|Oracle® XML Developer's Kit Programmer's Guide,
11g Release 1 (11.1)
Part Number B28394-04
|PDF · Mobi · ePub|
This chapter contains these topics:
Note:Use the new unified C++ API in
xml.hppfor new XDK applications. The old C++ API in
oraxml.hppis deprecated and supported only for backward compatibility.
Oracle XML parser for C++ determines whether an XML document is well-formed and optionally validates it against a DTD or XML schema. The parser constructs an object tree which can be accessed through one of the following two XML APIs:
DOM: Tree-based APIs. A tree-based API compiles an XML document into an internal tree structure, then allows an application to navigate that tree using the Document Object Model (DOM), a standard tree-based API for XML and HTML documents.
SAX: Event-based APIs. An event-based API, on the other hand, reports parsing events (such as the start and end of elements) directly to the application through a user defined SAX even handler, and does not usually build an internal tree. The application implements handlers to deal with the different events, much like handling events in a graphical user interface.
Tree-based APIs are useful for a wide range of applications, but they often put a great strain on system resources, especially if the document is large (under very controlled circumstances, it is possible to construct the tree in a lazy fashion to avoid some of this problem). Furthermore, some applications need to build their own, different data trees, and it is very inefficient to build a tree of parse nodes, only to map it onto a new tree.
This is the namespace for DOM-related types and interfaces.
DOM interfaces are represented as generic references to different implementations of the DOM specification. They are parameterized by
Node that supports various specializations and instantiations. Of them, the most important is
xmlnode which corresponds to the current C implementation
These generic references do not have a
NULL-like value. Any implementation must never create a reference with no state (like
NULL). If there is a need to signal that something has no state, an exception should be thrown.
Many methods might throw the
SYNTAX_ERR exception, if the DOM tree is incorrectly formed, or throw
UNDEFINED_ERR, in the case of wrong parameters or unexpected
NULL pointers. If these are the only errors that a particular method might throw, it is not reflected in the method signature.
Actual DOM trees do not depend on the context,
TCtx. However, manipulations on DOM trees in the current,
xmlctx-based implementation require access to the current context,
TCtx. This is accomplished by passing the context pointer to the constructor of
DOMImplRef. In multithreaded environment
DOMImplRef is always created in the thread context and, so, has the pointer to the right context.
DOMImplRef provides a way to create DOM trees.
DomImplRef is a reference to the actual
DOMImplementation object that is created when a regular, non-copy constructor of
DomImplRef is invoked. This works well in a multithreaded environment where DOM trees need to be shared, and each thread has a separate
TCtx associated with it. This works equally well in a single threaded environment.DOMString is only one of the encodings supported by Oracle implementations. The support of other encodings is an Oracle extension. The
oratext* data type is used for all encodings.Interfaces represent DOM level 2 Core interfaces according to
http://www.w3.org/TR/DOM-Level-2-Core/core.html. These C++ interfaces support the DOM specification as closely as possible. However, Oracle cannot guarantee that the specification is fully supported by our implementation because the W3C specification does not cover C++ binding.
DATATYPE DomNodeType - Defines types of DOM nodes.
DATATYPE DomExceptionCode - Defines exception codes returned by the DOM API.
DOMException Interface - See exception
DOMException in the W3C DOM documentation. DOM operations only raise exceptions in "exceptional" circumstances: when an operation is impossible to perform (either for logical reasons, because data is lost, or because the implementation has become unstable). The functionality of XMLException can be used for a wider range of exceptions.
NodeRef Interface - See interface
Node in the W3C documentation.
DocumentRef Interface - See interface
Document in the W3C documentation.
DocumentFragmentRef Interface - See interface
DocumentFragment in the W3C documentation.
ElementRef Interface - See interface
Element in the W3C documentation.
AttrRef Interface - See interface
Attr in the W3C documentation.
CharacterDataRef Interface - See interface
CharacterData in the W3C documentation.
TextRef Interface - See
Text nodes in the W3C documentation.
CDATASectionRef Interface - See
CDATASection nodes in the W3C documentation.
CommentRef Interface - See
Comment nodes in the W3C documentation.
ProcessingInstructionRef Interface - See
PI nodes in the W3C documentation.
EntityRef Interface - See
Entity nodes in the W3C documentation.
EntityReferenceRef Interface - See
EntityReference nodes in the W3C documentation.
NotationRef Interface - See
Notation nodes in the W3C documentation.
DocumentTypeRef Interface - See
DTD nodes in the W3C documentation.
DOMImplRef Interface - See interface
DOMImplementation in the W3C DOM documentation.
DOMImplementation is fundamental for manipulating DOM trees. Every DOM tree is attached to a particular DOM implementation object. Several DOM trees can be attached to the same DOM implementation object. Each DOM tree can be deleted and deallocated by deleting the document object. All DOM trees attached to a particular DOM implementation object are deleted when this object is deleted.
DOMImplementation object is not visible to the user directly. It is visible through class
DOMImplRef. This is needed because of requirements in the case of multithreaded environments
NodeListRef Interface - Abstract implementation of node list. See interface NodeList in the W3C documentation.
NamedNodeMapRef Interface - Abstract implementation of a node map. See interface NamedNodeMap in the W3C documentation.
AcceptNodeCode defines values returned by node filters provided by the user and passed to iterators and tree walkers.
WhatToShowCode specifies codes to filter certain types of nodes.
RangeExceptionCode specifies Exception kinds that can be thrown by the
CompareHowCode specifies kinds of comparisons that can be done on two ranges.
NodeFilter Interface - DOM 2 Node Filter.
NodeIterator Interface - DOM 2 Node Iterator.
TreeWalker Interface - DOM 2 TreeWalker.
DocumentTraversal Interface - DOM 2 interface.
RangeException Interface - Exceptions for DOM 2 Range operations.
Range Interface - DOM 2 Range.
DocumentRange Interface - DOM 2 interface.
DOMParser Interface - DOM parser root class.
GParser Interface - Root class for XML parsers.
ParserException Interface - Exception class for parser and validator.
SAXHandler Interface - Root class for current SAX handler implementations.
SAXHandlerRoot Interface - Root class for all SAX handlers.
SAXParser Interface - Root class for all SAX parsers.
SchemaValidator Interface - XML schema-aware validator.
GParser Interface - Root class for all XML parser interfaces and implementations. It is not an abstract class, that is, it is not an interface. It is a real class that allows users to set and check parser parameters.
DOMParser Interface - DOM parser root abstract class or interface. In addition to parsing and checking that a document is well formed, DOMParser provides means to validate the document against DTD or XML schema.
SAXParser Interface - Root abstract class for all SAX parsers.
If threads are forked off somewhere in the midst of the init-parse-term sequence of calls, you will get unpredictable behavior and results.
A call to
Tools::Factory to create a parser initializes the parsing process.
The XML input can be any of the
InputSource kinds (see
DOMParser invocation results in the DOM tree.
SAXParser invocation results in SAX events.
A call to
parser destructor terminates the process.
The following is the XML parser for C++ default behavior:
Character set encoding is UTF-8. If all your documents are ASCII, you are encouraged to set the encoding to US-ASCII for better performance.
Messages are printed to
msghdlr is specified.
XML parser for C++ determines whether an XML document is well-formed and optionally validates it against a DTD. The parser constructs an object tree that can be accessed through a DOM interface or operates serially through a SAX interface.
A parse tree which can be accessed by DOM APIs is built unless
saxcb is set to use the SAX callback APIs. Note that any of the SAX callback functions can be set to
NULL if not needed.
The default behavior for the parser is to check that the input is well-formed but not to check whether it is valid. The flag
XML_FLAG_VALIDATE can be set to validate the input. The default behavior for whitespace processing is to be fully conformant to the XML 1.0 spec, that is, all whitespace is reported back to the application but it is indicated which whitespace is ignorable. However, some applications may prefer to set the
XML_FLAG_DISCARD_WHITESPACE which will discard all whitespace between an end-element tag and the following start-element tag.
Note:It is recommended that you set the default encoding explicitly if using only single byte character sets (such as US-ASCII or any of the ISO-8859 character sets) for performance up to 25% faster than with multibyte character sets, such as UTF-8.
In both of these cases, an event-based API provides a simpler, lower-level access to an XML document: you can parse documents much larger than your available system memory, and you can construct your own data structures using your callback event handlers.
xdk/demo/cpp/parser/ directory contains several XML applications to illustrate how to use the XML parser for C++ with the DOM and SAX interfaces.
Change directories to the sample directory (
$ORACLE_HOME/xdk/demo/cpp on Solaris, for example) and read the
README file. This will explain how to build the sample programs.
Table 25-1 lists the sample files in the directory. Each file
*Main.cpp has a corresponding
Table 25-1 XML Parser for C++ Sample Files
|Sample File Name||Description|
Sample usage of C++ interfaces of XML parser and DOM.
Manually build DOM and then exercise.
Source for SAXSample program.
See Also:Oracle Database XML C++ API Reference for parser package APIs for C++