|Skip Navigation Links|
|Exit Print View|
|Sun Network QDR InfiniBand Gateway Switch HTML Document Collection for Firmware Version 2.0|
Note - If you do not need either a primary or secondary Subnet Manager running on the gateway, you can skip this procedure and attach the data cables. See Attach the Data Cables.
Your InfiniBand fabric requires only one primary (or master) Subnet Manager, and it has the highest priority. If any other Subnet Managers exist, they are secondary Subnet Managers, and must have a lower priority. You must determine which gateway, switch, or InfiniBand device hosts the primary Subnet Manager, and if there are secondary Subnet Managers. If you have only one gateway in your InfiniBand fabric, and there are no Subnet Managers other than the one within the management controller, you do not need to set the Subnet Manager priority.
FabMan@gateway_name-> enablesm Starting IB Subnet Manager. [ OK ] Starting partitiond daemon. [ OK ] FabMan@gateway_name->
FabMan@gateway_name-> setsmpriority priority
where priority is 0 (lowest) to 13 (highest). For example, to set the Subnet Manager to priority 13:
FabMan@gateway_name-> setsmpriority 13 Current SM settings: smpriority 13 controlled_handover FALSE subnet_prefix 0xfe80000000000000 M_Key None FabMan@gateway_name->
FabMan@gateway_name-> disablesm Stopping partitiond daemon. [ OK ] Stopping IB Subnet Manager.. [ OK ] FabMan@gateway_name-> enablesm Starting IB Subnet Manager. [ OK ] Starting partitiond daemon. [ OK ] FabMan@gateway_name->