Skip navigation links

Oracle® Coherence Java API Reference
Release 3.7.1.0

E22843-01


com.tangosol.io
Class AbstractReadBuffer.AbstractBufferInput

java.lang.Object
  extended by java.io.InputStream
      extended by com.tangosol.io.AbstractReadBuffer.AbstractBufferInput

All Implemented Interfaces:
InputStreaming, ReadBuffer.BufferInput, java.io.Closeable, java.io.DataInput
Direct Known Subclasses:
AbstractByteArrayReadBuffer.ByteArrayBufferInput, ByteBufferReadBuffer.ByteBufferInput, MultiBufferReadBuffer.MultiBufferInput
Enclosing class:
AbstractReadBuffer

public class AbstractReadBuffer.AbstractBufferInput
extends java.io.InputStream
implements ReadBuffer.BufferInput

This is an implementation of the BufferInput interface that delegates its work back to its ReadBuffer.

This implementation extends InputStream, but only so that it can be passed to anything that takes an InputStream.


Constructor Summary
AbstractReadBuffer.AbstractBufferInput()
          Default constructor.

 

Method Summary
protected  void adjustOffsetInternal(int cb)
          Adjust the internal stream offset.
 int available()
          Returns the number of bytes that can be read (or skipped over) from this input stream without causing a blocking I/O condition to occur.
 void close()
          Close the InputStream and release any system resources associated with it.
protected  java.lang.String convertUTF(int of, int cb)
          Convert a UTF-8 encoded section of the binary stream into a String.
 ReadBuffer getBuffer()
          Get the ReadBuffer object that this BufferInput is reading from.
protected  char[] getCharBuf(int cchMax)
          Obtain a temp buffer used to avoid allocations when building Strings from UTF binary data.
protected  int getMarkInternal()
          Obtain the offset of the stream mark.
 int getOffset()
          Determine the current offset of this BufferInput within the underlying ReadBuffer.
 void mark(int cbReadLimit)
          Marks the current read position in the InputStream in order to support the stream to be later "rewound" (using the InputStreaming.reset() method) to the current position.
 boolean markSupported()
          Determine if this InputStream supports the ReadBuffer.BufferInput.mark(int) and InputStreaming.reset() methods.
 int read()
          Read the next byte of data from the InputStream.
 int read(byte[] ab)
          Read some number of bytes from the input stream and store them into the passed array ab.
 int read(byte[] ab, int of, int cb)
          Read up to cb bytes from the input stream and store them into the passed array ab starting at offset of.
 boolean readBoolean()
          Read a boolean value.
 ReadBuffer readBuffer(int cb)
          Read cb bytes and return them as a ReadBuffer object.
 byte readByte()
          Read a byte value.
 char readChar()
          Read a char value.
 double readDouble()
          Read a double value.
 float readFloat()
          Read a float value.
 void readFully(byte[] ab)
          Read ab.length bytes and store them in ab.
 void readFully(byte[] ab, int of, int cb)
          Read cb bytes and store them in ab starting at offset of.
 int readInt()
          Read an int value.
 java.lang.String readLine()
          Reads the next "line" of text.
 long readLong()
          Read a long value.
 int readPackedInt()
          Read an int value using a variable-length storage format as described by WriteBuffer.BufferOutput.writePackedInt(int).
 long readPackedLong()
          Read a long value using a variable-length storage format as described by WriteBuffer.BufferOutput.writePackedLong(long).
 java.lang.String readSafeUTF()
          Read a variable-length encoded UTF packed String.
 short readShort()
          Read a short value.
 int readUnsignedByte()
          Read an unsigned byte value.
 int readUnsignedShort()
          Read an unsigned short value.
 java.lang.String readUTF()
          Reads a String value.
protected  java.lang.String readUTF(int cb)
          Reads the specified-length UTF data and converts it to a String value.
 void reset()
          Rewind this stream to the position at the time the InputStreaming.mark(int) method was last called on this InputStream.
protected  void setMarkInternal(int of)
          Update the internal stream mark.
 void setOffset(int of)
          Specify the offset of the next byte to read from the underlying ReadBuffer.
protected  void setOffsetInternal(int of)
          Update the internal stream offset.
 long skip(long cb)
          Skips over up to the specified number of bytes of data from this InputStream.
 int skipBytes(int cb)
          Skips over up to the specified number of bytes of data.

 

Constructor Detail

AbstractReadBuffer.AbstractBufferInput

public AbstractReadBuffer.AbstractBufferInput()
Default constructor.

Method Detail

read

public int read()
         throws java.io.IOException
Read the next byte of data from the InputStream. The value byte is returned as an int in the range 0 to 255. If the end of the stream has been reached, the value -1 is returned.

This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Specified by:
read in interface InputStreaming
Specified by:
read in class java.io.InputStream
Returns:
the next byte of data, or -1 if the end of the stream has been reached
Throws:
java.io.IOException - if an I/O error occurs

read

public int read(byte[] ab)
         throws java.io.IOException
Read some number of bytes from the input stream and store them into the passed array ab. The number of bytes actually read is returned.

This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Specified by:
read in interface InputStreaming
Overrides:
read in class java.io.InputStream
Parameters:
ab - the array to store the bytes which are read from the stream
Returns:
the number of bytes read from the stream, or -1 if no bytes were read from the stream because the end of the stream had been reached
Throws:
java.io.IOException - if an I/O error occurs

read

public int read(byte[] ab,
                int of,
                int cb)
         throws java.io.IOException
Read up to cb bytes from the input stream and store them into the passed array ab starting at offset of. The number of bytes actually read is returned.

This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Specified by:
read in interface InputStreaming
Overrides:
read in class java.io.InputStream
Parameters:
ab - the array to store the bytes which are read from the stream
of - the offset into the array that the read bytes will be stored
cb - the maximum number of bytes to read
Returns:
the number of bytes read from the stream, or -1 if no bytes were read from the stream because the end of the stream had been reached
Throws:
java.io.IOException - if an I/O error occurs

skip

public long skip(long cb)
          throws java.io.IOException
Skips over up to the specified number of bytes of data from this InputStream. The number of bytes actually skipped over may be fewer than the number specified to skip, and may even be zero; this can be caused by an end-of-file condition, but can also occur even when there is data remaining in the InputStream. As a result, the caller should check the return value from this method, which indicates the actual number of bytes skipped.
Specified by:
skip in interface InputStreaming
Overrides:
skip in class java.io.InputStream
Parameters:
cb - the maximum number of bytes to skip over
Returns:
the actual number of bytes that were skipped over
Throws:
java.io.IOException - if an I/O error occurs

available

public int available()
              throws java.io.IOException
Returns the number of bytes that can be read (or skipped over) from this input stream without causing a blocking I/O condition to occur. This method reflects the assumed implementation of various buffering InputStreams, which can guarantee non-blocking reads up to the extent of their buffers, but beyond that the read operations will have to read from some underlying (and potentially blocking) source.

BufferInput implementations must implement this method to return the extent of the buffer that has not yet been read; in other words, the entire un-read portion of the buffer must be available.

Specified by:
available in interface InputStreaming
Specified by:
available in interface ReadBuffer.BufferInput
Overrides:
available in class java.io.InputStream
Returns:
the number of bytes that can be read from this InputStream without blocking
Throws:
java.io.IOException - if an I/O error occurs

close

public void close()
           throws java.io.IOException
Close the InputStream and release any system resources associated with it.

BufferInput implementations do not pass this call down onto an underlying stream, if any.

Specified by:
close in interface InputStreaming
Specified by:
close in interface ReadBuffer.BufferInput
Specified by:
close in interface java.io.Closeable
Overrides:
close in class java.io.InputStream
Throws:
java.io.IOException - if an I/O error occurs

mark

public void mark(int cbReadLimit)
Marks the current read position in the InputStream in order to support the stream to be later "rewound" (using the InputStreaming.reset() method) to the current position. The caller passes in the maximum number of bytes that it expects to read before calling the InputStreaming.reset() method, thus indicating the upper bounds of the responsibility of the stream to be able to buffer what it has read in order to support this functionality.

BufferInput implementations ignore the cbReadLimit; they must support an unlimited read limit, since they appear to the user as an input stream on top of a fully realized read buffer.

Specified by:
mark in interface InputStreaming
Specified by:
mark in interface ReadBuffer.BufferInput
Overrides:
mark in class java.io.InputStream
Parameters:
cbReadLimit - the maximum number of bytes that caller expects the InputStream to be able to read before the mark position becomes invalid

reset

public void reset()
           throws java.io.IOException
Rewind this stream to the position at the time the InputStreaming.mark(int) method was last called on this InputStream. If the InputStream cannot fulfill this contract, it should throw an IOException.
Specified by:
reset in interface InputStreaming
Overrides:
reset in class java.io.InputStream
Throws:
java.io.IOException - if an I/O error occurs, for example if this has not been marked or if the mark has been invalidated

markSupported

public boolean markSupported()
Determine if this InputStream supports the ReadBuffer.BufferInput.mark(int) and InputStreaming.reset() methods.

BufferInput implementations must support the ReadBuffer.BufferInput.mark(int) and InputStreaming.reset() methods, so this method always returns true.

Specified by:
markSupported in interface InputStreaming
Specified by:
markSupported in interface ReadBuffer.BufferInput
Overrides:
markSupported in class java.io.InputStream
Returns:
true if this InputStream supports the mark and reset method; false otherwise

readFully

public void readFully(byte[] ab)
               throws java.io.IOException
Read ab.length bytes and store them in ab.

This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Specified by:
readFully in interface ReadBuffer.BufferInput
Specified by:
readFully in interface java.io.DataInput
Parameters:
ab - the array to store the bytes which are read from the stream
Throws:
java.io.EOFException - if the stream is exhausted before the number of bytes indicated by the array length could be read
java.io.IOException - if an I/O error occurs

readFully

public void readFully(byte[] ab,
                      int of,
                      int cb)
               throws java.io.IOException
Read cb bytes and store them in ab starting at offset of.

This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Specified by:
readFully in interface ReadBuffer.BufferInput
Specified by:
readFully in interface java.io.DataInput
Parameters:
ab - the array to store the bytes which are read from the stream
of - the offset into the array that the read bytes will be stored
cb - the maximum number of bytes to read
Throws:
java.io.EOFException - if the stream is exhausted before the number of bytes indicated by the array length could be read
java.io.IOException - if an I/O error occurs

skipBytes

public int skipBytes(int cb)
              throws java.io.IOException
Skips over up to the specified number of bytes of data. The number of bytes actually skipped over may be fewer than the number specified to skip, and may even be zero; this can be caused by an end-of-file condition, but can also occur even when there is data remaining to be read. As a result, the caller should check the return value from this method, which indicates the actual number of bytes skipped.
Specified by:
skipBytes in interface ReadBuffer.BufferInput
Specified by:
skipBytes in interface java.io.DataInput
Parameters:
cb - the maximum number of bytes to skip over
Returns:
the actual number of bytes that were skipped over
Throws:
java.io.IOException - if an I/O error occurs

readBoolean

public boolean readBoolean()
                    throws java.io.IOException
Read a boolean value.

This method is the counterpart for the DataOutput.writeBoolean(boolean) method.

Specified by:
readBoolean in interface ReadBuffer.BufferInput
Specified by:
readBoolean in interface java.io.DataInput
Returns:
either true or false
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readByte

public byte readByte()
              throws java.io.IOException
Read a byte value.

This method is the counterpart for the DataOutput.writeByte(int) method.

Specified by:
readByte in interface ReadBuffer.BufferInput
Specified by:
readByte in interface java.io.DataInput
Returns:
a byte value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readUnsignedByte

public int readUnsignedByte()
                     throws java.io.IOException
Read an unsigned byte value.

This method is the counterpart for the DataOutput.writeByte(int) method when it is used with unsigned 8-bit values.

Specified by:
readUnsignedByte in interface ReadBuffer.BufferInput
Specified by:
readUnsignedByte in interface java.io.DataInput
Returns:
an int value in the range 0x00 to 0xFF
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readShort

public short readShort()
                throws java.io.IOException
Read a short value.

This method is the counterpart for the DataOutput.writeShort(int) method.

Specified by:
readShort in interface ReadBuffer.BufferInput
Specified by:
readShort in interface java.io.DataInput
Returns:
a short value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readUnsignedShort

public int readUnsignedShort()
                      throws java.io.IOException
Read an unsigned short value.

This method is the counterpart for the DataOutput.writeShort(int) method when it is used with unsigned 16-bit values.

Specified by:
readUnsignedShort in interface ReadBuffer.BufferInput
Specified by:
readUnsignedShort in interface java.io.DataInput
Returns:
an int value in the range of 0x0000 to 0xFFFF
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readChar

public char readChar()
              throws java.io.IOException
Read a char value.

This method is the counterpart for the DataOutput.writeChar(int) method.

Specified by:
readChar in interface ReadBuffer.BufferInput
Specified by:
readChar in interface java.io.DataInput
Returns:
a char value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readInt

public int readInt()
            throws java.io.IOException
Read an int value.

This method is the counterpart for the DataOutput.writeInt(int) method.

Specified by:
readInt in interface ReadBuffer.BufferInput
Specified by:
readInt in interface java.io.DataInput
Returns:
an int value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readLong

public long readLong()
              throws java.io.IOException
Read a long value.

This method is the counterpart for the DataOutput.writeLong(long) method.

Specified by:
readLong in interface ReadBuffer.BufferInput
Specified by:
readLong in interface java.io.DataInput
Returns:
a long value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readFloat

public float readFloat()
                throws java.io.IOException
Read a float value.

This method is the counterpart for the DataOutput.writeFloat(float) method.

Specified by:
readFloat in interface ReadBuffer.BufferInput
Specified by:
readFloat in interface java.io.DataInput
Returns:
a float value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readDouble

public double readDouble()
                  throws java.io.IOException
Read a double value.

This method is the counterpart for the DataOutput.writeDouble(double) method.

Specified by:
readDouble in interface ReadBuffer.BufferInput
Specified by:
readDouble in interface java.io.DataInput
Returns:
a double value
Throws:
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

readLine

public java.lang.String readLine()
                          throws java.io.IOException
Reads the next "line" of text.

This method does not have a counterpart in the DataOutput interface. Furthermore, this method is defined as operating on bytes and not on characters, and thus it should be selected for use only after careful consideration, as if it were deprecated (which it has been in java.io.DataInputStream).

Specified by:
readLine in interface ReadBuffer.BufferInput
Specified by:
readLine in interface java.io.DataInput
Returns:
a line of text as a String
Throws:
java.io.IOException - if an I/O error occurs.

readUTF

public java.lang.String readUTF()
                         throws java.io.IOException
Reads a String value.

This method is the counterpart for the DataOutput.writeUTF(java.lang.String) method.

Specified by:
readUTF in interface ReadBuffer.BufferInput
Specified by:
readUTF in interface java.io.DataInput
Returns:
a String value
Throws:
java.io.UTFDataFormatException - if the bytes that were read were not a valid UTF-8 encoded string
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

getBuffer

public ReadBuffer getBuffer()
Get the ReadBuffer object that this BufferInput is reading from.
Specified by:
getBuffer in interface ReadBuffer.BufferInput
Returns:
the underlying ReadBuffer object

readSafeUTF

public java.lang.String readSafeUTF()
                             throws java.io.IOException
Read a variable-length encoded UTF packed String. The major differences between this implementation and DataInput is that this supports null String values and is not limited to 64KB UTF-encoded values.
Specified by:
readSafeUTF in interface ReadBuffer.BufferInput
Returns:
a String value; may be null
Throws:
java.io.IOException - if an I/O error occurs

readPackedInt

public int readPackedInt()
                  throws java.io.IOException
Read an int value using a variable-length storage format as described by WriteBuffer.BufferOutput.writePackedInt(int).
Specified by:
readPackedInt in interface ReadBuffer.BufferInput
Returns:
an int value
Throws:
java.io.IOException - if an I/O error occurs

readPackedLong

public long readPackedLong()
                    throws java.io.IOException
Read a long value using a variable-length storage format as described by WriteBuffer.BufferOutput.writePackedLong(long).
Specified by:
readPackedLong in interface ReadBuffer.BufferInput
Returns:
a long value
Throws:
java.io.IOException - if an I/O error occurs

readBuffer

public ReadBuffer readBuffer(int cb)
                      throws java.io.IOException
Read cb bytes and return them as a ReadBuffer object.
Specified by:
readBuffer in interface ReadBuffer.BufferInput
Parameters:
cb - the number of bytes to read
Returns:
a ReadBuffer object composed of cb bytes read from the BufferInput
Throws:
java.io.EOFException - if the stream is exhausted before the number of bytes indicated could be read
java.io.IOException - if an I/O error occurs

getOffset

public int getOffset()
Determine the current offset of this BufferInput within the underlying ReadBuffer.
Specified by:
getOffset in interface ReadBuffer.BufferInput
Returns:
the offset of the next byte to read from the ReadBuffer

setOffset

public void setOffset(int of)
Specify the offset of the next byte to read from the underlying ReadBuffer.
Specified by:
setOffset in interface ReadBuffer.BufferInput
Parameters:
of - the offset of the next byte to read from the ReadBuffer

setOffsetInternal

protected void setOffsetInternal(int of)
Update the internal stream offset.
Parameters:
of - the new offset

adjustOffsetInternal

protected void adjustOffsetInternal(int cb)
Adjust the internal stream offset.
Parameters:
cb - the number of bytes that were written

getMarkInternal

protected int getMarkInternal()
Obtain the offset of the stream mark.
Returns:
the offset of the mark or -1 if unmarked

setMarkInternal

protected void setMarkInternal(int of)
Update the internal stream mark.
Parameters:
of - the offset of the new mark

getCharBuf

protected char[] getCharBuf(int cchMax)
Obtain a temp buffer used to avoid allocations when building Strings from UTF binary data.
Parameters:
cchMax - the length that the String will not exceed
Returns:
a char buffer of at least the specified length

readUTF

protected java.lang.String readUTF(int cb)
                            throws java.io.IOException
Reads the specified-length UTF data and converts it to a String value.
Parameters:
cb - the number of bytes that the UTF data takes up in the stream; a value less than zero indicates a null value
Returns:
a String value; may be null if the passed length could be negative
Throws:
java.io.UTFDataFormatException - if the bytes that were read were not a valid UTF-8 encoded string
java.io.EOFException - if the value could not be read because no more data remains to be read
java.io.IOException - if an I/O error occurs

convertUTF

protected java.lang.String convertUTF(int of,
                                      int cb)
                               throws java.io.IOException
Convert a UTF-8 encoded section of the binary stream into a String.
Parameters:
of - the offset within the stream
cb - the length in bytes within the stream
Returns:
the String value
Throws:
java.io.IOException - if an I/O or conversion exception occurs, such as UTFDataFormatException

Skip navigation links

Oracle® Coherence Java API Reference
Release 3.7.1.0

E22843-01


Copyright © 2000, 2011, Oracle and/or its affiliates. All rights reserved.