Skip Headers
Oracle® WebCenter Content Administrator's Guide for Imaging
11g Release 1 (11.1.1)

Part Number E12782-05
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

3 Changing Configuration Settings

Imaging runs within Oracle WebLogic Server and connects to one or more Content Server repositories. This section describes the configuration options available to an Imaging administrator and how they are accessed.

This section contains the following topics:

3.1 Configuration Overview

Imaging configuration is done in one of the following ways:

3.2 Post-Installation Configuration

If this is an initial installation of Imaging and WebCenter Content in the same Oracle WebLogic Server domain, you must do the following before logging in to Imaging:

  1. Log in to Content Server

  2. Accept the Content Server configuration

  3. Restart Content Server.

Once Content Server is configured and ready, the first user who logs in to Imaging is granted security rights to complete the following post-installation configuration steps:

These steps and the full installation procedure are documented in the Oracle WebCenter Content Installation Guide.

3.3 Configuration of Repository Options

Imaging uses the functionality of the Content Server to store and retrieve documents. Documents are stored and secured based on criteria specified in the application into which they were uploaded. You must create a connection for Imaging to recognize the repository you are using. For more information about creating a connection, see Section 7, "Managing Connections."

Configuring repository options, such as defining the maximum number of search results returned or if the full-text of a document can be indexed, must be done through the Content Server repository. It is recommended that you make all necessary repository configuration prior to defining any application, input, search, or connection objects in Imaging. For more information, see the Oracle WebCenter Content System Administrator's Guide for Content Server.

3.3.1 Storage Management

Content Server uses file store providers to determine where and on what type of media content is stored. Note that the default storage provider configured when Content Server is installed is not intended for a production environment and is not adequate for large numbers of ingested documents. The default can be used for demonstration systems of less than 10,000 documents, but production systems require more advanced configurations. File store providers are configured in Content Server independent of Imaging. For more information, see Section 3.3.4, "Content Server File Store Provider Rules" and the Oracle WebCenter Content System Administrator's Guide for Content Server.

When integrated with Oracle URM, Content Server has the option to move documents from one media to another based on time, and documents can be deleted based on lifecycle. If Imaging is not integrated with Oracle URM and you need to move content to a different file store or delete documents and all revisions, you must do so explicitly using the Content Server Archiver or the Content Server Repository Manager tool.

For more information about configuration options provided by Imaging on the Storage Policy page, see Section A.29, "Application Storage Policy Page." For more information on retention management using Oracle URM, see Oracle WebCenter Content Setup Guide for Records.

3.3.2 Repository Capacity

An Content Server repository can get full to the point of reducing its operating efficiency at which time it will not accept any new Imaging applications. However, you may continue to upload documents to existing applications in that repository.

An Content Server repository is considered full if any of the following are true:

  • The number of security groups exceeds the value of the environment variable IpmMaxGroupLimit.

  • The number of roles assigned permission to security groups exceeds the value of the environment variable IpmMaxGroupRoleLimit.

  • The number of metadata fields exceeds the value of the environment variable IpmMaxMetadataFields.

  • The Content Server configuration setting IpmRepositoryForceFull=True

    Setting IpmRepositoryForceFull equal to True allows you to configure Content Server to identify itself as full to Imaging in order to prevent additional applications from being created. This does not prevent documents from being uploaded.

To get additional space for applications, do one of the following:

  • Install an additional Content Server repository as a master, or set it as a proxy to the main Content Server. For information on how to configure a master or proxy server, see the Oracle WebCenter Content System Administrator's Guide for Content Server.

  • Increase the values of the IpmMaxGroupRoleLimit environment variable (maximum number of security group versus security group role mappings that have privileges assigned before a Content Server is considered full) and IpmMaxMetadataFields environment variable (maximum number of metadata fields before a Content Server is considered full) by editing the config.cfg file directly or by using the Content Server administrative server. The default value for both of these variables is 500. For more information about changing Content Server environment variables, see the Oracle WebCenter Content System Administrator's Guide for Content Server.

3.3.3 Storage Media

Content Server defines where and how it stores content using file store providers, which are configured in Content Server and can be a combination of any media supported by Content Server. Because document storage location is not defined by the media being used for storage, the term volume is used to represent a storage location when defining an application in the Imaging user interface. Note that Imaging cannot be used to create or define a volume. It only connects to one defined and configured by a Content Server administrator from within Content Server.

3.3.4 Content Server File Store Provider Rules

File Store Provider functionality within Content Server allows you to have more control over how and where files are stored and managed within Content Server. For example, typically you would only be able to store all content on a single file system in the vault and weblayout directories. However, using FileStoreProvider, you have the ability to store content across multiple file systems, while also being able to store content within a database.

3.3.4.1 Disabling the Repository Weblayout Directory

Content Server traditionally uses a weblayout directory on a file system to store content in a format for viewing in a web browser, even though the main storage volume may be set up in a database. This can allow for faster retrieval of content when Content Server is being used to manage a web site, or can be used to store a secondary file used to describe the primary content item, but it doesn't have much use in an Imaging solution. Retaining a web layout directory for an exclusively Imaging solution would copy files to a web layout directory that would never get used, taking up unnecessary storage space. It is recommended that any file store provider configured for use as an Imaging volume should have the weblayout functionality disabled. For information about disabling the weblayout directory, or about FileStoreProvider in general, see the Oracle WebCenter Content System Administrator's Guide for Content Server.

3.3.5 Additional Content Server Components

Imaging uses Content Server components to provide compatibility and additional options. Ensure that they are installed and enabled.

3.3.5.1 Required Components

The following component is required to be installed and enabled to ensure compatibility with Content Server:

  • IpmRepository: Sets global profile rules to support document profiles specific to Imaging applications, for compatibility with other products supported by Content Server, including:

    • Content Server Folders

    • Oracle Universal Records Manager (URM)

    • Oracle Information Rights Management (IRM)

3.3.5.2 Optional Components

The following components provide useful functionality that can be leveraged by Imaging:

  • OracleTextSearch: Provides full-text indexing capability.

  • ContentTracker: Provides audit capability for content access.

  • Folders: Provides integration with LDAP and would allow Imaging to be configured to automatically add documents to specific folders.

3.4 Exporting and Importing Definitions

When deploying an Imaging solution, you must define applications, searches, inputs, and connections. Applications are the core of Imaging. An application is a type of management container for documents, defining a metadata set, storage information, and security for all documents within it. Searches enable a user to quickly retrieve a document they need, and an input definition is used to map information from an input file to the metadata fields defined in an application. Applications, searches, inputs, and connections are defined using the Imaging user interface.

You can reuse the application, search, and input definitions by exporting the desired definition to an XML file format. You can then import that definition file into other systems to make those same items available there. For example, if you created an Invoices application for Accounts Receivable and now want to create a similar application for Accounts Payable, you can start with the imported application definition and then modify it as necessary in the Imaging user interface.

Note that when exporting an application, you can explicitly export it by selecting the application and following the procedure detailed in Section 3.4.1, "Exporting Definitions." However, you can also implicitly export application definitions by selecting a search or input that references the application and following the export procedure. Explicitly exported application definitions can modify existing application definitions if you specify them to do so. Implicitly exported application definitions cannot modify existing definitions.

3.4.1 Exporting Definitions

To export a definition file, do the following:

  1. Under Tools in the navigator pane, select Export Definitions. The Export Definitions: Export Comments Page page displays.

  2. Enter any comments about the exported definitions, such as the need for exporting, and click Next. The Export Definitions: Applications Page is displayed.

  3. Enable any application definitions needed for export.

  4. Click Next. The Export Definitions: Searches Page is displayed.

  5. Enable any search definitions needed for export.

  6. Click Next. The Export Definitions: Inputs Page.

  7. Enable any input definitions needed for export.

  8. Click Next. The Export Definitions: Summary Page is displayed.

  9. Review the information on the summary page and ensure it is accurate. Use the navigation train to go back and make any changes. When satisfied, click Create Export File.

3.4.2 Importing Definitions

After you have created a definition file, complete the following steps to import it:

  1. Under Tools in the navigator pane, click Import Definitions. The Import Definitions: File Location Page displays.

  2. Enter the path or click Browse to navigate to the definition file that contains the exported definitions you want to import and click Next. The Import Definitions: Select Imports Page displays.

    Note:

    If using your keyboard rather than your mouse to select the Browse button, tab to the Browse button and then use the Space bar to execute the Browse button function and open the dialog box. The Enter key does not execute the Browse button function.

  3. Select the action for each application, input and search definition to be imported. Options are:

    • Overwrite: the imported definition overwrites the current definition

    • Add: the imported definition is added to the system

    Note:

    Remember that implicitly exported application definitions cannot overwrite existing definitions. Implicitly exported application definitions are those applications that were not explicitly selected for export, but are referenced by a search or input definition that was selected.

    If more than one repository is available, select the repository to be used with the imported definition. Click Next. The Import Definitions: Validate Imports Page displays.

  4. Select your decisions about whether to change the Security, Document Security, Storage Policy, Workflow, and Full-Text Option settings of the imported definitions. Click Submit. The Import Summary page displays.

  5. Review the information on the summary page and ensure it is accurate. Use the navigation train to go back and make any changes. When satisfied, click Close.

3.5 File Size Limits

File size limitations are primarily a factor when retrieving a document for viewing. System architecture, hardware limitations, network load and other factors can influence document retrieval times and cause the viewer to time out. Imaging has been optimized to store tiff image files of sizes to 200KB. If the documents you need to upload and view are larger than to 200KB, test the performance of with those files in the specific network architecture you are planning to use while simulating peak network load.

3.6 Configuring MBeans

Java Management Beans, called MBeans, are part of the greater Java Management eXtensions (JMX) standard which defines ways for administration applications to configure and control Java applications externally. At installation, Imaging registers its MBeans with the hosting application server's MBean server. This allows other applications to interact with Imaging's configuration data. This includes WebLogic Scripting Tools (WLST) and Oracle Enterprise Manager MBean browser.

3.6.1 Imaging MBeans

The following table describes MBeans specific to Imaging.

MBean Description

CacheAgeLimit

Render page-cache timeout duration (used to set the JOC IdleTime). Takes effect at server restart.

Value limits: Cache idle time in minutes

Default: 60 minutes

CacheLocation

Render page-cache temp file location. Takes effect at server restart.

Value limits: Value is used as third parameter to File.createTempFile; a valid system file path spec.

Default: If value is not supplied, system temp location is used.

CheckInterval

Configures how often (in minutes) input agent checks for work. Takes effect on the next check cycle.

Value limits: Min=1, Max=60

Default: 15 minutes

CleanupExpireDays

Sets the number of days after which images are deleted. Acceptable values are 0 through 30. The default is 0, which disables purging of the images directory. Modification requires a server restart.

CleanupFileExclusionList

String value specifies a list of file names excluded from being purged. This allows files to be reused in filings like annotations, without being deleted after filing.

Specified file names must be exact, without wildcards. Entered values are concatenated into a single semicolon delimited string that must not exceed 250 characters, including delimiters. Modification requires a server restart.

DefaultColorSet

Name of default skin used by UI if user has not set a preference. If blank, the default is blafplus-rich. String values that are skin names found in the UI are valid. Takes effect on next login.

Value limits: Any valid skin names on the install.

Default: blafplus-rich

DefaultSecurityGroup

The default security group to use for document security when creating an application. If blank the user must specify the group during application creation. Takes effect on next application creation.

Value limits: Any valid security group name.

Default: None (empty string)

DocumentFileTimeout

The timeout in mSec. for any repository operations like create/update/move document. Used as a timeout for requests to repository. This is effectively the timeout period for requests made through RIDC to UCM.

Value limits: Min = 0, Max = Integer.MAX_VALUE

Default: 2000000

GDFontPath

Path referencing a location containing TTF font files for use by OIT rendering package. Takes effect on session bean initialization.

Value limits: This value is specifically for LINUX and is ignored on Windows systems. It is an Oracle Outside In Technology requirement.

Default: No default provided - this must be explicitly defined.

ImagingTenantId

The unique tenant identifier of the Imaging system.

Note: This and the associated ImagingTenantName should only be set in a Fusion Application multi-tenant environment.

The Imaging server must be restarted after setting.

ImagingTenantName

The unique tenant name of the Imaging system.

Note: This and the associated ImagingTenantId should only be set in a Fusion Application multi-tenant environment.

The Imaging server must be restarted after setting.

InputAgentRetryCount

Controls how many times a job can be retried. The default is 3; on the 4th try the job is placed in the failed directory.

Default: 3

InputDirectories

Provides list of directories stored as CSV strings where input sources should look for work. Takes effect immediately.

Value limits: Any valid directory path the server can access with a minimum of 1 entry and maximum of 10.

Default: IPM/InputAgent/Input

IPMVersion

String file of the Imaging version number.

JpegImageQuality

Specifies desired quality level of rendered JPG images. A lower value results in a more compressed document that facilitates faster load times, but reduces the visual quality of the image. Takes effect each image rendering.

Value limits: Value in range 0-100

Default: 100

LogDetailedTimes

Provides detailed logging of UI activity with durations of many of the UI activities. Takes effect at server restart. Turn on LogDetailedTimes only when you are experiencing long delays with the UI because it floods the log with entries which you generally only need to identify slowdowns.

Value limits: True - Turns on the logging; False - Turns off the logging

Default: False

MaximumDocuments

Sets the upper limit on the maximum number of documents displayed in a single viewer window.

Value limits: Any positive integer.

Default: 25

MaxSearchResults

Maximum number of rows a search is allowed to return. After this value is reached, the search is stopped. Takes effect on next search.

Value limits: Min = 1, Max = 10000

Default: 100

PolicyStoreProvider

This is a non-configurable read-only MBean that displays the type of security being used for the policy store.

Value limits: Allowable values are Internal, OPSS (DB) and OPSS (LDAP)

Default: value of security used for policy store

PreferredDPI

Sets the preferred dots per inch (DPI) of a document when converted to TIFF.

Value limits: 0 (the default value of the transformation platform used to convert the document), 75, 96, 120, 144, 192, 300

Default: 0

RequireBasicAuthSSL

Forces the use of SSL in all web service communication when set to true. Note that the RequireBasicAuthSSL setting only applies when no HTTP Basic Authentication is in use because no OWSM security policies have been applied.

Default: False.

SampleDirectory

Specifies which directory holds the sample data for the input UI. Takes effect immediately.

Value limits: Any valid directory path to which the server has access.

Default: IPM/InputAgent/Input/Samples

TiffCompressionType

Compression algorithm used when creating TIFF images. Takes effect each time a TIFF is generated.

Value limits: Allowable values are LZW and FAX4

Default: LZW

Uptime

Returns the duration the I/PM server has been running since the last startup. The value is returned in the format: HH:MM:SS. This is a read-only MBean.

UseAdvancedAsDefaultViewerMode

Causes the advanced viewer to be used as the default viewer mode if a user has not set a preference. Takes effect at next login.

Value limits: True - Makes the advanced viewer the default; False - Makes the basic viewer the default

Default: False


3.6.2 Using WLST to Change MBeans

WebLogic Server Scripting Tool (WLST) is a command line scripting environment that you can use to create, manage, and monitor Oracle WebLogic Server domains including Imaging MBeans. For a list of custom Imaging MBeans, see Section 3.6.1, "Imaging MBeans." WLST commands are issued on a command line and provide a way to navigate through Oracle WebLogic Server domains into MBean servers and down to specific application MBeans. From there, you can change Imaging MBean settings. To view or change these settings, you can use the WebLogic Server Scripting Tool (WLST) provided with Oracle WebLogic Server. To learn more about the WLST commands and command line protocol, see Oracle Fusion Middleware Administrator's Guide.

Figure 3-1 WebLogic Scripting Tool Use Within Imaging Architecture

Surrounding text describes Figure 3-1 .

Note that:

  • Strings must be surrounded by single quotation marks (')

  • Boolean must be entered as: Boolean(true) or Boolean(false)

  • MBean settings are case-sensitive

  • Long must be entered as: Long(123456)

The following procedure describes how to use WLST to view Imaging MBean settings.

  1. Log in to the target system on which the Imaging installation resides.

  2. Open a command-line shell.

  3. Change directories to Middleware Home.

    For Windows systems, enter:

    >cd ('%MW_HOME%/wlserver_10.3/common/bin')
     
    

    For Linux systems, enter:

    >cd ('$MW_HOME/wlserever_10.3/common/bin')
     
    
  4. Start WebLogic Server Scripting Tool.

    For Windows systems, enter:

    wls> wlst.cmd
     
    

    For Linux systems, enter:

    wls> ./wlst.sh
     
    

    This starts the WLST shell in a disconnected mode.

  5. Connect to the WebLogic administration server using the correct Imaging managed server port. For example:

    wls:/offline>connect()
    wls:/base_domain/serverConfig> connect()
    Please enter your username [weblogic]: <enter>
    Please enter your password [welcome1]: <enter>
    Please enter your server URL [t3://localhost:7001]:t3://localhost:16000
    Connecting to t3://localhost:16000 with userid weblogic...
    Successfully connected to managed Server 'IPM_server1' that belongs to domain 'base_domain'.
     
    

    Note that the port listed in the above example is the default listening port of the Imaging managed server and not that of the WLS administration server. Both the host name and port must point to the Imaging server. In some cases the Imaging host name may be different from the administration server.

  6. Switch to the custom MBean server where the Imaging MBean is exposed.

    wls:/base_domain/serverConfig> custom()
     
    

    Location changed to custom tree. This is a writable tree with no root.

    wls:/base_domain/custom> ls()
    drw-   EMDomain
    drw-   JMImplementation
    drw-   com.oracle.igf
    drw-   com.oracle.jdbc
    drw-   com.oracle.jps
    drw-   oracle.adf.share.config
    drw-   oracle.adf.share.connections
    drw-   oracle.as.util
    drw-   oracle.dfw
    drw-   oracle.dms
    drw-   oracle.dms.event.config
    drw-   oracle.imaging
    drw-   oracle.j2ee.config
    drw-   oracle.joc
    drw-   oracle.jocssl
    drw-   oracle.jrf.server
    drw-   oracle.logging
    

    The ls() command in this example lists the contents of the custom directory. Locate the oracle.imaging entry. Note that if the oracle.imaging MBean is not listed, you are not connected to the correct Imaging managed server port and should disconnect and then reconnect using the correct port.

  7. The MBeans are arranged in a directory structure, so change to the directory that contains the Imaging settings.

    wls:/base_domain/custom> cd('oracle.imaging')
    wls:/base_domain/custom/oracle.imaging> cd('oracle.imaging:type=config')
     
    
  8. Now you are in the directory that contains all of the Imaging settings. Enter the ls() command to see all of the configuration options and their settings, or the get('<name>') function to get a specific value.

    wls:/base_domain/.../> ls()
    .
    .
    .
    wls:/base_domain/.../> get('TiffCompressionType')
    'FAX4'
    
  9. Use the set(name, value) function to change a value. See Section 3.6.1, "Imaging MBeans" for information about when the change will take effect because it differs for each MBean.

    wls:/base_domain/.../> set('CheckInterval', 5)
     
    

3.6.3 Using Enterprise Manager to Set an MBean Value

If you use Enterprise Manager (EM) to monitor server performance, you may want to also use the Enterprise Manager System MBean Browser to view and change Imaging MBean values. To use the System MBean Browser, following this procedure:

  1. Log on to Enterprise Manager.

  2. Under Deployments, click the appropriate target (such as IPM_server1). The Summary page displays.

  3. To view MBeans, select System MBean Browser on the WebLogic Server menu. On the left navigation pane, under Application Defined MBeans, expand oracle.imaging. Select the appropriate server.

  4. Expand the appropriate server.

  5. Expand config.

  6. Double-click config to display the list of Imaging MBeans and their settings.

  7. Change the appropriate MBean setting and click Apply. See Section 3.6.1, "Imaging MBeans" for information about when the change will take effect because it differs for each MBean.

3.7 Setting Font Variables

Using unsupported fonts in your documents can cause the document to be unreadable, create incorrect text formatting, or cause shifting of data on text documents, including potentially exposing redacted content. For example, a redaction annotation is laid on top of a document. If that document is rendered using fonts on one system and the redaction is placed over a word based on the rendering, different fonts on a different system may cause the document text to render in a slightly different position. It would be possible for the data hidden beneath a redaction annotation to move and be exposed.

To help ensure that rendered text does not mistakenly shift beneath a redaction, ensure that all client machines being used to place redactions have the same fonts as the Imaging server. This allows the Oracle Outside In rendering engine to render the document using the same fonts as the client machine used to place the redaction. Once a TIFF image of the redacted file is rendered, redactions and text are displayed as an image, without use of fonts, unless a person has the proper security rights to see redacted text. This ensures that a user cannot try to force text to shift below a redaction by deleting a font and attempting to view the document, because the viewed document has already been converted to an image.

If running Imaging on a UNIX system, ensure that your UNIX servers are configured to use TrueType fonts (*.ttf or *.ttc files). Use WLST or Oracle Enterprise Manager 11g Fusion Middleware Control to set the Imaging server GDFontPath configuration MBean to include one or more paths to supported font files. If GDFontPath cannot be located, the current directory is used, which may or may not have the required fonts.

Note:

Setting the GDFontPath is required for UNIX systems only. It is not required to be set on Windows systems.

3.7.1 Configuring MBeans

The following steps are used to configure MBeans and detail specifically how to set the GDFontPath MBean.

To configure GDFontPath MBeans with Fusion Middleware Control:

  1. Access the Imaging domain in Oracle Enterprise Manager 11g Fusion Middleware Control at the following URL:

    http://adminServerHost:adminServerPort/em
    

    For example:

    http://machineName:7001/em
    
  2. Log in as the Administration user (for example, weblogic).

  3. In the navigation tree, expand Application Deployments, and then click the imaging application.

  4. On the Application Deployment menu, select System MBean Browser.

  5. Expand the oracle.imaging folder under Application Defined MBeans.

  6. Expand the Server: <server_name> and config folders, where <server_name> is the name of an Imaging server, such as IPM_server1. Repeat steps 6 through 10 for each Imaging server.

  7. Click config.

  8. Set GDFontPath to the location of your TTF files on the UNIX system (for example: /usr/share/X11/fonts/TTF).

  9. Click Apply.

  10. Restart the Imaging server.

3.8 Configuring Display of Seconds in Search Results

By default, the Content Server repository is not set to return seconds to Imaging when returning time information for display in a search results table. If you require seconds to be displayed in a search results table date and time field, you must configure the Content Server repository to return seconds using the SystemProperties applet. In order to run the SystemProperties applet, you must first temporarily disable JpsUserProvider. To configure Content Server to return seconds, do the following:

  1. Log in to the target system on which the Content Server installation resides.

  2. Open a command-line shell.

  3. Change directories to <domain_home>/ucm/cs.

    For Windows systems, enter:

    >cd ('%UCM_HOME%/ucm/cs')
    

    For Linux systems, enter:

    >cd ('$UCM_HOME/common/bin')
     
    
  4. Run ComponentTool and disable JpsUserProvider using the following command:

    ./bin/ComponentTool --disable JpsUserProvider
    
  5. Launch the SystemProperties applet by using the following command:

    ./bin/SystemProperties
    

    The SystemProperties applet is displayed.

  6. In the SystemProperties user interface, click the Localization tab.

  7. Select the Locale you want to modify. For example, English-US, then click Edit. The Configure Locale dialog box is displayed.

  8. Remove the square brackets ([]) from around the seconds in each field to require seconds be displayed. For example, change

    M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM

    to

    M/d/yy {h:mm:ss {aa}[zzz]}!mAM,PM

  9. Click OK. The Configure Locale dialog box closes.

  10. Run ComponentTool and enable JpsUserProvider using the following command:

    ./bin/ComponentTool --enable JpsUserProvider
    
  11. Restart Content Server. For information on how to restart Content Server, see the Oracle Universal Content Management Getting Started with Content Server guide.

3.9 Configuring Imaging Logging

Configure and view log files for Imaging using Oracle Enterprise Manager (EM) by doing the following:

  1. Log in to Enterprise Manager.

  2. Expand the WebLogic Domain navigation tree for Application Deployments and select your imaging server. The status of your Imaging server is displayed.

  3. On the Application Deployment menu, select Logs then Log Configuration.

  4. Select the Log Levels tab, which allows you to control the logging level. Under the Logger name section, expand Root Logger, oracle, then oracle.imaging to display the logger names associated with Imaging. From here you can change the logging level which affects the severity level of error messages collected.

  5. Optionally enable the Persist log level state across component restarts to ensure logging levels between restarts.

  6. Click Apply.

  7. Select the Log Files tab to display the Handler Name, Log Path, Log File Format and Rotation Policy of the logging file. From here you can create a new file, or copy, edit, or view the configuration of an existing file.

For more information about managing log files, log levels, and diagnostic data, see the Oracle Fusion Middleware Administrator's Guide.