Q Messages 1600-1699
|
|
1600
ERROR: Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
TMQFORWARD(5)
1601
ERROR: realloc() failed
Description
An attempt to dynamically re-allocate memory from the operating system using realloc() failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
TMQFORWARD(5)
1602
WARN: -t option ignored as argument must be numeric
Description
The argument for the -t option on the command line for TMQFORWARD is non-numeric and is ignored. The default transaction time value will be used.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -t option is a numeric value indicating the number of seconds before transaction timeout occurs.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1603
WARN: -t option ignored as argument is too large
Description
The numeric argument for the -t option on the command line for TMQFORWARD is too large and is ignored. The default transaction time value will be used.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -t option is a numeric value less than 2147483648 indicating the number of seconds before transaction timeout occurs.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1604
WARN: -i option ignored as argument must be numeric
Description
The argument for the -i option on the command line for TMQFORWARD is non-numeric and is ignored. The default idle time value, 30 seconds, will be used.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -i option is a numeric value indicating the number of seconds that the server is idle after finding no messages on the queues before it reads the queues again.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1605
WARN: -i option ignored as argument is too large
Description
The numeric argument for the -i option on the command line for TMQFORWARD is too large and is ignored. The default idle time value, 30 seconds, will be used.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -i option is a numeric value less than 2147483648 indicating the number of seconds that the server is idle after finding no messages on the queues before it reads the queues again.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1606
WARN: Invalid command line argument 'opt' ignored
Description
An invalid option, opt, was specified on the command line for TMQFORWARD.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server to remove the invalid command line option. Check the manual page for valid options.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1607
ERROR: -q option not specified
Description
The -q option is a required option for the TMQFORWARD and was not specified in the command line options. The server will not boot.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server to include the -q option with a list of one or more queues for which the server will forward queued messages.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1608
ERROR: TMSNAME must begin with TMS_QM
Description
The application is configured such that the TMQFORWARD server is in a group in the GROUPS section that does not have the TMSNAME set to TMS_QM. The server will not boot.
Action
Change the TUXCONFIG file to have the TMSNAME set to TMS_QM and reboot the TMQFORWARD server.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1609
WARN: [Unable to verify that TMSNAME begins with TMS_QM]
Description
The TMQFORWARD server was unable to verify that the TMSNAME for the group in the GROUPS section associated with TMQFORWARD is set to TMS_QM (that is, it was unable to find the corresponding GROUPS entry).
Action
Contact BEA Customer Support.
See Also
TMQFORWARD(5)
1610
ERROR: Must not have a reply queue configured
Description
The application is configured such that the TMQFORWARD server has a reply queue. The server will not boot.
Action
Change the TUXCONFIG file such that the TMQFORWARD server does not have a reply queue (that is, REPLYQ=N).
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1611
ERROR: Must not be configured as part of an MSSQ
Description
The application is configured such that the TMQFORWARD server is part of an multiple-server-single-queue, MSSQ, set. The server will not boot.
Action
Change the TUXCONFIG file such that the TMQFORWARD server is not part of an MSSQ set (that is, don't specify a RQADDR).
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1612
ERROR: Must not advertise services
Description
The application is configured such that the TMQFORWARD server advertised services as part of booting. The server will not boot.
Action
Change the TUXCONFIG file such that the CLOPT for the TMQFORWARD server does not include the -s option. If a custom version of TMQFORWARD is built using buildserver, don't specify the -s option.
See Also
TMQFORWARD(5), buildserver(1), tmconfig(1), ubbconfig(5)
1613
ERROR: tpopen() failed, tperrno = tperrno
Description
While initializing the TMQFORWARD server, tpopen() returned an error. The server will not boot.
Action
Use the returned tperrno and check the userlog to determine what the error was. Resolve the problem and re-boot the server.
See Also
TMQFORWARD(5)
1614
ERROR: Queue name not found
Description
One of the queue names, name, specified as an argument to the -q option of the TMQFORWARD server is not valid for the associated queue space. The server will not boot.
Action
Use the qinfo command of qmadmin to get a list of valid queues for the queue space. Change the TUXCONFIG file such that the CLOPT for the TMQFORWARD server has a valid list of queue names for the -q option and re-boot the server.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1615
WARN: Dropping message received
Description
An application message was received by the TMQFORWARD server. Since the TMQFORWARD server is not set up to handle application messages directly, the message was dropped. (The TMQFORWARD server cannot be booted if it advertises services but there is no mechanism to keep an administrator from dynamically advertising services for the server from tmadmin ).
Action
Unadvertise any services that were accidentally advertised for the TMQFORWARD server.
See Also
TMQFORWARD(5), tmadmin(1)
1616
ERROR: Failed to start a transaction count times; exiting
Description
The TMQFORWARD server has failed to start a transaction via tpbegin count times. The server will exit (assuming that there something is wrong).
Action
If the TMQFORWARD server is set to restart, then the server will be restarted automatically. Check for other userlog messages that may indicate the problem.
See Also
TMQFORWARD(5)
1617
INFO: no messages on queues - shutting down
Description
The TMQFORWARD server tried to dequeue a message from each of the queues named in the -q command line option and found no messages on any queue. The -e command line option was specified and the server is shutting down gracefully.
Action
No action required.
See Also
TMQFORWARD(5)
1618
ERROR: tpalloc() failed - server exiting
Description
An attempt to dynamically allocate a typed buffer using tpalloc() failed in TMQFORWARD. The failure will cause the server to exit.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The server will restart automatically if it is configured as restartable.
See Also
TMQFORWARD(5)
1621
WARN: Unable to dequeue message for deleting, diagnostic diagnostic
Description
A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to delete the queued message from the queue. The associated diagnostic, diagnostic, is printed as part of the message.
Action
Determine what caused the dequeuing to fail. Most likely, the message reached the retry limit and was moved to the error queue; in this case, the diagnostic would be QMENOMSG . In the worst case, the message will not be deleted from the queue and will be executed again.
See Also
TMQFORWARD(5), tpdequeue(3c)
1622
WARN: Unable to enqueue failure message, diagnostic diagnostic
Description
A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to enqueue the reply message on the failure queue. The associated diagnostic, diagnostic, is printed as part of the message.
Action
Determine what caused the enqueuing to fail based on the diagnostic and by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
See Also
TMQFORWARD(5), tpenqueue(3c)
1623
WARN: Failed to dequeue message and queue failure message, tperrno = tperrno
Description
A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to commit the transaction in which the original message was dequeued and the reply message was enqueued on the failure queue.
Action
Determine what caused the transaction to fail by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
See Also
TMQFORWARD(5), tpcommit(3c)
1624
WARN: Failed to start transaction to handle service failure, tperrno = tperrno
Description
A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to start a transaction in which the original message is dequeued and the reply message is enqueued on the failure queue.
Action
Determine what caused the transaction start, tpbegin , to fail by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
See Also
TMQFORWARD(5), tpbegin(3c)
1625
WARN: -t option ignored as argument must be numeric
Description
The argument for the -t option on the command line for TMQUEUE is non-numeric and is ignored. The default transaction time value will be used.
Action
Change the server command line options, CLOPT , for the TMQUEUE server such that the argument for the -t option is a numeric value indicating the number of seconds before transaction timeout occurs.
See Also
TMQUEUE(5), tmconfig(1), ubbconfig(5)
1626
WARN: -t option ignored as argument is too large
Description
The numeric argument for the -t option on the command line for TMQUEUE is too large and is ignored. The default transaction time value will be used.
Action
Change the server command line options, CLOPT , for the TMQUEUE server such that the argument for the -t option is a numeric value less than 2147483648 indicating the number of seconds before transaction timeout occurs.
See Also
TMQUEUE(5), tmconfig(1), ubbconfig(5)
1627
WARN: Invalid command line option 'opt' ignored
Description
An invalid option, opt, was specified on the command line for TMQFORWARD and ignored.
Action
Change the server command line options, CLOPT , for the TMQFORWARD server to remove the invalid command line option. Check the manual page for valid options.
See Also
TMQUEUE(5), tmconfig(1), ubbconfig(5)
1628
ERROR: TMSNAME must begin with TMS_QM
Description
The application is configured such that the TMQUEUE server is in a group in the GROUPS section that does not have the TMSNAME set to TMS_QM.
Action
Change the TUXCONFIG file to have the TMSNAME set to and reboot the TMQUEUE server.
See Also
TMQUEUE(5), tmconfig(1), ubbconfig(5)
1629
WARN: [Unable to verify that TMSNAME begins with TMS_QM]
Description
The TMQUEUE server was unable to verify that the TMSNAME for the group in the GROUPS section associated with TMQUEUE is set to TMS_QM (that is, it was unable to find the corresponding GROUPS entry).
Action
Contact BEA Customer Support.
See Also
TMQUEUE(5)
1630
ERROR: tpopen() failed, tperrno = tperrno
Description
While initializing the TMQUEUE server, tpopen() returned an error.
Action
Use the returned tperrno and check the userlog to determine what the error was. When the problem has been resolved, re-boot the server.
See Also
TMQUEUE(5)
1631
WARN: TMQUEUE received the wrong buffer type - type
Description
The TMQUEUE server received a message from an application program that was sent via tpcall or tpconnect instead of tpenqueue or tpdequeue. A failure message is returned to the originator.
Action
Re-write the application software or re-configuration the TUXCONFIG file so that messages are sent to the correct services using the correct primitives.
See Also
TMQUEUE(5), tpcall(3c), tpconnect(3c), tpdequeue(3c), tpenqueue(3c)
1633
ERROR: [Failed to get field fieldname from operation message]
Description
The TMQUEUE server could not get the specified field, fieldname, while performing the operation. The operation can be "tpenqueue" or "tpdequeue", and the fieldname can be "FLAGS", "QNAME", "CORRID", "FAILUREQ", "MSGID", "PRIORITY", "REPLYQ", or "TIME".
Action
The operation will fail. Contact BEA Customer Support.
See Also
qmadmin(1)
1634
WARN: [Failed to set field fieldname in operation message]
Description
The TMQUEUE server could not set the specified field, fieldname, in the reply message while performing the operation. The operation can be "tpenqueue" or "tpdequeue", and the fieldname can be "DIAGNOSTIC", "FLAGS", "CORRID", "FAILUREQ", "MSGID", "PRIORITY", or "REPLYQ".
Action
The operation will succeed but the associated information will not be passed back to the application from the tpenqueue or tpdequeue call. Contact BEA Customer Support.
See Also
TMQUEUE(5), tpdequeue(3c), tpenqueue(3c)
1637
ERROR: TMQUEUE cannot be a conversational server
Description
The application is configured such that the TMQUEUE server is a conversational server (that is, its entry in the configuration has "CONV=Y").
Action
Change the TUXCONFIG file to configure TMQUEUE as a request/response server (without CONV=Y) and reboot the TMQUEUE server.
See Also
TMQUEUE(5), tmconfig(1), ubbconfig(5)
1638
ERROR: Unable to re-enqueue message
Description
The TMQFORWARD server was run with the -n option which indicates that the forwarding is not being run within a transaction. In this case, the message was deleted from the queue, the associated service was called, the call failed, and the message cannot be put back on the queue.
Action
If the application cannot afford to lose messages, don't use the -n option on TMQFORWARD (atomicity can only be guaranteed within transactions).
See Also
TMQFORWARD(5)
1639
ERROR: TA_MAXPAGES can only be increased
Description
An /Admin API request attempted to change the number of pages allocated to a queue space by specifying that the number be decreased or remain the same. This is an invalid request; the number of pages can only be increased.
Action
To decrease the number of pages allocated to a queue space, the queue space must be deleted and then recreated with the desired number of pages. These operations will also delete all messages in the queue space unless the messages are first dequeued and then enqueued to another queue space.
See Also
APPQ_MIB(5)
1640
ERROR: Cannot update TA_MAXQUEUES after queue space is created
Description
An /Admin API request specified a change to the maximum number of queues in a queue space. This is an invalid request; the maximum number of queues cannot be changed after the queue space is created.
Action
To change the maximum number of queues in a queue space, the queue space must first be deleted and then recreated with the desired maximum number of queues. These operations will also delete all messages in the queue space unless the messages are dequeued and then enqueued to another queue space.
See Also
APPQ_MIB(5)
1642
ERROR: /Q error processing /Admin service request
Description
An error occurred during the processing of an /Admin API request. The cause of the error is recorded in the userlog on the machine where the queue space is located.
Action
Examine the userlog for more information.
See Also
APPQ_MIB(5)
1643
ERROR: Invalid attribute value on SET request
Description
The value specified on a SET request for the attribute indicated by the TA_BADFLD attribute in the reply buffer is invalid. Valid values for writable attributes are specified on the APPQ_MIB manual page for the appropriate class.
Action
Correct the attribute value in question to a valid value.
See Also
APPQ_MIB(5)
1644
ERROR: Device specified in TA_QMCONFIG does not exist
Description
The /Admin API request to create a new queue space failed because the device where the queue space is to be located does not exist.
Action
Create the device, then resubmit the request to create the queue space. The device can be created via the /Admin API (using SET NEW to create an object of the T_DEVICE class), or via the crdl command of qmadmin or tmadmin.
See Also
qmadmin(1), tmadmin(1), APPQ_MIB(5), TM_MIB(5)
1645
ERROR: Cannot update TA_APPQORDER after queue is created
Description
An /Admonish request attempted to change the order in which messages in the queue are to be processed. This is an invalid request; the order cannot be changed after the queue is created.
Action
To change the message processing order of a queue, the queue must be deleted and then recreated with the desired order. These operations will also delete all messages in the queue unless the messages are first moved to another queue.
See Also
APPQ_MIB(5)
1646
ERROR: Unable to determine license level
Description
An error occurred while retrieving the current license attributes.
Action
Contact BEA Customer Support.
1647
ERROR: No license for /Q
Description
You do not have a license to use /Q.
Action
Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact BEA Customer Support.
1648
ERROR: Unable to determine license level
Description
An error occurred while retrieving the current license attributes.
Action
Contact BEA Customer Support.
1649
ERROR: No license for /Q
Description
You do not have a license to use /Q.
Action
Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact BEA Customer Support.
1650
ERROR: Unable to determine license level
Description
An error occurred while retrieving the current license attributes.
Action
Contact BEA Customer Support.
1651
ERROR: No license for /Q
Description
You do not have a license to use /Q.
Action
Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact BEA Customer Support.
1654
WARN: -i option defaulted to 1 second
Description
A value of -i 0 was specified on the TMQFORWARD command line.
This value is invalid and the default value is set to a value of
one second.
Action
No action required. To eliminate the warning message, change
the argument to the -i option.
See Also
TMQFORWARD(5)
1655
ERROR: Unable to open file filename
Description
The TMQFORWARD program was unable to open the
file filename that was specified using the -q@filename
command line option.
Action
Check that filename is a valid file name and is readable by the Tuxedo administrator.
See Also
TMQFORWARD(5)
1656
ERROR: Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and for the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1657
ERROR: realloc() failed
Description
An attempt to dynamically re-allocate memory from the operating system using realloc() failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1658
WARN: File recursion not supported (val)
Description
While parsing a file with a list of queues, specified using the -q@ option
on the command line of TMQFORWARD, a queue name
was found that started with an at sign (@).
This is not allowed; it is not possible to specify a file name
within the file and queue names should not start with "@".
Action
Edit the queue file list and correct the queue name.
See Also
TMQFORWARD(5)
1660
ERROR: Can not malloc space
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed in TMQFORWARD trying to enqueue the reply. The current transaction is rolled back and the server will exit.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and for the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1661
ERROR: Can not malloc space
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed while dequeuing an application message.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and for the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1662
ERROR: Can not process the typed buffer
Description
The TMQFORWARD server failed to decode a message regarding the user data.
Action
Examine the userlog for other messages about the error. If necessary, contact the BEA TUXEDO system Administrator or BEA Customer Support.
1672
ERROR: Invalid time format
Description
While executing the qscan command, an invalid date and time value was specified.
Action
Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, day, hour, minute, and second).
See Also
qmadmin(1)
1673
ERROR: Invalid time format
Description
While executing the qscan command with a range of date/time values, an invalid date and time value was specified for the second value.
Action
Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second). A range of date/time values is two date/time values separated by a hyphen.
See Also
qmadmin(1)
1674
ERROR: Invalid delivery mode
Description
While executing the qscan command, an invalid delivery mode was specified.
Action
Re-enter the qscan command using a valid delivery mode. The value must be either "persist" or "nonpersist".
See Also
qmadmin(1)
1679
ERROR: Invalid high threshold type
Description
While executing the qcreate or qchange command, an invalid upper threshold value was specified for nonpersistent messages (the suffix was not valid). The threshold value must be a number suffixed with b (bytes), B (blocks), or % (percentage of queue space).
Action
Re-enter the qcreate or qchange command using an appropriate threshold value.
See Also
qmadmin(1)
1681
ERROR: Invalid high threshold number
Description
While executing the qcreate or qchange command, an upper threshold value of 0 was specified, or a percentage greater than 100 was given, for nonpersistent messages.
Action
Re-enter the qcreate or qchange command using an appropriate threshold value.
See Also
qmadmin(1)
1683
ERROR: High and low threshold types do not match
Description
While executing the qcreate or qchange command, the suffix on the upper threshold value doesn't match the suffix on the lower threshold value for nonpersistent messages.
Action
Re-enter the qcreate or qchange command using appropriate threshold values.
See Also
qmadmin(1)
1685
ERROR: Low threshold must be less than high threshold
Description
While executing the qcreate or qchange command, the lower threshold value is larger than the upper threshold value for nonpersistent messages.
Action
Re-enter the qcreate or qchange command using appropriate threshold values such that the lower value is less than the upper threshold value.
See Also
qmadmin(1)
 |
 |
 |