Perform this procedure to make a RAID volume (virtual drive) bootable if you created more than one RAID volume using the BIOS Configuration Utility on a server that has the Sun Storage 6 Gb SAS PCIe RAID Internal HBA (SGX-SAS6-R-INT-Z) installed.
You do not need to perform this procedure if any of the following is true:
You used Oracle System Assistant to create a volume and to make the volume bootable.
Your server has the Sun Storage 6 Gb SAS PCIe Internal HBA (SGX-SAS6-INT-Z) installed.
You only created one virtual drive using the LSI SAS2 BIOS Configuration Utility.
Before You Begin
Before you begin this procedure, create at least one virtual drive, or RAID volume, on the Sun Storage 6 Gb SAS PCIe RAID, Internal HBA (SGX-SAS6-R-INT-Z) using the BIOS Configuration Utility (see Create a RAID Volume in Legacy BIOS Boot Mode Using the BIOS RAID Configuration Utilities ).
For example, to reset the server:
The BIOS screen appears.
The Adapter Selection screen appears.
The LSI MegaRAID BIOS Config Utility Virtual Configuration screen appears.
The Virtual Drives screen appears.
For more information on performing this task, refer to the LSI MegaRAID SAS Software User's Guide located at http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-r-rem-z.aspx.