JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris Administration: Network Services     Oracle Solaris 11 Information Library
search filter icon
search icon

Document Information


Part I Network Services Topics

1.  Network Service (Overview)

2.  Managing Web Cache Servers

3.  Time-Related Services

Part II Accessing Network File Systems Topics

4.  Managing Network File Systems (Overview)

5.  Network File System Administration (Tasks)

6.  Accessing Network File Systems (Reference)

Part III SLP Topics

7.  SLP (Overview)

8.  Planning and Enabling SLP (Tasks)

9.  Administering SLP (Tasks)

10.  Incorporating Legacy Services

11.  SLP (Reference)

Part IV Mail Services Topics

12.  Mail Services (Overview)

13.  Mail Services (Tasks)

14.  Mail Services (Reference)

Part V Serial Networking Topics

15.  Solaris PPP 4.0 (Overview)

16.  Planning for the PPP Link (Tasks)

17.  Setting Up a Dial-up PPP Link (Tasks)

18.  Setting Up a Leased-Line PPP Link (Tasks)

Setting Up a Leased Line (Task Map)

Configuring Synchronous Devices on the Leased Line

Prerequisites for Synchronous Devices Setup

How to Configure Synchronous Devices

Configuring a Machine on the Leased Line

Prerequisites for Configuring the Local Machine on a Leased Line

How to Configure a Machine on a Leased Line

19.  Setting Up PPP Authentication (Tasks)

20.  Setting Up a PPPoE Tunnel (Tasks)

21.  Fixing Common PPP Problems (Tasks)

22.  Solaris PPP 4.0 (Reference)

23.  Migrating From Asynchronous Solaris PPP to Solaris PPP 4.0 (Tasks)

24.  UUCP (Overview)

25.  Administering UUCP (Tasks)

26.  UUCP (Reference)

Part VI Working With Remote Systems Topics

27.  Working With Remote Systems (Overview)

28.  Administering the FTP Server (Tasks)

29.  Accessing Remote Systems (Tasks)

Part VII Monitoring Network Services Topics

30.  Monitoring Network Performance (Tasks)



Setting Up a Leased Line (Task Map)

Leased-line links are relatively easy to set up, in comparison with dial-up links. In most instances, you do not have to configure the CSU/DSU, dialing services, or authentication. If you do need to configure the CSU/DSU, refer to the manufacturer's documentation for aid with this complex task.

The task map in the next table describes all the tasks that are involved in setting up the basic leased-line link.

Note - Some types of leased lines do require the CSU/DSU to “dial” the address of the opposite peer. For example, Frame Relay uses Switched Virtual Circuits (SVCs) or Switched 56 service.

Table 18-1 Task Map for Setting Up the Leased-Line Link

For Instructions
1. Gather pre-configuration information
Gather data that is needed prior to setting up the link.
2. Set up the leased-line hardware
Assemble the CSU/DSU and synchronous interface card.
3. Configure the interface card, if required
Configure the interface script to be used when the leased line is initiated.
4. Configure information about the remote peer
Define how communications between your local machine and the remote peer should work.
5. Start up the leased line
Configure your machine to start up PPP over the leased line as part of the booting process.