Q Messages 2200-2299
|
|
2202
ERROR: Invalid message type from BBL
Description
An invalid message was sent from the BBL process.
Action
Contact BEA Customer Support.
2203
ERROR: Process pid terminated abnormally
Description
A process within the queuing server group terminated abnormally.
Action
Shut down all processes connected to the queue space, including qmadmin. Restarting an administrative process that connects to the queue space will rebuild the queue space.
See Also
qmadmin(1)
2204
WARN: Error queue val is a temporary queue
Description
When creating a queue that is specified as the error queue for the queue space, it was created as a temporary queue. That means that if the machine goes down or the IPC resources for the queue space are removed, any messages on the error queue will be lost.
Action
No action required.
See Also
qmadmin(1)
2205
ERROR: xa_open() - no more message entries (max = max_entries)
Description
While opening the queue space for the first time after the machine has been booted or after the IPC resources have been removed, the queue space is warm started. During warm start, there were not enough message table entries.
Action
This could occur if the queue space message table size was changed to be smaller than the number of persistent messages in the queue space. Use the qspacechange command to increase the size of the message table.
See Also
qmadmin(1)
2210
ERROR: tpalloc() failed - server exiting
Description
An attempt to allocate a buffer in the TMQFORWARD process
has failed too many times.
Action
Check that your system has enough physical or virtual memory to complete the operation. If you believe your system has enough memory for the operation and that the malloc arena has not been corrupted by user code, contact BEA Customer Support.
See Also
TMQFORWARD
2211
ERROR: tpreturn could not send reply (val)
Description
TMQUEUE server failed to send reply for a request. This failure could occur if the ipc queue of the recipient is invalid. The recipient ipc queue can become invalid because the recipient has exited, or because the TMQUEUE is out of pending reply space or inter-process communication (IPC) resources.
Action
If the recipient has not exited check that your system has enough inter-process communication (IPC) resources configured to complete the operation. Otherwise contact BEA Customer Support.
2212
ERROR: tpreturn could not send reply (No Pending List Space)
Description
TMQUEUE server failed to send reply for a request. The TMQUEUE process failed to allocate memory to store the pending replies.
Action
Check that your system has enough physical or virtual memory to complete the operation. If you believe your system has enough memory for the operation, contact BEA Customer Support.
2213
ERROR: tpreturn could not send reply (val)
Description
TMQUEUE server failed to send reply for a request. An internal function call returned a failure.
Action
This is an internal error with no associated user action. If the error persists, contact BEA Customer Support.
2217
ERROR: The queue space is deadlocked, report code val,val
Description
Despite the locks being acquired in hierarchical order, two Queue servers have each other's locks. This should be impossible.
Action
Contact BEA Customer Support and report code val,val. Shut down *all* processes connected to the queue space, including qmadmin. The next time an administrative process connects to the queue space, the queue space will be rebuilt.
2218
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed in a queuing services operation.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2219
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed in a queuing services operation.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2220
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed in a queuing services operation.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2221
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed in a queuing services operation.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2222
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed in a queuing services operation.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2223
ERROR: failed to realize JMS filter plugin, interface 'val', implementation 'val', error code val
Description
The registry was unable to properly realize an implementation for the JMS filter plug-in.
Action
Ensure the registry is in a valid state. If the registry is valid and the implementation appears to be known to the system, contact BEA Customer Support.
2224
ERROR: memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed while trying to use a dequeue filter. The dequeue operation will fail.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
2225
ERROR: Invalid message properties
Description
A message has invalid properties. This message will be ignored by dequeue filters that reference message properties.
Action
Contact BEA Customer Support.
2227
WARN: Unable to invoke audit postop
Description
A call to the audit_postop() plugin security function on an
enqueue operation failed. This call was being attempted after
the operation execution. No audit of the completion of the operation
was able to be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the default supplied plugin, check the userlog file and filesystem space. If the plugin used is not the default supplied plugin, contact the supplier of the plugin code.
See Also
epifregedt, epifreg
2229
WARN: Unable to invoke audit postop
Description
A call to the audit_postop() plugin security function on a
dequeue operation failed. This call was being attempted after
the operation execution. No audit of the completion of the operation
was able to be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the default supplied plugin, check the userlog file and filesystem space. If the plugin used is not the default supplied plugin, contact the supplier of the plugin code.
See Also
epifregedt, epifreg
2230
WARN: Unable to invoke audit preop on service invocation
Description
A call to the audit_preop() plugin security function on an
enqueue operation failed. This call was being attempted prior to the operation
execution. No audit of the attempt was able to be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the default supplied plugin, check the userlog file and filesystem space. If the plugin used is not the default supplied plugin, contact the supplier of the plugin code.
See Also
epifregedt, epifreg
2231
WARN: Unable to invoke audit preop on service invocation
Description
A call to the audit_preop() plugin security function on a
dequeue operation failed. This call was being attempted prior to the operation
execution. No audit of the attempt was able to be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the default supplied plugin, check the userlog file and filesystem space. If the plugin used is not the default supplied plugin, contact the supplier of the plugin code.
See Also
epifregedt, epifreg
2234
ERROR: Double panic, scheduler can no longer NAK
Description
This should never happen. After detecting a problem in the queue space, the scheduler began filling in the failure return codes of outstanding requests, and then began to send out replies. Unfortunately, there was yet another failure in the course of the recovery action.
Action
There may be illegal references in the queue space. Shut down *all* processes connected to the queue space, including qmadmin. Then the next time an administrative process connects to the queue space, the queue space will be rebuilt.
2235
ERROR: Double panic, scheduler did not complete NAK
Description
This should never happen. After detecting a problem in the queue space, the scheduler began filling in the failure return codes of outstanding requests, and then began to send out replies. Unfortunately, there was yet another failure in the course of the recovery action.
Action
There may be illegal references in the queue space. Shut down *all* processes connected to the queue space, including qmadmin. Then the next time an administrative process connects to the queue space, the queue space will be rebuilt.
2236
ERROR: Scheduler insane, shutting down
Description
This should never happen. The scheduler has encountered an impossible condition and is terminating.
Action
There may be illegal references in the queue space. Shut down *all* processes connected to the queue space, including qmadmin. Then the next time an administrative process connects to the queue space, the queue space will be rebuilt.
2238
ERROR: xa_open() - the system time is val seconds older than the queue space time
Description
When opening (warm starting) a queue space, the current system time was found to be older than the queue space.
Action
Reset the system time val seconds forward.
2239
ERROR: val must be a non-negative number and less than or equal to val
Description
The value specified for val is not a valid numeric value or is too large.
Action
Change the value to be in the specified numeric range and re-run the operation.
2242
ERROR: unexpected transaction state, shutting down, values val, val
Description
The process encountered an unexpected return value.
Action
Contact BEA Customer Support.
2243
ERROR: unexpected transaction state, shutting down, values val, val
Description
The process encounted an unexpected return value.
Action
Contact BEA Customer Support.
2244
ERROR: The queue space hierarchy was matched, report code val,val
Description
This diagnostic message is for early debug prototypes and can not occur in production. The locks were acquired in an illegal order.
Action
Contact BEA Customer Support with the values.
2245
ERROR: The queue space hierarchy was violated, report code val,val
Description
This diagnostic message is for early debug prototypes and can not occur in production. The locks were acquired in an illegal order.
Action
Contact BEA Customer Support with the values.
2246
ERROR: discarding unreadable message
Description
The message was not produced by the system libraries, it is incorrectly formatted.
Action
Insure all programs are using supported APIs and have no stray values. Contact BEA Customer Support.
2248
WARN: -b option ignored. Argument is too large
Description
The argument for the -b option on the command line for TMQFORWARD is too large and is ignored.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -b option is an allowed numeric value >0 and < 32768.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
2249
WARN: -b option ignored as argument must be numeric
Description
The argument for the -b option on the command line for TMQFORWARD is non-numeric and is ignored.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -b option is a numeric value indicating the number of seconds that the server will timeout in forward mode.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
2250
WARN: tpsblktime failed - error message
Description
tpsblktime() functions failed.
Action
Contact your BEA TUXEDO System Technical Support.
2251
WARN: -b option ignored. Not in forwarded mode
Description
The argument for the -b option on the command line for TMQFORWARD can only be used with -f option.
Action
Change the server command line options, CLOPT, for the TMQFORWARD server so that the -b option is used only when the -f option specified.
See Also
TMQFORWARD(5), tmconfig(1), ubbconfig(5)
 |
 |
 |