|Skip Navigation Links|
|Exit Print View|
|System Administration Guide: Basic Administration Oracle Solaris 10 8/11 Information Library|
In this procedure, the print service is disabled.
Roles contain authorizations and privileged commands. For more information about roles, see Configuring RBAC (Task Map) in System Administration Guide: Security Services.
# svcs -xv svc:/application/print/server:default (LP Print Service) State: disabled since Wed 13 Oct 2004 02:20:37 PM PDT Reason: Disabled by an administrator. See: http://sun.com/msg/SMF-8000-05 See: man -M /usr/share/man -s 1M lpsched Impact: 2 services are not running: svc:/application/print/rfc1179:default svc:/application/print/ipp-listener:default
The -x option provides additional information about the service instances that are impacted.
# svcadm enable application/print/server
This procedure shows how to replace a corrupt repository with a default copy of the repository. When the repository daemon, svc.configd, is started, it does an integrity check of the configuration repository. This repository is stored in /etc/svc/repository.db. The repository can become corrupted due to one of the following reasons:
Accidental overwrite of the file
If the integrity check fails, the svc.configd daemon writes a message to the console similar to the following:
svc.configd: smf(5) database integrity check of: /etc/svc/repository.db failed. The database might be damaged or a media error might have prevented it from being verified. Additional information useful to your service provider is in: /etc/svc/volatile/db_errors The system will not be able to boot until you have restored a working database. svc.startd(1M) will provide a sulogin(1M) prompt for recovery purposes. The command: /lib/svc/bin/restore_repository can be run to restore a backup version of your repository. See http://sun.com/msg/SMF-8000-MY for more information.
The svc.startd daemon then exits and starts sulogin to enable you to perform maintenance.
Running this command takes you through the necessary steps to restore a non-corrupt backup. SMF automatically takes backups of the repository at key system moments. For more information see SMF Repository Backups.
When started, the /lib/svc/bin/restore_repository command displays a message similar to the following:
Repository Restore utility See http://sun.com/msg/SMF-8000-MY for more information on the use of this script to restore backup copies of the smf(5) repository. If there are any problems which need human intervention, this script will give instructions and then exit back to your shell. Note that upon full completion of this script, the system will be rebooted using reboot(1M), which will interrupt any active services.
If the system that you are recovering is not a local zone, the script explains how to remount the / and /usr file systems with read and write permissions to recover the databases. The script exits after printing these instructions. Follow the instructions, paying special attention to any errors that might occur.
After the root ( /) file system is mounted with write permissions, or if the system is a local zone, you are prompted to select the repository backup to restore:
The following backups of /etc/svc/repository.db exists, from oldest to newest: ... list of backups ...
Backups are given names, based on type and the time the backup was taken. Backups beginning with boot are completed before the first change is made to the repository after system boot. Backups beginning with manifest_import are completed after svc:/system/manifest-import:default finishes its process. The time of the backup is given in YYYYMMDD_HHMMSS format.
Typically, the most recent backup option is selected.
Please enter one of: 1) boot, for the most recent post-boot backup 2) manifest_import, for the most recent manifest_import backup. 3) a specific backup repository from the above list 4) -seed-, the initial starting repository. (All customizations will be lost.) 5) -quit-, to cancel. Enter response [boot]:
If you press Enter without specifying a backup to restore, the default response, enclosed in  is selected. Selecting -quit- exits the restore_repository script, returning you to your shell prompt.
Note - Selecting -seed- restores the seed repository. This repository is designed for use during initial installation and upgrades. Using the seed repository for recovery purposes should be a last resort.
After the backup to restore has been selected, it is validated and its integrity is checked. If there are any problems, the restore_repository command prints error messages and prompts you for another selection. Once a valid backup is selected, the following information is printed, and you are prompted for final confirmation.
After confirmation, the following steps will be taken: svc.startd(1M) and svc.configd(1M) will be quiesced, if running. /etc/svc/repository.db -- renamed --> /etc/svc/repository.db_old_YYYYMMDD_HHMMSS /etc/svc/volatile/db_errors -- copied --> /etc/svc/repository.db_old_YYYYMMDD_HHMMSS_errors repository_to_restore -- copied --> /etc/svc/repository.db and the system will be rebooted with reboot(1M). Proceed [yes/no]?
The system reboots after the restore_repository command executes all of the listed actions.
If problems with starting services occur, sometimes a system will hang during the boot. This procedure shows how to troubleshoot this problem.
This command instructs the svc.startd daemon to temporarily disable all services and start sulogin on the console.
ok boot -m milestone=none
# svcadm milestone all
When the boot process hangs, determine which services are not running by running svcs -a. Look for error messages in the log files in /var/svc/log.
# svcs -x
This command verifies that the login process on the console will run.
# svcs -l system/console-login:default
Local file systems that are not required to boot the Solaris OS are mounted by the svc:/system/filesystem/local:default service. When any of those file systems are unable to be mounted, the service enters a maintenance state. System startup continues, and any services which do not depend on filesystem/local are started. Services which require filesystem/local to be online before starting through dependencies are not started.
To change the configuration of the system so that a sulogin prompt appears immediately after the service fails instead of allowing system startup to continue, follow the procedure below.
# svccfg -s svc:/system/console-login svc:/system/console-login> addpg site,filesystem-local dependency svc:/system/console-login> setprop site,filesystem-local/entities = fmri: svc:/system/filesystem/local svc:/system/console-login> setprop site,filesystem-local/grouping = astring: require_all svc:/system/console-login> setprop site,filesystem-local/restart_on = astring: none svc:/system/console-login> setprop site,filesystem-local/type = astring: service svc:/system/console-login> end
# svcadm refresh console-login
Example 19-18 Forcing an sulogin Prompt Using Oracle Solaris JumpStart
Save the following commands into a script and save it as /etc/rcS.d/S01site-customfs.
#!/bin/sh # # This script adds a dependency from console-login -> filesystem/local # This forces the system to stop the boot process and drop to an sulogin prompt # if any file system in filesystem/local fails to mount. PATH=/usr/sbin:/usr/bin export PATH svccfg -s svc:/system/console-login << EOF addpg site,filesystem-local dependency setprop site,filesystem-local/entities = fmri: svc:/system/filesystem/local setprop site,filesystem-local/grouping = astring: require_all setprop site,filesystem-local/restart_on = astring: none setprop site,filesystem-local/type = astring: service EOF svcadm refresh svc:/system/console-login [ -f /etc/rcS.d/S01site-customfs ] && rm -f /etc/rcS.d/S01site-customfs
When a failure occurs with the system/filesystem/local:default service, the svcs -vx command should be used to identify the failure. After the failure has been fixed, the following command clears the error state and allows the system boot to continue: svcadm clear filesystem/local.