Skip Navigation Links | |
Exit Print View | |
Oracle Solaris Administration: Devices and File Systems Oracle Solaris 11 Information Library |
1. Managing Removable Media (Overview)
2. Managing Removable Media (Tasks)
3. Accessing Removable Media (Tasks)
4. Writing CDs and DVDs (Tasks)
5. Managing Devices (Overview/Tasks)
6. Dynamically Configuring Devices (Tasks)
7. Using USB Devices (Overview)
9. Using InfiniBand Devices (Overview/Tasks)
11. Administering Disks (Tasks)
12. SPARC: Setting Up Disks (Tasks)
13. x86: Setting Up Disks (Tasks)
14. Configuring Storage Devices With COMSTAR
COMSTAR and iSCSI Technology (Overview)
COMSTAR Software and Hardware Requirements
Configuring COMSTAR (Task Map)
Configuring Dynamic or Static Target Discovery
Configuring iSCSI Devices With COMSTAR
How to Enable the STMF Service
How to Back Up and Restore a COMSTAR Configuration
How to Create the iSCSI Target
How to Configure an IB HCA for iSER
How to Configure an iSCSI Initiator
How to Remove Discovered iSCSI Targets
Creating iSCSI Target Portal Groups
How to Create a Target Portal Group for iSCSI Targets
Making SCSI Logical Units Available
How to Make a Logical Unit Available to All Systems
How to Restrict LUN Access to Selected Systems
Configuring Fibre Channel Devices With COMSTAR
Configuring Fibre Channel Ports For COMSTAR
How to Display Existing FC Port Bindings
How to Set All FC Ports to a Specific Mode
How to Set Selected FC Ports to Initiator or Target Mode
Making Logical Units Available for FC and FCoE
How to Make Logical Units Available for FC and FCoE
Configuring FCoE Devices With COMSTAR
Enabling 802.3x PAUSE and Jumbo Frames on the Ethernet Interface
How to Create FCoE Target Ports
How to Verify That an FCoE Target Port Is Working
How to Delete FCoE Target Ports
Configuring SRP Devices With COMSTAR
How to Enable the SRP Target Service
How to Verify SRP Target Status
Configuring Authentication in Your iSCSI-Based Storage Network
How to Configure CHAP Authentication for Your iSCSI Initiator
How to Configure CHAP Authentication for Your iSCSI Target
Using a Third-Party RADIUS Server to Simplify CHAP Management in Your iSCSI Configuration
How to Configure a RADIUS Server for Your iSCSI Target
How to Configure a RADIUS Server for Your iSCSI Initiator
Oracle Solaris iSCSI and RADIUS Server Error Messages
Setting Up iSCSI Multipathed Devices in Oracle Solaris
How to Enable Multiple iSCSI Sessions for a Target
Modifying iSCSI Initiator and Target Parameters
How to Modify iSCSI Initiator and Target Parameters
Troubleshooting iSCSI Configuration Problems
No Connections to the iSCSI Target From the Local System
How to Troubleshoot iSCSI Connection Problems
iSCSI Device or Disk Is Not Available on the Local System
How to Troubleshoot iSCSI Device or Disk Unavailability
Use LUN Masking When Using the iSNS Discovery Method
15. Configuring and Managing the Oracle Solaris Internet Storage Name Service (iSNS)
16. The format Utility (Reference)
17. Managing File Systems (Overview)
18. Creating and Mounting File Systems (Tasks)
19. Configuring Additional Swap Space (Tasks)
20. Copying Files and File Systems (Tasks)
You can display information about the iSCSI initiator and target devices by using the iscsiadm list command.
For example:
# iscsiadm list initiator-node Initiator node name: iqn.1986-03.com.sun:01:0003ba4d233b.425c293c Initiator node alias: zzr1200 Login Parameters (Default/Configured): Header Digest: NONE/- Data Digest: NONE/- Authentication Type: NONE RADIUS Server: NONE RADIUS access: unknown Configured Sessions: 1
For example:
# iscsiadm list discovery Discovery: Static: enabled Send Targets: enabled iSNS: enabled
Example 14-1 Displaying iSCSI Target Information
The following example shows how to display the parameter values for a specific iSCSI target:
# iscsiadm list target-param iqn.1992-08.com.abcstorage:sn.33592219 Target: iqn.1992-08.com.abcstorage:sn.33592219
The iscsiadm list target-param -v command displays the following information:
The authentication values for the target
The default values for the target login parameters
The configured value for each login parameter
The iscsiadm list target-param -v command displays the default parameter value before the / designator and the configured parameter value after the / designator. If you have not configured a parameter, its value displays as a hyphen (-). For more information, see the following examples.
# iscsiadm list target-param -v eui.50060e8004275511 Target: eui.50060e8004275511 Alias: - Bi-directional Authentication: disabled Authentication Type: NONE Login Parameters (Default/Configured): Data Sequence In Order: yes/- Data PDU In Order: yes/- Default Time To Retain: 20/- Default Time To Wait: 2/- Error Recovery Level: 0/- First Burst Length: 65536/- Immediate Data: yes/- Initial Ready To Transfer (R2T): yes/- Max Burst Length: 262144/- Max Outstanding R2T: 1/- Max Receive Data Segment Length: 65536/- Max Connections: 1/- Header Digest: NONE/- Data Digest: NONE/- Configured Sessions: 1
The following example output displays the parameters that were negotiated between the target and the initiator:
# iscsiadm list target -v eui.50060e8004275511 Target: eui.50060e8004275511 TPGT: 1 ISID: 4000002a0000 Connections: 1 CID: 0 IP address (Local): 172.90.101.71:32813 IP address (Peer): 172.90.101.40:3260 Discovery Method: Static Login Parameters (Negotiated): Data Sequence In Order: yes Data PDU In Order: yes Default Time To Retain: 0 Default Time To Wait: 3 Error Recovery Level: 0 First Burst Length: 65536 Immediate Data: yes Initial Ready To Transfer (R2T): yes Max Burst Length: 262144 Max Outstanding R2T: 1 Max Receive Data Segment Length: 65536 Max Connections: 1 Header Digest: NONE Data Digest: NONE