|
|
|
|
minus
sign (-) |
Anything. The any keyword always succeeds. |
|
processor_typeValid
values for processor_type are the following:
|
A system's processor type. The uname -p command reports
the system's processor type. |
|
actual_disk_name size_rangeactual_disk_name – A disk name in
the form cxtydz, such as c0t3d0 or c0d0, or the special word rootdisk.
If rootdisk is used, the disk to be matched is determined in the
following order:
SPARC: The disk that contains the preinstalled boot image, which is a new SPARC based system with factory JumpStart, a feature of Oracle Solaris, installed
The c0t3d0s0 disk, if the disk exists
The first available disk that is searched in kernel probe order
size_range – The size of the disk, which must be specified as
a range of Mbytes (x-x).
Note - When calculating size_range, remember that a MB equals 1,048,576
bytes. A disk might be advertised as a “535–MB” disk, but the disk
might contain only 510 million bytes of disk space. The JumpStart program views
the “535–MB” disk as a 510–MB disk because 535,000,000 / 1,048,576 = 510.
A “535–MB” disk does not match a size_range equal to 530–550.
|
The name and
size of a system's disk in MB. Example: disksize c0t3d0 250-300 In the example, the JumpStart
program attempts to match a system disk that is named c0t3d0. The disk
can hold between 250 and 300 MB of information. Example: disksize rootdisk 750-1000 In the example, the
JumpStart program attempts to match a disk in the following order:
A system disk that contains a preinstalled boot image
The c0t3d0s0 disk, if the disk exists
The first available disk that can hold between 750 MB and 1 GB of information
|
|
actual_domain_name |
A system's domain name, which controls how a naming service determines information. If
you have a system already installed, the domainname command reports the system's domain
name. |
|
actual_IP_address |
A system's IP address. |
|
actual_host_name |
A system's host
name. If you have a system that is already installed, the uname -n
command reports the system's host name. |
|
slice versionslice –
A disk slice name in the form cwtxdysz, such as c0t3d0s5, or the
special words any or rootdisk. If any is used, the JumpStart program attempts
to match all of the system's disks in kernel probe order. If
rootdisk is used, the disk to be matched is determined in the
following order:
SPARC: The disk that contains the preinstalled boot image, which is a new SPARC based system with factory JumpStart installed
The c0t3d0s0 disk, if the disk exists
The first available disk that is searched in kernel probe order
version – A version name or the special words any or upgrade. If
any is used, any Oracle Solaris release is matched. If upgrade is used, any
Oracle Solaris release that is supported and can be upgraded is matched. If the
JumpStart program finds a Oracle Solaris release but is unable to determine the
version, the version that is returned is SystemV. |
A disk that has a
root ( /) file system that corresponds to a particular version of Oracle Solaris
software. Example: installed c0t3d0s1 Solaris 10 In the example, the JumpStart program attempts to match a system
that has a Oracle Solaris root (/) file system on c0t3d0s1. |
|
|
A system's platform group. If you
have a system that is already installed, the arch -k command or the uname -m
command reports the system's platform group. |
|
physical_memThe value must
be a range of MB, x-x, or a single MB value. |
A system's
physical memory size in MB. Example: memsize 64-128 The example tries to match a system
with a physical memory size between 64 and 128 MB. If you have a
system that is already installed, the output of the prtconf command, line
2, reports the system's physical memory size. |
|
actual_platform_name |
A system's
platform name. See the Oracle Solaris Sun Hardware Platform Guide at http://www.oracle.com/technetwork/indexes/documentation/index.html for a list of valid
platform names. To find the platform name of an installed system, use the
uname -i command or the output of the prtconf command, line 5.
Note - If the actual_platform_name
contains spaces, you must replace spaces with underscores (_). Example: SUNW, Sun_4_50
|
|
network_num |
A system's network number, which the JumpStart program determines by performing a
logical AND between the system's IP address and the subnet mask. Example:
network 192.168.2.0 The example tries to match a system with a 192.168.2.8 IP address,
if the subnet mask is 255.255.255.0. |
|
Solaris_x |
A version of
Oracle Solaris software that is already installed on a system. Example: osname Solaris 10 In
the example, the JumpStart program attempts to match a system with the Oracle
Solaris 10 8/11 OS already installed. |
|
probe_keyword |
A valid probe keyword or a
valid custom probe keyword. Example: probe disks The example returns the size of a system's
disks in MB and in kernel probe order, for example, c0t3d0s1, c0t4d0s0, on a
SPARC based system. The JumpStart program sets the SI_DISKLIST, SI_DISKSIZES, SI_NUMDISKS, and
SI_TOTALDISK environment variables.
Note - The probe keyword is unique in that the keyword does not attempt
to match an attribute and run a profile. The probe keyword returns a
value. Consequently, you cannot specify begin scripts, profiles, and finish scripts with the
probe rule keyword.
Probe keywords are described in Chapter 5, Creating Custom Rule and Probe Keywords (Tasks). |
|
size_rangeThe
value must be specified as a range of MB (x-x).
Note - When calculating size_range,
remember that one MB equals 1,048,576 bytes. A disk might be advertised as
a “535–MB” disk, but the disk might have only 510 million bytes of
disk space. The JumpStart program views the “535–MB” disk as a 510–MB disk
because 535,000,000 / 1,048,576 = 510. A “535–MB” disk does not match a size_range
equal to 530–550.
|
The total disk space on a system in MB. The
total disk space includes all the operational disks that are attached to a
system. Example: totaldisk 300-500 In the example, the JumpStart program tries to match a system
with a total disk space between 300 and 500 MB. |