Use the clear_fault_action property with the set command to manually clear PSH-detected faults for a FRU.
If Oracle ILOM detects a FRU replacement, it will automatically clear the fault. For PSH-diagnosed faults, if the replacement of the FRU is detected by the SP or the fault is manually cleared on the host, the fault will also be cleared from Oracle ILOM. In such cases, you typically do not have to clear the fault manually.
Note - This procedure clears the fault from the SP but not from the host. If the fault persists in the host, clear it manually as described in Clear PSH-Detected Faults.
-> set /SYS/MB/CMP0/BOB0/CH0/D0 clear_fault_action=True Are you sure you want to clear /SYS/MB/CMP0/BOB0/CH0/D0 (y/n)? y Set ’clear_fault_action’ to ’true’