| Skip Navigation Links | |
| Exit Print View | |
|
Oracle x86 Server Diagnostics, Applications, and Utilities Guide for Servers with Oracle ILOM 3.1 |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle x86 Server Diagnostics, Applications, and Utilities Guide for Servers with Oracle ILOM 3.1 |
Getting the Latest Firmware and Software
Introduction to System Diagnostics
Server Verification and Troubleshooting Scenarios
Preliminary Troubleshooting Procedures
Gather Service Visit Information
Running the U-Boot Diagnostic Tests and Viewing the Results
Run the U-Boot Diagnostic Tests
Sample SP Environmental Variables Showing U-Boot Test Status
Fixing Problems with Oracle ILOM Using the Preboot Menu
Use the edit Command to Configure Preboot Menus
Restoring Oracle ILOM Access to the Serial Console
Recover the SP Firmware Image Using the Preboot Menus
Using Oracle ILOM to Monitor Server Components
Check Component Status Using the Oracle ILOM Web Interface
Check Component Status Using the Oracle ILOM Command-Line Interface
Creating a Data Collector Snapshot
Using SunVTS Diagnostics Software
SunVTS Diagnostic Test Suite Overview
Diagnose Server Problems With the Bootable Diagnostics CD
Performing Pc-Check Diagnostic Tests
Checking System Components with HWdiag
Getting Server Module Firmware and Software
Firmware and Software Access Options
Available Software Release Packages
This section describes how to configure the U-Boot diagnostics test mode and how to read the results.
The U-Boot diagnostic tests the hardware to ensure that enough functionality is present to allow the SP to boot. It runs automatically when the server is started or rebooted.
The topics include:
|
Note - If any test fails, the SP does not boot.
The tested hardware includes:
SP memory
Network devices
I/O devices
I2C devices
USB connections
|