LIBTUX Messages 4000-4099
|
|
4000
WARN: duplicate interface servicename passed in to be advertised...
Description
An interface with the same Interface ID has already been registered with the WLE infrastructure.
Action
Check the application server code for any interface being specified more than once.
4001
WARN: interface ID servicename longer than max length allowed, truncating to number bytes...
Description
The specified interface has an Interface ID longer than the allowed limit.
Action
Shorten the Interface ID length to allowed length.
4002
WARN: Implementation ID servicename of interface servicename longer than max length allowed, truncating to number bytes...
Description
The specified interface has an Implementation ID longer than the allowed limit.
Action
Shorten the Implementation ID length to allowed length.
4003
ERROR: Memory allocation failure
Description
The server process could not allocate virtual memory.
Action
Either reduce the memory usage on the machine or add more memory. Try increasing space on the swap device.
4004
ERROR: Internal error, could not determine address of default ORB function.
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure. Contact BEA Customer Support.
Action
Contact BEA Customer Support.
4005
ERROR: Internal error, could not set TMPROC values.
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4006
ERROR: Internal error, could not get parameters for interface servicename
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4008
ERROR: Internal error, could not advertise interfaces...
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4009
ERROR: Interface servicename's policies not consistent across Group Group, could not advertise interfaces...
Description
The specified interface is being offered by another server in the specified group with different deactivation or transaction policies. This is not allowed.
Action
Make sure all instances of the interface across all servers in the group have the same activation and transaction policies.
4010
ERROR: Bulletin Board limit reached, could not advertise interfaces...
Description
Maximum number of interfaces in the application (as specified by the MAXINTERFACES parameter in the RESOURCES section of the UBBCONFIG file) has been reached. No more interfaces can be offered.
Action
Increase this parameter to a higher value. This can be done at run time using the TMIB API or tmconfig. For more information, see the BEA Tuxedo System Reference Manual and Administration Guide.
4011
ERROR: [NULL interface name used to get interface information]
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4012
ERROR: Maximum number of types/subtypes, val, has been exceeded
Description
The maximum number of types/subtypes permitted for a particular Tuxedo System/T interface has been exceeded. The number allowed is val.
Action
Review the configuration file, verify that all interfaces use less than the maximum number of types/subtypes, and reload the TUXCONFIG file.
See Also
ubbconfig(5), tmloadcf(1)
4013
ERROR: [Invalid buffer type information val]
Description
The buffer type information provided in the configuration file for an interface entry was incorrect.
Action
Check the configuration file, verify that the buffer type provided is correct, and repeat the operation.
See Also
ubbconfig(5), tmloadcf(1)
4014
ERROR: [Invalid buffer subtype information val]
Description
The buffer subtype information provided in the configuration file for an interface entry was incorrect.
Action
Check the configuration file, verify that the buffer type provided is correct, and repeat the operation.
See Also
ubbconfig(5), tmloadcf(1)
4015
ERROR: Memory allocation failure
Description
The server process could not allocate virtual memory.
Action
Either reduce the memory usage on the machine or add more memory. Try increasing space on the swap device.
4016
ERROR: Interface parameter error in internal routine
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4017
ERROR: Invalid interface information passed to internal routine
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4018
ERROR: Memory allocation failure.
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4020
ERROR: tmrsvrs() returned multiple servers.
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4021
WARN: Duplicate FACTORY routing criteria crit
Description
A routing criteria crit,
buffer type combination typ was specified more than once
in the ROUTING section of the ubbconfig(5) file
for entries that have the TYPE parameter
set to FACTORY.
Action
Correct the configuration file to remove the duplicate entry, and rerun
tmloadcf(1).
See Also
Administering the BEA Tuxedo System,
tmloadcf(1),
ubbconfig(5)
4023
ERROR: Invalid interface information passed to internal routine
Description
The server has encountered an internal error while unregistering interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4024
ERROR: invalid service name found
Description
The server has encountered an internal error while reading the WLE Bulletin Board.
Action
Contact BEA Customer Support.
4026
ERROR: Internal error, could not set policies for interface servicename
Description
The server has encountered an internal error while registering its interfaces with the WLE infrastructure.
Action
Contact BEA Customer Support.
4027
ERROR: [Memory allocation failure.]
Description
The server process could not allocate virtual memory.
Action
Either reduce the memory usage on the machine or add more memory. Try increasing space on the swap device.
4028
ERROR: Memory allocation failure.
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4029
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4030
WARN: Interface val's transaction policy setting of "IGNORE" or "NEVER" conflicts with "AUTOTRAN=Y" setting in UBBCONFIG file, turning off AUTOTRAN setting...
Description
An interface has its transaction policy set to either IGNORE or NEVER, but its entry in the UBBCONFIG file has AUTOTRAN set to Y, which is contradictory. This AUTOTRAN flag is turned off internally.
Action
Change either the setting in the UBBCONFIG file or the policy setting in the ICF file so that they both match.
4031
ERROR: Internal error, process could not attach to bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
After running application code, the program was unable to
reattach in FASTPATH mode.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4032
ERROR: Internal error, process could not detach from bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
Detaching from the bulletin board failed.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4033
ERROR: Internal error, process could not detach from bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
Detaching from the bulletin board failed.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4034
WARN: Interface val's transaction policy setting of "MANDATORY" conflicts with "AUTOTRAN=Y" setting in UBBCONFIG file, turning off AUTOTRAN setting...
Description
An interface has its transaction policy set to either IGNORE or NEVER, but its entry in the UBBCONFIG file has AUTOTRAN set to Y, which is contradictory. This AUTOTRAN flag is turned off internally.
Action
Change either the setting in the UBBCONFIG file or the policy setting in the ICF file so that they both match.
4035
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4036
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4039
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4040
WARN: interface ID val longer than max length allowed, truncating to val bytes...
Description
The specified interface has an Interface ID longer than the allowed limit.
Action
Shorten the Interface ID length to the allowed length.
4041
WARN: Implementation ID val of interface val longer than max length allowed, truncating to val bytes...
Description
The specified implementation ID of the specified interface is longer than the allowed limit.
Action
Shorten the Implementation ID length to the allowed length.
4042
WARN: interface val passed in to be unadvertised is not currently advertised by this server...
Description
This Interface has NOT been previously registered with the WLE infrastructure.
Action
Check application code if Interface being unregistered had indeed been registered previously.
4043
WARN: duplicate interface val passed in to be unadvertised...
Description
An interface having the same Interface ID has already been passed in to be unadvertised.
Action
Check application code if same Interface is being passed in repeatedly to be unregistered.
4044
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of swap space and physical memory on the machine.
4045
ERROR: Internal error, process could not attach to bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
After running application code, the program was unable to
reattach in FASTPATH mode.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4046
ERROR: Internal error, invalid internal service name found in in-process table
Description
An internal error has occurred while trying to unregister Interfaces.
Action
Contact BEA Customer Support.
4047
ERROR: Internal error, could not unadvertise interfaces...
Description
An internal error has occurred while trying to unregister Interfaces.
Action
Contact BEA Customer Support.
4048
ERROR: Internal error, process could not detach from bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
Detaching from the bulletin board failed.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4049
ERROR: Internal error, in-process table corrupted...
Description
An internal error has occurred while trying to (un)register Interfaces.
Action
Contact BEA Customer Support.
4050
ERROR: Internal error, process could not detach from bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
Detaching from the bulletin board failed.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4051
ERROR: Internal error, process could not detach from bulletin board...
Description
A process was booted with PROTECTED SYSTEM_ACCESS access to its bulletin
board area of shared memory.
Detaching from the bulletin board failed.
Action
Contact BEA Customer Support.
See Also
ubbconfig(5)
4052
ERROR: NULL input buffer not allowed for service 'service_name', which uses routing
Description
An application program passed a NULL input buffer to the service service_name, which is defined in the configuration file as using routing. Since the null buffer is not a valid type to perform routing on, the service call was rejected with an error.
Action
Recode the service call that resulted in the error so that the input buffer is of one of the types specified in the routing criterion that is associated with this service in the UBBCONFIG file.
See Also
tpcall(5c), ubbconfig(5)
4053
ERROR: Routing function failed
Description
The function used to perform data dependent routing during a service call returned an error. If using the Tuxedo System/T supplied routing functions, a previous userlog message will give more specifics as to the cause of the error. If the application administrator modified the buffer type switch to add additional routing functions, a previous userlog message may or may not be present.
Action
Refer to the previous message in the userlog for more information on the cause of the error.
See Also
ubbconfig(5), tuxtypes(5)
4054
ERROR: Unknown group name returned from routing function
Description
The function used to perform data dependent routing during a service call indicated that the current data is to be routed to a group name that does not exist. If using the routing functions for Tuxedo System/T supplied types, this should not happen.
Action
Contact BEA Customer Support.
4055
ERROR: No service 'service_name' in group 'group_name'
Description
The service service_name is not offered as part of group group_name. This message may occur when the routing criterion associated with service service_name specifies one or more groups in which the service is not currently offered.
Action
Examine the routing criterion associated with service_name in the configuration file. Make certain that service service_name is offered in each group listed in the routing criterion. If the service is temporarily not available in a particular group, start the server(s) that offers service_name in that group. If service_name is not meant to be offered in a particular group, modify the routing criterion so that group is no longer listed.
 |
 |
 |