Installing Over a Wide Area Network (Task Maps)

The following tables list the tasks you need to perform to prepare for a WAN boot installation.

For a list of the tasks you need to perform to prepare for a secure WAN boot installation, see Table 12-1.

For a description of a secure WAN boot installation over HTTPS, see Secure WAN Boot Installation Configuration.
For a list of the tasks you need to perform to prepare for an insecure WAN boot installation, see Table 12-2.

For a description of an insecure WAN boot installation, see Insecure WAN Boot Installation Configuration.

To use a DHCP server or a logging server, complete the optional tasks that are listed at the bottom of each table.

Table 12-1 Task Map: Preparing to Perform a Secure WAN Boot Installation

Task	Description	For Instructions
Decide what security features you want to use in your installation.	Review the security features and configurations to decide what level of security you want to use in your WAN boot installation.	Protecting Data During a WAN Boot Installation Security Configurations Supported by WAN Boot (Overview)
Collect WAN boot installation information.	Complete the worksheet to record all the information you need to perform a WAN boot installation.	Gathering Information for WAN Boot Installations
Create the document root directory on the WAN boot server.	Create the document root directory and any subdirectories to serve the configuration and installation files.	Creating the Document Root Directory
Create the WAN boot miniroot.	Use the `setup_install_server` command to create the WAN boot miniroot.	SPARC: To Create a WAN Boot Miniroot
Verify that the client system supports WAN boot.	Check the client OBP for boot argument support of WAN boot.	To Check the Client OBP for WAN Boot Support
Install the `wanboot` program on the WAN boot server.	Copy the `wanboot` program to the document root directory of the WAN boot server.	Installing the `wanboot` Program on the WAN Boot Server
Install the `wanboot-cgi` program on the WAN boot server.	Copy the `wanboot-cgi` program to the WAN boot server's CGI directory.	To Copy the `wanboot-cgi` Program to the WAN Boot Server
(Optional) Set up the logging server.	Configure a dedicated system for displaying boot and installation log messages.	(Optional) To Configure the WAN Boot Logging Server
Set up the `/etc/netboot` hierarchy.	Populate the `/etc/netboot` hierarchy with the configuration and security files that are required for a WAN boot installation.	Creating the `/etc/netboot` Hierarchy on the WAN Boot Server
Configure the web server to use secure HTTP for a more secure WAN boot installation.	Identify the web server requirements that are necessary to perform a WAN installation with HTTPS.	(Optional) Protecting Data by Using HTTPS
Format digital certificates for a more secure WAN boot installation.	Split PKCS#12 file into a private key and a certificate to use with the WAN installation.	(Optional) To Use Digital Certificates for Server and Client Authentication
Create a hashing key and an encryption key for a more secure WAN boot installation.	Use the `wanbootutil keygen` command to create HMAC SHA1, 3DES, or AES keys.	(Optional) To Create a Hashing Key and an Encryption Key
Create the Flash Archive.	Use the `flarcreate` command to create an archive of the software that you want to install on the client.	To Create the Flash Archive
Create the installation files for the custom JumpStart, a feature of Oracle Solaris, installation.	Use a text editor to create the following files: `sysidcfg` `profile` `rules.ok` `begin scripts` `finish scripts`	To Create the `sysidcfg` File To Create the Profile To Create the `rules` File (Optional) Creating Begin and Finish Scripts
Create the system configuration file.	Set the configuration information in the `system.conf` file.	To Create the System Configuration File
Create the WAN boot configuration file.	Set the configuration information in the `wanboot.conf` file.	To Create the `wanboot.conf` File
(Optional) Configure the DHCP server to support a WAN boot installation.	Set Oracle vendor options and macros in the DHCP server.	Preconfiguring System Configuration Information With the DHCP Service (Tasks)

Table 12-2 Task Map: Preparing to Perform an Insecure WAN Boot Installation

Task	Description	For Instructions
Decide what security features you want to use in your installation.	Review the security features and configurations to decide what level of security you want to use in your WAN boot installation.	Protecting Data During a WAN Boot Installation Security Configurations Supported by WAN Boot (Overview)
Collect WAN boot installation information.	Complete the worksheet to record all the information you need to perform a WAN boot installation.	Gathering Information for WAN Boot Installations
Create the document root directory on the WAN boot server.	Create the document root directory and any subdirectories to serve the configuration and installation files.	Creating the Document Root Directory
Create the WAN boot miniroot.	Use the `setup_install_server` command to create the WAN boot miniroot.	SPARC: To Create a WAN Boot Miniroot
Verify that the client system supports WAN boot.	Check the client OBP for boot argument support of WAN boot.	To Check the Client OBP for WAN Boot Support
Install the `wanboot` program on the WAN boot server.	Copy the `wanboot` program to the document root directory of the WAN boot server.	Installing the `wanboot` Program on the WAN Boot Server
Install the `wanboot-cgi` program on the WAN boot server.	Copy the `wanboot-cgi` program to the WAN boot server's CGI directory.	To Copy the `wanboot-cgi` Program to the WAN Boot Server
(Optional) Set up the logging server.	Configure a dedicated system for displaying boot and installation log messages.	(Optional) To Configure the WAN Boot Logging Server
Set up the `/etc/netboot` hierarchy.	Populate the `/etc/netboot` hierarchy with the configuration and security files that are required for a WAN boot installation.	Creating the `/etc/netboot` Hierarchy on the WAN Boot Server
(Optional) Create a hashing key.	Use the `wanbootutil keygen` command to create HMAC SHA1 key. For insecure installations that check data integrity, complete this task to create an HMAC SHA1 hashing key.	(Optional) To Create a Hashing Key and an Encryption Key
Create the Flash Archive.	Use the `flarcreate` command to create an archive of the software that you want to install on the client.	To Create the Flash Archive
Create the installation files for the custom JumpStart installation.	Use a text editor to create the following files: `sysidcfg` profile `rules.ok` begin scripts finish scripts	To Create the `sysidcfg` File To Create the Profile To Create the `rules` File (Optional) Creating Begin and Finish Scripts
Create the system configuration file.	Set the configuration information in the `system.conf` file.	To Create the System Configuration File
Create the WAN boot configuration file.	Set the configuration information in the `wanboot.conf` file.	To Create the `wanboot.conf` File
(Optional) Configure the DHCP server to support a WAN boot installation.	Set Oracle vendor options and macros in the DHCP server.	Preconfiguring System Configuration Information With the DHCP Service (Tasks)

Skip Navigation Links
Exit Print View
	Oracle Solaris 10 8/11 Installation Guide: Network-Based Installations Oracle Solaris 10 8/11 Information Library