Skip navigation.

LIBTUX Messages 700-799

  Previous Next

700

ERROR: Invalid search key

Description

An internal BEA TUXEDO system table was requested, and could not be read because an invalid search key was passed to the low-level access routine.

Action

Contact your BEA TUXEDO system Technical Support.

701

ERROR: [Parameter error in internal routine]

Description

One of the internal routines to modify structures in the TUXEDO System/T bulletin board received a parameter that did not match any of the allowable values.

Action

Contact your BEA TUXEDO system Technical Support.

703

ERROR: Cannot get statistics on message queue number

Description

A msgctl kernel call performing an IPC-STAT operation failed for message queue number.

Action

Contact your BEA TUXEDO system Technical Support.

704

ERROR: Operating system parameter for message queues too small

Description

The UNIX System kernel parameters related to message queues are set too low.

Action

Check the kernel parameters related to message queue capacities, and increase if necessary. In particular, check MSGMNB.

See Also

BEA TUXEDO Installation Guide

705

ERROR: No BRIDGE available for remote send

Description

A BEA TUXEDO system process attempted to send a message to another machine, but the BRIDGE system process could not be located.

Action

Shut down and reboot the BEA TUXEDO system on this machine.

709

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc() failed while searching for the BRIDGE system process's server table entry.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

710

ERROR: Server table index out of range

Description

A service could not be advertised because of an invalid internal handle identifying the server process offering it.

Action

Contact your BEA TUXEDO system Technical Support.

711

ERROR: Server table index out of range

Description

A service could not be advertised because of an internal data structure inconsistency.

Action

Contact your BEA TUXEDO system Technical Support.

712

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc() failed while advertising a service.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

713

ERROR: Queue parameter error in internal routine

Description

One of the internal routines to manage TUXEDO System/T data structures received an invalid queue table parameter. This should not occur during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

715

ERROR: Cannot attach bulletin board - magic number mismatch

Description

The process just attached to a shared memory region, expecting to find a BEA TUXEDO system bulletin board. The header's magic number indicates that it is not a valid bulletin board.

Action

Verify that the configuration file's IPCKEY parameter is unique, and not being used by any other software product on the machine. The UNIX ipcs utility may help diagnose the conflict.

716

ERROR: Cannot attach bulletin board - wrong release of software

Description

The BEA TUXEDO system software has been updated on the machine, but this process has not been rebuilt with the new libraries. It therefore cannot interpret the bulletin board data structures.

Action

Rebuild the process with updated BEA TUXEDO system libraries.

See Also

buildclient(1), buildserver(1), buildtms(1), buildwsh(1), buildmio(1)

717

ERROR: Cannot attach to or create shared memory

Description

The calling process could not attach to the bulletin board's shared memory. It then attempted to create the bulletin board, but did not have the correct permissions to do so.

Action

Verify that the configuration file's IPCKEY parameter is correct, and that the application is booted.

721

ERROR: Server group creation failure

Description

A server group entry in the bulletin board could not be created due to an internal error.

Action

Contact your BEA TUXEDO system Technical Support.

722

ERROR: Cannot add subtype to bulletin board

Description

A subtype could not be added to the bulletin board due to an internal error.

Action

Contact your BEA TUXEDO system Technical Support.

723

ERROR: Cannot add subtype: no more room in subtype table

Description

The bulletin board's subtype table is full, and a new subtype cannot be added.

Action

Increase the MAXBUFSTYPE parameter in the configuration file's RESOURCES section.

724

ERROR: Service information invalid

Description

A BEA TUXEDO system internal function was used to retrieve service information from the services table, but a NULL service name was used.

Action

Contact your BEA TUXEDO system Technical Support for assistance.

725

ERROR: Server information invalid, does not exist

Description

An internal error occurred while a service was being added to the bulletin board's tables.

Action

Contact your BEA TUXEDO system Technical Support.

726

ERROR: Server information invalid, does not exist

Description

An internal data structure inconsistency was detected while a service was being added to the bulletin board's tables.

Action

Contact your BEA TUXEDO system Technical Support.

727

ERROR: [Server parameter error in internal routine]

Description

The internal routine to create a server table entry received invalid parameters. This should not happen during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

728

ERROR: [Queue parameter error in internal routine]

Description

One of the internal routines to manage TUXEDO System/T data structures received an invalid queue table parameter. This should not occur during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

729

ERROR: Server not available, doing work

Description

An attempt to create a server table entry failed because the server was busy.

Action

Wait until the server is no longer busy, and then retry the failed operation.

730

ERROR: No space for another queue table entry

Description

There are no more queue table entries left in the system. The number of queue table entries is equal to the maximum number of servers as specified in the UBBCONFIG file.

Action

Increase the maximum number of servers, as specified by the MAXSERVERS parameter in the RESOURCES section of the UBBCONFIG file. This can be done by editing the configuration file and reloading it with tmloadcf(1), or it can be done through dynamic administration using the tmconfig(1) command.

See Also

ubbconfig(5), tmloadcf(1), tmconfig(1)

732

ERROR: BBL unstable or dead

Description

The BBL (Bulletin Board Liaison) process is unstable or dead.

Action

Look for associated messages in the userlog related to the BBL. These may give more insight about the problem. If using a multi-node configuration, make certain that the network is operating properly and has sufficient bandwidth. Verify that the TUXEDO System/T administrator or the UNIX System administrator did not kill the BBL process. Oftentimes, a network that is inoperative or slow may result in a BBL response problem.

733

ERROR: [Type information invalid]

Description

The internal routine to create an entry in the bulletin board types table was passed invalid parameters. This should not happen during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

734

ERROR: Cannot add to type table due to lack of space

Description

There are no more type table entries left in the system. An attempt to add an additional type to the bulletin board has failed due to a lack of space. The number of type table entries is equal to the number specified in the UBBCONFIG file.

Action

Increase the maximum number of type table entries, as specified by the MAXBUFTYPE parameter in the RESOURCES section of the UBBCONFIG file. This can be done by editing the configuration file and reloading it with tmloadcf(1), or it can be done through dynamic administration using the tmconfig(1) command.

See Also

ubbconfig(5), tmloadcf(1), tmconfig(1)

735

ERROR: [Queue parameter error in internal routine]

Description

See message 728 for an explanation.

Action

See message 728 for an explanation.

736

ERROR: [Cannot delete entry from queue table due to invalid server association]

Description

An attempt to delete an entry from the internal TUXEDO System/T queue table failed while attempting to delete one of the servers associated with the queue. This should not happen during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

737

ERROR: [Invalid service information passed to internal routine]

Description

One of the internal routines to manage TUXEDO System/T data structures received an invalid service table parameter. This should not occur during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

738

ERROR: [Invalid server information passed to internal routine]

Description

One of the internal routines to manage TUXEDO System/T data structures received an invalid server table parameter. This should not occur during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

739

ERROR: [Inconsistent service/server associations in bulletin board]

Description

The TUXEDO System/T bulletin board data structures contain an invalid service/server association. This indicates a corruption of data structures and should not occur during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

744

ERROR: Not attached to a Bulletin Board

Description

The process producing this error message is not attached to the TUXEDO System/T configuration.

Action

If this message occurred in a client process, make sure that the process successfully invokes tpinit() before issuing any other System/T calls (with the exception of calls noted as being specifically allowed prior to tpinit()). If the error occurred within an administrative process or a server process, contact your BEA TUXEDO system Technical Support.

745

ERROR: Process not attached to a Bulletin Board

Description

See message 744 for an explanation.

Action

See message 744 for an explanation.

746

ERROR: Cannot lock Bulletin Board

Description

A process was unable to lock the TUXEDO System/T shared memory data structures.

Action

Contact your BEA TUXEDO system Technical Support.

747

ERROR: Process not attached to Bulletin Board

Description

See message 744 for an explanation.

Action

See message 744 for an explanation.

748

ERROR: Cannot unlock Bulletin Board

Description

The process was unable to successfully unlock the TUXEDO System/T Bulletin Board. As a result of this problem, other processes will be unable to lock the Bulletin Board. The most common cause of this error is the accidental removal of some or all of the TUXEDO System/T semaphore sets.

Action

Ask the privileged users on your system (normally the TUXEDO System/T administrator and root) whether they may have accidentally removed some IPC resources, perhaps through inadvertent use of the UNIX System ipcrm(1) command. If no IPC resources have been accidentally removed, contact your BEA TUXEDO system Technical Support.

749

ERROR: Cannot unlock Bulletin Board, not the locker

Description

The process attempted to unlock the TUXEDO System/T Bulletin Board, but it was not the locker of the Bulletin Board. Because of this, no change was made to the status of the Bulletin Board.

Action

Contact your BEA TUXEDO system Technical Support.

751

ERROR: semop system call failure for semaphore semno, errno = errno_val

Description

A semop(2) system call failed for one of the semaphores that control access to TUXEDO System/T data structures. The semno refers to the index of the semaphore within a particular set; this information may be useful to support technicians. errno refers to the UNIX System error returned by the semop(2) system call. This value can be very helpful to application administrators in diagnosing the cause of the problem.

Action

Refer to the UNIX System intro(2) and semop(2) manual pages to translate the numeric value of errno into a symbolic value and determine the possible causes of such an error. For example, errno values of 22 (

752

ERROR: semop system call failure for semaphore semno, errno errno_val

Description

See message 751 for an explanation.

Action

See message 751 for an explanation.

753

ERROR: [Invalid service information passed to internal routine]

Description

See message 737 for an explanation. See message 737 for an explanation.

754

ERROR: Service does not match existing services offered

Description

When a new server is added to an existing group of servers on an MSSQ set, the new server must offer the same set of services as the existing servers, and these services must be performed by the same service functions. Also, the executable for the new server must be the same file as the existing server(s) on the queue, or a link to the same file. The server being started did not obey these restrictions.

Action

Make sure that the path name of the new server executable is the same as the path name for the existing server(s) on the queue used by the new server. Determine the services currently advertised on the server queue, and make sure that the new server offers the same set of services. The services currently offered on a queue can be determined through the tmadmin(1) printservice command with the -q option.

See Also

tmadmin(1), ubbconfig(5)

755

ERROR: Restarting server cannot delete queue

Description

A server being restarted by the restartsrv(1) command was unable to delete an entry from the TUXEDO System/T queue table.

Action

Contact your BEA TUXEDO system Technical Support.

See Also

restartsrv(1)

756

ERROR: Cannot get status for server files new_server_executable and existing_server_executable

Description

When adding a server to an MSSQ set on which there are already one or more servers executing, the BEA TUXEDO system verifies that the new server either has the same file name as the existing server(s) or is a link to these server(s). This latter check requires executing the UNIX System stat(2) system call on the new server and an existing server. This call failed for one or both of these servers. As a result of this failure, the new server will not be started.

Action

Make certain that both files listed in the error message exist, that all components in the path prefixes of these files are directories, and that the user ID under which the new server is being started has search permission on every directory in the path prefix. Refer to the UNIX System stat(2) reference page for further information.

See Also

stat(2)

757

ERROR: Memory allocation failure

Description

The BEA TUXEDO system received an error return when attempting to allocate memory from the operating system

Action

Attempt to decrease the amount of memory required by TUXEDO System/T, or add more physical memory to the machine. The amount of memory required by the BEA TUXEDO system is influenced by the parameters given in the UBBCONFIG file. Refer to the Administering the BEA TUXEDO System for further information. The number of processes running on a machine and the options given to those processes also have a large effect on memory usage.

758

ERROR: Cannot find desired server to remove

Description

While attempting to remove a server from the TUXEDO System/T bulletin board, the BEA TUXEDO system was unable to find the server in its internal tables.

Action

Contact your BEA TUXEDO system Technical Support.

759

ERROR: Cannot find queue entry for server that is to be removed

Description

While attempting to remove a server from the TUXEDO System/T bulletin board, the BEA TUXEDO system was unable to find the queue associated with the server in its internal tables

Action

Contact your BEA TUXEDO system Technical Support.

760

ERROR: [Queue parameter error in internal routine]

Description

See message 728 for an explanation.

Action

See message 728 for an explanation.

761

ERROR: [Queue parameter error in internal routine]

Description

See message 728 for an explanation.

Action

See message 728 for an explanation.

762

ERROR: [Parameter error in internal routine]

Description

One of the internal routines to modify structures in the TUXEDO System/T bulletin board received a parameter that did not match any of the allowable values.

Action

Contact your BEA TUXEDO system Technical Support.

763

ERROR: [Server group parameter error in internal routine]

Description

One of the internal TUXEDO System/T routines to manipulate server group parameters within the bulletin board received an invalid input parameter. This should not happen during normal system operation.

Action

Contact your BEA TUXEDO system Technical Support.

764

ERROR: [Server group parameter error in internal routine]

Description

See message 763 for an explanation.

Action

See message 763 for an explanation.

765

ERROR: [Server group parameter error in internal routine]

Description

See message 763 for an explanation.

Action

See message 763 for an explanation.

766

ERROR: [Parameter error in internal routine]

Description

See message 762 for an explanation.

Action

See message 762 for an explanation.

767

ERROR: [Parameter error in internal routine]

Description

See message 762 for an explanation.

Action

See message 762 for an explanation.

768

ERROR: [Invalid service information passed to internal routine]

Description

See message 737 for an explanation.

Action

See message 737 for an explanation.

769

ERROR: [Invalid service information passed to internal routine]

Description

See message 737 for an explanation.

Action

See message 737 for an explanation.

770

ERROR: [Invalid service information passed to internal routine]

Description

See message 737 for an explanation.

Action

See message 737 for an explanation.

771

ERROR: [Invalid service information passed to internal routine]

Description

See message 737 for an explanation.

Action

See message 737 for an explanation.

772

ERROR: Invalid search criteria given

Description

See message 762 for an explanation.

Action

See message 762 for an explanation.

773

ERROR: Invalid server information given

Description

This error occurs when a client or server is requesting to look up server table entries in the Bulletin Board by SRVID and GROUPID, and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

774

ERROR: Invalid server information given

Description

This error occurs when a client or server is requesting to look up server table entries in the Bulletin Board by GROUP and MACHINE, and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

775

ERROR: Invalid queue information given

Description

This error occurs when a client or server is requesting to look up server table entries in the Bulletin Board by QUEUE name, and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

776

ERROR: Invalid server information given

Description

This error occurs when a client or server is requesting to look up server table entries in the Bulletin Board by using the rlink field or a TMID, and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

777

ERROR: Invalid search criteria given

Description

This error occurs when a client or server is requesting to look up server table entries in the Bulletin Board and supplies an incorrect or NULL scope argument. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

778

ERROR: Invalid queue information given

Description

This error occurs when a client or server is requesting to update queue table entries in the Bulletin Board and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

779

ERROR: Invalid server group information given

Description

This error occurs when a client or server is requesting to update server group table entries in the Bulletin Board and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

780

ERROR: Invalid entry information given

Description

This error occurs when a client or server is requesting to update the status of table entries in the Bulletin Board and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

781

ERROR: Invalid service information given

Description

This error occurs when a client or server is requesting to update service table entries in the Bulletin Board and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

782

ERROR: Invalid server information given

Description

This error occurs when a client or server is requesting to update server table entries in the Bulletin Board and supplies incorrect or NULL arguments. This happens if there is a bug in the calling routine.

Action

Report this failure to your BEA TUXEDO system Technical Support.

788

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

789

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

790

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

791

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

792

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

793

ERROR: Memory allocation failure

Description

An attempt dynamically to allocate memory from the operating system using malloc(3) failed.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.

See Also

malloc(3) in UNIX System reference manuals

 

Skip footer navigation  Back to Top Previous Next