|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
To replace a drive (hard disk drive) in the blade:
The release lever will start to close as it makes contact with the chassis. Do not slide the storage drive in all the way. Leave the storage drive out approximately 0.25 to 0.50 inch (6 to 12 mm) from the opening.
Note - If the storage devices were previously configured as a mirrored RAID 1 array, an automatic resynchronization is invoked and the contents are automatically rebuilt from the rest of the array with no need to reconfigure the RAID parameters. If the replaced storage device was configured as a hot-spare, the new HDD is automatically configured as a new hot-spare.