Remove the SP Card
- If possible, save the configuration information for the SP.
Refer to the related procedures using Oracle ILOM in the SPARC and Netra SPARC T4 Series Servers Administration Guide.
- Prepare for service.
See Preparing for Service.
- If a REM is installed in the server module, remove the REM.
See Remove a REM.
- Push down on the tab to eject the SP card (panel 1).
- Rotate the card up and off the retainer (panels 2 and 3).
Set the card on an antistatic mat.
- Install the new card.
SeeInstall the SP Card.