IP address stored in the ObSSOCookie cookie generated for single sign-on. IP validation can cause issues in systems using load balancer devices configured to perform IP termination or when the authenticating webgate is front-ended by a different load balancing router (LBR) or proxy than the one front-ending the enterprise deployment.

Perform these steps to make sure your enterprise deployment's LBR or proxy are not validated in these cases:

  1. Open the Access System Console and log in as an administrator at the following URL:

    http://host_name:port/access/oblix
    

    where host_name refers to the host where the WebPass Oracle HTTP Server instance is running and port refers to the HTTP port of the Oracle HTTP Server instance.

  2. On the Access System main page, click the Access System Console link.

  3. On the Access System Console main page, click Access System Configuration, and then click the Access Gate Configuration link in the left pane to display the AccessGates Search page.

  4. Enter the appropriate search criteria and click Go to display a list of access gates.

  5. Select the access gate created by the Oracle Access Manager Configuration Tool.

  6. Click Modify at the bottom of the page.

  7. In the IPValidationException field, enter the IP address of the load balancer or proxy front-ending the enterprise deployment.

  8. Click Save at the bottom of the page.

11.2.6 Setting Up WebLogic Authenticators

This section assumes that you have already set up the LDAP authenticator by following the steps in Section 11.1.2.1, "Creating the LDAP Authenticator." If you have not already created the LDAP authenticator, do it before continuing with this section.

This section covers the following topics:

11.2.6.1 Back Up Configuration Files

To be safe, first back up the relevant configuration files:

ORACLE_BASE/admin/domain_name/aserver/domain_name/config/config.xml
ORACLE_BASE/admin/domain_name/aserver/config/fmwconfig/jps-config.xml
ORACLE_BASE/admin/domain_name/aserver/domain_name/config/fmwconfig/system-jazn-data.xml

Also back up the boot.properties file for the Administration Server.

11.2.6.2 Setting Up the OAM ID Asserter

Perform these steps to set up the OAM ID Asserter:

  1. Log in to Weblogic Console, if not already logged in.

  2. Click Lock & Edit.

  3. Navigate to SecurityRealms, then the default realm name, and then Providers.

  4. Click New and select OAM Identity Asserter from the dropdown menu.

  5. Name the asserter (for example, "OAM ID Asserter") and click OK.

  6. Click the newly added asserter to see the configuration screen for OAM Identity Asserter.

  7. Set the control flag to 'REQUIRED' and click Save.

  8. Open the Provider Specific tab to configure the following required settings:

    • Primary Access Server: provide OAM server endpoint information in host:port format.

    • AccessGate Name: name of the AccessGate (for example, ECM_EDG_AG).

    • AccessGate Password: password for the AccessGate (optional).

  9. Save the settings.

11.2.6.3 Setting the Order of Providers

Reorder the OAM Identity Asserter, OID/OVD Authenticator, and Default Authenticator by ensuring that the control flag for each authenticator is set as follows:

  • OAM Identity Asserter: REQUIRED

  • OID LDAP Authenticator (or OVD LDAP Authenticator): SUFFICIENT

  • Default Authenticator: SUFFICIENT

  • DefaultIdentityAsserter

After reordering, save the settings, activate the changes, and restart all servers.

Note:

Do not forget to create a new credential for the new user. See Section 8.15, "Configuring BPEL CSF Credentials" for further details. (This book uses the 'weblogic_ecm' user as an example for SSO.)

11.3 Oracle Access Manager 11g Integration

This section describes how to set up Oracle Access Manager 11g as the single sign-on solution for the Oracle Enterprise Content Management Suite enterprise deployment topology. It contains the following sections:

11.3.1 Overview of Oracle Access Manager Integration

Oracle Access Manager (OAM) is the recommended single sign-on solution for Oracle Fusion Middleware 11g Release 1. For more information on installing and configuring an OAM installation, see Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management. This section explains the procedure for configuring the Oracle ECM installation with an existing OAM 11g installation and the underlying directory service. Oracle recommends using either Oracle Internet Directory (OID) or Oracle Virtual Directory (OVD) or both of these directory services.

Note:

The Oracle ECM enterprise deployment topology described in this guide uses a single sign-on configuration where both the Oracle ECM system and the single sign-on system are in the same network domain (mycompany.com). For a multi-domain configuration, please refer to the required configuration steps in "Configuring Single Sign-On," of the Oracle Access Manager Access Administration Guide.

11.3.2 Prerequisites for Oracle Access Manager

The setup for Oracle Access Manager (OAM) assumes an existing OAM 11g installation complete with Access Managers and a policy protecting the Policy Manager. For more information on installing and configuring an OAM installation, see Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management. This setup includes a directory service such as Oracle Internet Directory (OID), either stand-alone or as part of an Oracle Virtual Directory (OVD) configuration. This section provides the necessary steps for configuring your enterprise deployment with either OID or OVD.

In addition, the OAM installation should have its own Web server configured with WebGate. This section also provides the steps for using the OAM Web server as a delegated authentication server.

11.3.3 Setting Up WebGate

You must set up a WebGate on each of the WEBHOST machines where Oracle HTTP Server has already been installed. Sections (UNKNOWN STEP NUMBER) and (UNKNOWN STEP NUMBER) should be repeated for each WEBHOSTn in the deployment environment.

This section covers the following topics:

11.3.3.1 Installing GCC Libraries

You must download and install third-party GCC libraries on your machine before installing WebGate. You can download the appropriate GCC library from the following third-party website:

http://gcc.gnu.org

For 32-bit Linux, the required libraries are libgcc_s.so.1 and libstdc++.so.5 with a version number of 3.3.2. Table 11-1 lists the versions of third-party GCC libraries for Linux and Solaris.

Table 11-1 Versions of GCC Third-Party Libraries for Linux and Solaris

Operating System Architecture GCC Libraries Required Library Version

Linux 32-bit

x86

libgcc_s.so.1

libstdc++.so.5

3.3.2

Linux 64-bit

x64

libgcc_s.so.1

libstdc++.so.6

3.4.6

Solaris 64-bit

SPARC

libgcc_s.so.1

libstdc++.so.5

3.3.2


11.3.3.2 Installing WebGate

This section describes the procedures for installing WebGate.

Launching the Installer

The installer program for Oracle HTTP Server 11g Webgate for Oracle Access Manager is included in the webgate.zip file.

Perform these steps to start the installation wizard:

  1. Extract the contents of the webgate.zip file to a directory. By default, this directory is named webgate.

  2. Move to the Disk1 subdirectory under the webgate directory.

  3. Start the installer using the following command:

    $ ./runInstaller -jreLoc WebTier_Home/jdk
    

    Note:

    When you install Oracle HTTP Server, the jdk directory is created under the WebTier_Home directory. You must enter the absolute path of the JRE folder located in this JDK when launching the installer.

    After the installer starts, the Welcome screen opens.

Installation Flow and Procedure

If you need additional help with any of the installation screens, click Help to access the online help.

Perform these steps to install Oracle HTTP Server 11g Webgate for Oracle Access Manager:

  1. In the Welcome screen, click Next.

  2. In the Prerequisite Checks screen, click Next.

  3. In the Specify Installation Location screen, specify the Middleware Home and Oracle Home locations.

    Note:

    The Middleware Home contains an Oracle Home for Oracle Web Tier.

    Click Next.

  4. In the Specify GCC Library screen, specify the directory that contains the GCC libraries, or click Browse to navigate to their location on your local computer (see Section 11.3.3.1, "Installing GCC Libraries"), and click Next.

  5. In the Installation Summary screen, verify the information on this screen and click Install to begin the installation.

  6. In the Installation Progress screen, you may be prompted to run the ORACLE_HOME/oracleRoot.sh script to set up the proper file and directory permissions.

    Click Next to continue.

  7. In the Installation Complete screen, click Finish to exit the installer.

11.3.3.3 Post-Installation Steps

Complete the following procedure after installing Oracle HTTP Server 11g Webgate for Oracle Access Manager:

  1. Move to the following directory under your Oracle Home for Webgate:

    $ cd Webgate_Oracle_Home/webgate/ohs/tools/deployWebGate
    

    Webgate_Oracle_Home is the directory where you have installed Oracle HTTP Server Webgate and created as the Oracle Home for Webgate, for example:

    MW_HOME/Oracle_OAMWebGate1
    

    Note:

    Oracle_OAMWebGate1 is the default.
  2. On the command line, run the following command (on a single line) to copy the required bits of agent from the Webgate_Home directory to the Webgate Instance location:

    $ ./deployWebGateInstance.sh -w Webgate_Instance_Directory 
    
    -oh Webgate_Oracle_Home
    

    Webgate_Instance_Directory is the location of Webgate Instance Home, which is same as the Instance Home of Oracle HTTP Server, for example:

    MW_HOME/Oracle_WT1/instances/instance1/config/OHS/ohs1
    

    Note:

    an Instance Home for Oracle HTTP Server is created after you configure Oracle HTTP Server.
  3. Run the following command to ensure that the LD_LIBRARY_PATH variable contains Oracle_Home_for_Oracle_HTTP_Server/lib:

    $ export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:Oracle_Home_for_Oracle_HTTP_Server/lib
    
  4. From your present working directory, move up one directory level:

    $ cd Webgate_Home/webgate/ohs/tools/setup/InstallTools
    
  5. On the command line, run the following command (on a single line) to copy apache_webgate.template from the Webgate_Home directory to the Webgate Instance location (renamed to webgate.conf) and update the httpd.conf file to add one line to include the name of webgate.conf:

    $ ./EditHttpConf -w Webgate_Instance_Directory [-oh Webgate_Oracle_Home] 
    
    [-o output_file]
    

    Note:

    The -oh WebGate_Oracle_Home and -o output_file parameters are optional.

    where WebGate_Oracle_Home is the directory where you have installed Oracle HTTP Server Webgate for Oracle Access Manager and created as the Oracle Home for Webgate, for example:

    MW_HOME/Oracle_OAMWebGate1
    

    The Webgate_Instance_Directory is the location of Webgate Instance Home, which is same as the Instance Home of Oracle HTTP Server, for example:

    MW_HOME/Oracle_WT1/instances/instance1/config/OHS/ohs1
    

    The output_file is the name of the temporary output file used by the tool, for example:

    Edithttpconf.log
    

11.3.4 Registering the WebGate Agent

This section describes the procedures for registering the WebGate Agent:

11.3.4.1 Extracting and Using the RREG Tool

The RREG tool is part of the OAM 11g installation. If it is not already available, extract it using the following procedure:

  1. After installing and configuring Oracle Access Manager, navigate to the following location:

    IDM_Home/oam/server/rreg/client
    
  2. On the command line, untar the RREG.tar.gz file using gunzip, as in the following example:

    gunzip RREG.tar.gz
    
    tar -xzvf RREG.tar
    
  3. Edit the oamreg.sh script in the RREG_HOME/bin directory and change the OAM_REG_HOME parameter according to your setup:

    OAM_REG_HOME=RREG_Home
    

    (where RREG_Home is the directory to which you extracted the contents of RREG.tar.gz and rreg).

    Save the script file.

11.3.4.2 Updating the OAM11gRequest File

The RREG_Home/input directory contains a template file named OAM11gRequest.xml. Copy this file to ECMOAM11gRequest.xml and edit that file in order to create the policies for the Oracle ECM installation. After editing, the file should look as follows:

Note:

Replace OAM_HOST, OAM_ADMINSERVER_PORT, WEBTIER_HOST_ECM, and FRONT_END_URL_ECM with their respective values in your installation.
<?xml version="1.0" encoding="UTF-8"?>
 
<!-- Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
 
 NAME: OAM11GRequest_short.xml - Template for OAM 11G Agent Registration request 
   file
   (Shorter version - Only mandatory values - Default values will be used for all 
   other fields)
   DESCRIPTION: Modify with specific values and pass file as input to the tool.
-->
 
-->
<OAM11GRegRequest>
    <serverAddress>http://OAM_HOST:OAM_ADMINSERVER_PORT</serverAddress>
    <hostIdentifier>WEBTIER_HOST_ECM</hostIdentifier>
    <agentName>WEBTIER_HOST_ECM</agentName>
    <applicationDomain>FRONT_END_URL_ECM</applicationDomain>
    <cachePragmaHeader>private</cachePragmaHeader>
    <cacheControlHeader>private</cacheControlHeader>
    <ipValidation>1</ipValidation>
    <logOutUrls>
        <url>/oamsso/logout.html</url>
    </logOutUrls>
 
    <protectedResourcesList>
        <resource>/adfAuthentication</resource>
        <resource>/adfAuthentication/.../*</resource>
        <resource>/imaging/faces</resource>
        <resource>/imaging/faces/.../*</resource>
        <resource>/em</resource>
        <resource>/em/.../*</resource>
        <resource>/console</resource>
        <resource>/console/.../*</resource>
        <resource>/DefaultToDoTaskFlow</resource>
        <resource>/DefaultToDoTaskFlow/.../*</resource>
        <resource>/sdpmessaging/userprefs-ui</resource>
        <resource>/sdpmessaging/userprefs-ui/.../*</resource>
        <resource>/integration/worklistapp</resource>
        <resource>/integration/worklistapp/.../*</resource>
        <resource>/workflow/sdpmessagingsca-ui-worklist</resource>
        <resource>/workflow/sdpmessagingsca-ui-worklist/.../*</resource>
        <resource>/soa/composer</resource>
        <resource>/soa/composer/.../*</resource>
        <resource>/soa-infra/deployer</resource>
        <resource>/soa-infra/events/edn-db-log</resource>
        <resource>/soa-infra/cluster/info</resource>
        <resource>/inspection.wsil</resource>
        <resource>/soa-infra</resource>
    </protectedResourcesList>
 
    <publicResourcesList> 
        <resource>/cs</resource>
        <resource>/cs/.../*</resource>
        <resource>/_ocsh</resource>
        <resource>/_ocsh/.../*</resource>
        <resource>/imaging</resource>
        <resource>/imaging/.../*</resource>
        <resource>/soa-infra/services/.../*</resource>
        <resource>/soa-infra/directWSDL</resource>
        <resource>/soa-infra/directWSDL/.../*</resource>
        <resource>/ucs/messaging/webservice</resource>
        <resource>/ucs/messaging/webservice/.../*</resource>
    </publicResourcesList>
 
    <userDefinedParameters>
        <userDefinedParam>
            <name>ipValidationExceptions</name>
            <value>10.1.1.1</value>
        </userDefinedParam>
    </userDefinedParameters>
</OAM11GRegRequest>

11.3.4.3 Running the oamreg Tool

Run the oamreg tool using the following command:

$ ./RREG_Home/bin/oamreg.sh inband input/ECMOAM11gRequest.xml

The run should look as follows:

------------------------------------------------
Welcome to OAM Remote Registration Tool!
Parameters passed to the registration tool are:
Mode: inband
Filename: /u01/app/oracle/product/fmw/iam/oam/server/rreg/client/rreg/input/ECMOAM11GRequest.xml
Enter admin username:oamadmin
Username: your_oamadmin_user
Enter admin password: your_oamadmin_password
Do you want to enter a Webgate password?(y/n): y
Enter webgate password: your_webgate_password
Enter webgate password again: your_webgate_password
Password accepted. Proceeding to register..
Apr 18, 2011 12:22:36 PM oracle.security.am.engines.rreg.client.handlers.request.OAM11GRequestHandler getWebgatePassword
INFO: Passwords matched and accepted.
Do you want to import an URIs file?(y/n): n

----------------------------------------
Request summary:
OAM11G Agent Name:WEBTIER_HOST_ECM
URL String:WEBTIER_HOST_ECM
Registering in Mode:inband
Your registration request is being sent to the Admin server at: http://oamserver.mycompany.com:7001
----------------------------------------

Inband registration process completed successfully! Output artifacts are created in the output folder.

11.3.4.4 Changing the inspection.wsil Resource to Use the Basic Authentication Scheme

By default, the inspection.wsil resource is set to use the form authentication scheme. For the connection between the workflow and Oracle I/PM to work, this resource must be updated to use the basic authentication scheme instead:

  1. Log on to the Oracle Access Manager console at http://OAM_HOST:OAM_ADMINSERVER_PORT/oamconsole.

  2. Using the navigation tree on the left, choose Application Domains and then the application domain name to navigate to the application domain created (FRONT_END_URL_ECM).

  3. Expand your application domain's name.

  4. Expand Authentication Policies.

  5. Double-click on Protected Resource Policy.

  6. Select the inspection.wsil and inspection.wsil/.../* resources and click the Delete icon in the Resources pane to remove them. (Please note that the inspection.wsil/.../* resource was automatically added during the registration.)

  7. Click Apply and confirm the action when prompted.

  8. In the navigation tree, click Authentication Policies again, and click the Create button in the tool bar above the navigation tree.

    1. Enter a name for the policy (for example, 'New Basic Policy').

    2. Select BasicSessionlessScheme as the authentication scheme.

    3. Click Apply.

      You will see the newly created policy under Authentication Policies in the navigation tree.

    4. Open the newly created policy.

    5. On the Resources pane, click the Add icon (plus sign) on the right and add the inspection.wsil and inspection.wsil/.../* resources.

    6. Click Apply.

  9. Click the refresh icon on the navigation tree and verify the new authentication policy (click on it and make sure the inspection.wsil and and inspection.wsil/.../* resources were added).

Note:

Do not forget to create a new credential for the new user. See Section 8.15, "Configuring BPEL CSF Credentials" for further details. (This book uses the 'weblogic_ecm' user as an example for SSO.)

11.3.4.5 Updating the OAM 11g Server configuration to Support the Basic Cookieless Scheme

You must set the NoUniqueSessionsFor10gAgents parameter in the OAM 11g configuration to 'true'. To do this, edit the oam-config.xml file located in the IDM_Home/oam/server/config directory and change the line

<Setting Name="NoUniqueSessionsFor10gAgents" Type="xsd:string">false</Setting>

to

<Setting Name="NoUniqueSessionsFor10gAgents" Type="xsd:string">true</Setting>

Save the file, and restart the Oracle Access Manager server in your identity management system for the change to take effect.

11.3.4.6 Copying Access files to WEBHOSTs

The following two files are generated in RREG_Home/output/WEBTIER_HOST_ECM:

  • ObAccessClient.xml

  • cwallet.sso

Copy these files to the webgate instance location on the WEBHOST machine (Webgate_Instance_Home/config/OHS/ohsN/webgate/config/).

11.3.5 Setting Up the WebLogic Authenticators

This section assumes that you have already set up the LDAP authenticator by following the steps in Section 11.1.2.1, "Creating the LDAP Authenticator." If you have not already created the LDAP authenticator, do it before continuing with this section.

This section covers the following topics:

11.3.5.1 Backing Up Configuration Files

To be safe, first back up the relevant configuration files:

ORACLE_BASE/admin/domain_name/aserver/domain_name/config/config.xml 
ORACLE_BASE/admin/domain_name/aserver/domain_name/config/fmwconfig/jps-config.xml
ORACLE_BASE/admin/domain_name/aserver/domain_name/config/fwmconfig/ system-jazn-data.xml

In addition, back up the boot.properties file for the Administration Server.

11.3.5.2 Setting Up the OAM ID Asserter

Perform these steps to set up the OAM ID Asserter:

  1. Log in to Weblogic Console, if not already logged in.

  2. Click Lock & Edit.

  3. Navigate to SecurityRealms, then the default realm name, and then Providers.

  4. Click New and select OAM Identity Asserter from the dropdown menu.

  5. Name the asserter (for example, "OAM ID Asserter") and click OK.

  6. Click the newly added asserter to see the configuration screen for OAM Identity Asserter.

  7. Set the control flag to 'REQUIRED'.

  8. Select both the ObSSOCookie and OAM_REMOTE_USER options under active types.

  9. Save the settings.

Finally, log in to the WLST console as an administrator and run the following command:

addOAMSSOProvider(loginuri="/${app.context}/adfAuthentication",logouturi="oamsso/logout.html")

11.3.5.3 Setting the Order of Providers

Perform these steps to set the order of the providers:

  1. Log in to Weblogic Console, if not already logged in.

  2. Click Lock & Edit.

  3. Navigate to SecurityRealms, then the default realm name, and then Providers.

  4. Reorder the OAM Identity Asserter, OID/OVD Authenticator, and Default Authenticator by ensuring that the control flag for each authenticator is set as follows:

    • OAM Identity Asserter: REQUIRED

    • OID LDAP Authenticator (or OVD LDAP Authenticator): SUFFICIENT

    • Default Authenticator: SUFFICIENT

  5. Click OK.

11.4 Validating Access Through Oracle HTTP Server and SSO

Validate single sign-on through both Oracle HTTP Server instances using the following URLs:

Then validate single sign-on through the front-end (using the SSO username and password):

11.5 Backing Up the Installation

After you have verified that the extended domain is working, back up the installation. This is a quick backup for the express purpose of immediate restore in case of problems in the further steps. The backup destination is the local disk. This backup can be discarded once the enterprise deployment setup is complete. At that point, the regular deployment-specific backup and recovery process can be initiated. The Oracle Fusion Middleware Administrator's Guide provides further details. For information on describing the Oracle HTTP Server data that must be backed up and restored, refer to the "Backup and Recovery Recommendations for Oracle HTTP Server" section in this guide. For information on how to recover components, see "Recovery of Components" and "Recovery After Loss of Component" sections in the guide. For recommendations specific to recovering from the loss of a host, see the "Recovering Oracle HTTP Server to a Different Host" in the guide. Also refer to the Oracle Database Backup and Recovery User's Guide for information on database backup.

Perform these steps to back up the installation at this point:

  1. Back up the web tier:

    1. Shut down the instance using opmnctl.

      ORACLE_BASE/admin/instance_name/bin/opmnctl stopall
      
    2. Back up the Middleware Home on the web tier using the following command (as root):

      tar -cvpf BACKUP_LOCATION/web.tar $MW_HOME
      
    3. Back up the Instance Home on the web tier using the following command (as root):

      tar -cvpf BACKUP_LOCATION/web_instance.tar $ORACLE_INSTANCE
      
    4. Start the instance using opmnctl:

      ORACLE_BASE/admin/instance_name/bin/opmnctl startall
      
  2. Back up the AdminServer domain directory. Perform a backup to save your domain configuration. The configuration files all exist under the ORACLE_BASE/ admin/domain_name directory.

    SOAHOST1> tar -cvpf edgdomainback.tar ORACLE_BASE/admin/domain_name