There are two approaches to interacting with the SP:
Oracle ILOM CLI shell (default) – The Oracle ILOM shell provides access to Oracle ILOM's features and functions through a CLI.
Oracle ILOM browser interface – The Oracle ILOM web interface supports the same set of features and functions as the shell.
Note - Unless indicated otherwise, all examples of interaction with the SP are depicted with Oracle ILOM shell commands.
Note - The CLI includes a feature that enables you to access Oracle Solaris Fault Manager commands, such as fmadm, fmdump, and fmstat, from within the Oracle ILOM shell. This feature is referred to as the Oracle ILOM faultmgmt shell. For more information about the Oracle Solaris Fault Manager commands, see the SPARC T4-1 administration documentation and the Oracle Solaris documentation.
You can log into multiple SP accounts simultaneously and have separate Oracle ILOM shell commands executing concurrently under each account.
Set up your terminal device for 9600 baud, 8 bit, no parity, 1 stop bit and no handshaking. Use a null-modem configuration (transmit and receive signals crossed over to enable DTE-to-DTE communication). The crossover adapters supplied with the server provide a null-modem configuration.
The Oracle ILOM default username is root, and the default password is changeme.
% ssh firstname.lastname@example.org ... Are you sure you want to continue connecting (yes/no) ? yes ... Password: password (nothing displayed) Oracle(R) Integrated Lights Out Manager Version 3.0.12.x rxxxxx Copyright (c) 2010 Oracle and/or its affiliates. All rights reserved. ->
Note - To provide optimum server security, change the default server password.
The Oracle ILOM -> prompt indicates that you are accessing the SP with the Oracle ILOM CLI.
The following Oracle ILOM commands are commonly used for fault management:
Note - You can use fmadm faulty in the faultmgmt shell as an alternative to show faulty. See Check for Faults (fmadm faulty Command)