|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
To replace a faulty processor (CPU) or upgrade a processor on the Netra Blade X3-2B motherboard.
Note - This component must be serviced by an Oracle-qualified service technician.
Before You Begin
A processor removal/insertion tool is required.
Ensure that the triangle on the corner of the processor aligns with the triangle on the side of the processor removal/replacement tool .
An audible click indicates that the processor is locked in place.
Carefully align the processor over processor socket 0 or 1. Ensure that the notches on the sides of the processor align with the keys on the socket.
To properly position the tool in the processor socket, rotate the tool until the green triangle on the side of the tool is facing the front of the server and it is over the left side of the processor socket (when viewing the server from the front) and lower the tool into the processor socket.
Caution - Do not press down on the processor. Irreparable damage to the processor or motherboard might occur from excessive downward pressure. Do not forcibly seat the processor into the socket. Excessive downward pressure might damage the socket pins.
Lift the empty insertion/removal tool off of the motherboard.
When properly aligned, the processor sits flat in the processor socket and has minimal side-to-side movement.
This action secures the processor in the socket.