How to Manually Configure an FC Device Without Multipathing

This sample procedure describes how to configure a fabric device that is attached to the fabric-connected host port c0.

1. Become an administrator.
2. Identify the device to be configured.

   # cfgadm -al
   Ap_Id                 Type     Receptacle   Occupant     Condition
   c0                  fc-fabric  connected    unconfigured unknown
   c0::50020f2300006077 disk      connected    unconfigured unknown
   c0::50020f23000063a9 disk      connected    unconfigured unknown
   c0::50020f2300005f24 disk      connected    unconfigured unknown
   c0::50020f2300006107 disk      connected    unconfigured unknown
   c1                  fc-private connected    configured   unknown
   c1::220203708b69c32b disk      connected    configured   unknown
   c1::220203708ba7d832 disk      connected    configured   unknown
   c1::220203708b8d45f2 disk      connected    configured   unknown
   c1::220203708b9b20b2 disk      connected    configured   unknown

3. Configure the fabric device.

   # cfgadm -c configure c0::50020f2300006077

4. Verify that the selected fabric device is configured.

   # cfgadm -al
   Ap_Id                 Type      Receptacle  Occupant     Condition
   c0                   fc-fabric  connected   configured   unknown
   c0::50020f2300006077 disk       connected   configured   unknown
   c0::50020f23000063a9 disk       connected   unconfigured unknown
   c0::50020f2300005f24 disk       connected   unconfigured unknown
   c0::50020f2300006107 disk       connected   unconfigured unknown
   c1                   fc-private connected   configured   unknown
   c1::220203708b69c32b disk       connected   configured   unknown
   c1::220203708ba7d832 disk       connected   configured   unknown
   c1::220203708b8d45f2 disk       connected   configured   unknown
   c1::220203708b9b20b2 disk       connected   configured   unknown

   Notice that the Occupant column for both c0 and c0::50020f2300006077 displays as configured, indicating that the c0 port has a configured occupant and that the c0::50020f2300006077 device is configured.

5. Display FCP SCSI LUN information for multi-LUN SCSI devices.

   The following code example shows that the physical devices connected through Ap_Id c0:50020f2300006077 have four LUNs configured.

   # cfgadm -al -o show_SCSI_LUN c0
   Ap_Id                 Type       Receptacle   Occupant     Condition
   c0                  fc-fabric    connected    configured   unknown
   c0::50020f2300006077,0 disk      connected    configured   unknown
   c0::50020f2300006077,1 disk      connected    configured   unknown
   c0::50020f2300006077,2 disk      connected    configured   unknown
   c0::50020f2300006077,3 disk      connected    configured   unknown

   The device is now available on the system running the Oracle Solaris OS. The paths represent each SCSI LUN in the physical device represented by c0::50020f2300006077.