|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
You need to use the chassis Oracle ILOM CMM to display the network configuration for the Oracle ILOM service processor of each blade, including its IP address.
This procedure verifies that a blade's Oracle ILOM is working correctly and that you can access it through the Oracle ILOM CMM.
Before You Begin
The chassis CMM must already be connected to the network using its Ethernet management port, configured and operational. If it is not, see your chassis documentation before proceeding.
For example, type:
$ ssh username@CMMIPaddress
where username is a user account with administrator privileges and the CMMIPaddress is the IP address of the Oracle ILOM CMM.
Tip - The default Oracle ILOM administrator account user name is root and the password is changeme. If this default administrator account has been changed, contact your system administrator for an Oracle ILOM user account with administrator privileges.
Once you are successfully logged in to the Oracle ILOM CMM, you will see the Oracle ILOM prompt (->).
-> show /CH/BL0/SP/network
where BL0 represents a Netra Blade X3-2B slot 0 in the chassis. The Oracle ILOM CMM displays information about the blade, including its IP address and MAC address.
The following example shows blade 0 blade information:
-> show /CH/BL0/SP/network /CH/BL0/SP/network Targets: interconnect ipv6 test Properties: commitpending = (Cannot show property) dhcp_server_ip = 10.134.210.11 ipaddress = 10.134.210.152 ipdiscovery = dhcp ipgateway = 10.134.210.254 ipnetmask = 255.255.255.0 macaddress = 00:21:28:BB:D7:22 managementport = /SYS/SP/NET0 outofbandmacaddress = 00:21:28:BB:D7:22 pendingipaddress = 10.134.210.152 pendingipdiscovery = dhcp pendingipgateway = 10.134.210.254 pendingipnetmask = 255.255.255.0 pendingmanagementport = /SYS/SP/NET0 sidebandmacaddress = 00:21:28:BB:D7:23 state = enabled Commands: cd set show ->
You need to know the IP address of the SP to log in directly to the blade Oracle ILOM.
By default, the IP address of the blade SP is configured using DHCP. If you want to set a static IP address, see the Oracle ILOM 3.1 documentation.