|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
From the Oracle ILOM web interface, click Host Management > Power Control, and then from the Action list, select Reset.
From the Oracle local server, press the Power button (approximately one second) on the front panel of the server to power off the server, and then press the Power button again to power on the server.
From the Oracle ILOM CLI on the server SP, type: reset /System. The BIOS screen is displayed.
Note - The next events occur very quickly; therefore, focused attention is needed for the following steps. Watch carefully for these messages as they appear on the screen for a brief time. You might want to enlarge the size of your screen to eliminate scroll bars.
The Please select boot device menu is displayed listing the available boot device.
The network bootloader loads, and a boot prompt is displayed. After a few seconds the installation kernel begins to load.
Oracle VM server is installed.
For additional information see the Oracle VM Server installation documentation at:
Install Oracle VM Manager, if needed. See