This section includes information about the following topics.
Scale of 2:
Value must be less than 10,000,000,000,000.00
Value must be greater than -10,000,000,000,000.00
Scale of 5:
Value must be less than 10,000,000,000.00000
Value must be greater than -10,000,000,000.00000
Imaging uses Oracle Outside In Technology which requires certain libraries to be installed that are not part of Imaging. These libraries must be installed on the Imaging server, Content Server, and client machines using the advanced viewer mode, regardless of the machine platform. For more information on what libraries are required for each platform and how to obtain, install, and configure them, see the Oracle WebCenter Content Installation Guide.
When a search is executed on an application with a number field that returns hits with documents with nothing entered in a number field, either a 0 or a -1 appears in the field. When an application containing documents is modified to have a number field, the search returns -1 for those documents. When a document is uploaded and the number field is left blank, the search returns 0. If a search is executed with the number field as a condition, they are treated as empty fields and when viewed in Content Server, the fields are empty.
The null number field issue is a result of Content Server functionality.
By default, the maximum document size that will be indexed is 10MB. This is changed by setting the MaxIndexableFileSize configuration variable in the Content Server repository. The default is
MaxIndexableFileSize=10485760. If larger documents require full-text indexing, the value of MaxIndexableFileSize should be increased.
Each Imaging application that is created increases the structure complexity of the underlying Content Server repository. Imaging monitors multiple factors to estimate when then structure complexity of its Content Server might be hampering its performance. Once that threshold is exceeded, the Imaging system will consider the Content Server to be full and no longer allow the creation of new applications. The factors used to calculate fullness are configurable and are listed below. This fullness is a reflection of structural complexity of the Content Server, not its ability to continue to accept additional documents. To resolve fullness issues the configuration values below can be adjusted, provided the Content Server system continues to perform well, or an additional Content Server installation can be used to contain new Imaging applications.
The number of security groups exceeds the value of the environment variable IpmMaxGroupLimit.
The number of roles assigned permission to security groups exceeds the value of the environment variable IpmMaxGroupRoleLimit.
The number of metadata fields exceeds the value of the environment variable IpmMaxMetadataFields.
The Content Server configuration setting IpmRepositoryForceFull=True
Setting IpmRepositoryForceFull equal to True allows you to configure Content Server to identify itself as full to Imaging in order to prevent additional applications from being created. This does not prevent documents from being uploaded.
To get additional space for applications, do one of the following:
Install an additional independent WebCenter Content system and define a new connection to it in Imaging. For information on how to configure a an additional Content Server repository, see the Oracle WebCenter Content System Administrator's Guide for Content Server.
Increase the values of the IpmMaxGroupRoleLimit and IpmMaxMetadataFields environment variables by editing the config.cfg file directly or by using the Content Server administrative server. For more information about changing Content Server environment variables, see the Oracle WebCenter Content System Administrator's Guide for Content Server.
You can also change these environment variable values in the config.cfg file for your Content Server Repository. For more information, see the Oracle WebCenter Content System Administrator's Guide for Content Server.
Documents with text content require the fonts necessary to render the document to be available to the Oracle Outside In rendering engine, which uses TrueType fonts. Fonts are not provided by Oracle. If the font used in a document is not available to Oracle Outside In, then a suitable substitute will be used. Font substitutions can cause a document to be unreadable, create incorrect text formatting, or cause shifting of data or repagination on text documents, including potentially exposing redacted content.
Indicators of font problems are when a document renders properly in the advanced Viewer mode but not the basic Viewer mode, or if TIFF documents display properly but rendered Microsoft Office documents do not.
To ensure that proper fonts are used when rendering documents, the administrator should install them to the client and server system. The server MBean GdFontPath should be set to the directory where the fonts are installed. For more information on setting MBeans, see Section 3.9.1, "Configuring MBeans."
When using the advanced viewer mode on Linux systems, the fonts can be installed and the environment variable GDFONTPATH set to that directory. If the environment variable is not found, the user will be prompted for that path the first time the advanced viewer mode is used. In cases where an attempt to download a document as a TIFF before the path is set, an error may occur that prevents downloading the TIFF rendition.
If the input agent will not pick up input files, try the following steps to determine a solution.
Check the settings of the following Imaging MBeans:
CheckInterval: Make sure this is set to a reasonable amount of time for your environment (for example, maybe 1 minute for test systems or 30 minutes for production systems that do not need to get data right away) and ensure that enough time has expired for at least one polling interval to have occurred.
InputDirectories: Examine the list of directories and ensure that they are the correct directories where the input files are stored.
Ensure that the input file has Read/Write permissions for WebLogic Server.
Check the permissions on the input directory paths and make sure they are accessible to the user that is running the WLS managed server.
Look at the input definition in the user interface and make sure the input that is supposed to be processing is marked online and that the input file mask matches the files that are in the directory.
If the input agent is still not running then examine the log files to see if an error was encountered that is preventing the agent from functioning.
Auto-detect does not work if the provided sample file is not large enough to get an accurate determination of the character set. If the sample file is too small, disable Auto-detect input file character set and manually select the character set.
For the steps below, refer to the following directory structure:
Input - Errors – Processed — YYYY-MM-DD – Samples – Stage
Look at the Errors directory in which the input file was placed and see if an error file was created. If an error file exists, then open it and examine the last column of the file to determine the specific error.
Examine the input file and verify that the path to the image file is accessible to the user that is running the Imaging managed server and that the user has permissions to the path and image files.
Copy one of the failing input files to the samples directory and load it into the input definition editor UI. Verify that the mappings are correct and that one of the columns has not shifted.
Finally, look at the Imaging log file and examine the errors that are listed for the individual lines to determine the exact cause of the problems.
Once you have determined the cause of the error and are able to correct it, copy the corrected input file back into the input directory. For additional information, see Section 9.5, "Checking Results and Error Files."
In cases where the advanced viewer applet experiences transformation errors, the first response is to delete temporary files on the user's workstation. Doing so will remove the distribution of Oracle Outside In files which will cause a new deployment next time the applet is used. In a Windows environment, do the following to clear temporary files:
Select Java from the Windows Control Panel options.
Click Settings under Temporary Internet Files.
Cick Delete Files.
Close the Java control panel.
In Windows Explorer, navigate to the user's temporary file location. For example, c:\users\<user-id>\AppData\Local\Temp\oracle\imaging\imaging-client
Delete the files in the imaging-client directory.
Use the browser's options to delete its temporary internet files.
Use the Windows Disk Clean Up tool to clean any other temporary files.
The Advanced Viewer and Basic Viewer modes render Group 6 and Group 7 TIFFs, however, Group 6 TIFFs are supported only when the viewer cache is enabled. Group 6 TIFFs are not supported on non-cache systems. See Section 3.4, "Configuring Viewer Cache Options" for more information on how to configure the viewer cache options. Group 7 TIFFs must conform to the TIFF standard for JPEG compression. Color images should use YCbCr for photometric interpretation or the image will be treated as a grayscale image. YCbCr is the standard color for JPEG images.
By default, not all exceptions caught within Imaging are logged. In the event that all exceptions need to be monitored, the following steps will help identify all exceptions thrown. Imaging exception handlers do not inherit a log level from a parent logger (oracle.imaging.service). To get exceptions from the core Imaging services, you must explicitly set the logger named oracle.imaging.service.exceptions.To enable some degree of flexibility, it uses the following log levels:
ERROR 1(SEVERE): Logs SYSTEM and DATABASE ImagingExceptions
NOTIFICATION(INFO): Logs SYSTEM, DATABASE, and SECURITY ImagingExceptions
TRACE(FINE): Logs SYSTEM, DATABASE, SECURITY, and USAGE ImagingExceptions
For example, all ImagingExceptions would be logged at throw time by setting oracle.imaging.service.exceptions to TRACE:32.
When investigating events in Imaging, start with the Imaging log files. In cases where the event occurs in Content Server, reviewing the Content Server log files may provide additional information. Both Imaging and Content Server logs can be viewed in Oracle Enterprise Manager. The Content Server logs can also be viewed from the Content Server administrative links.
Tracing sections can be enabled in Content Server for more or less detail in the logging information. The IpmRepository component installed into Content Server does not generate its own logging, but includes entries into the standard Content Server logs. Turn on tracing for the section named ipmrepos in Content Server for detailed logging information of the IpmRepository component. For more information about Content Server logging, see Oracle WebCenter Content System Administrator's Guide for Content Server "Finding Error and Status Information."
Oracle Dynamic Monitoring Service (DMS) can display statistics of your system using the Oracle DMS Spy application to aid in troubleshooting and diagnostics. The Oracle DMS Spy application is launched by entering http://machine_name:port/dms/ into your browser URL address field. The following metric tables are available:
Records timing statistics on imaging API operations. Statistics are recorded on a per service operation basis.
Records general system activity. Counts of system activity occurrences are recorded including:
Records workflow process instance injection statistics on a per imaging application basis.
Records input process instance statistics on a per imaging input basis
Records detailed metrics on the rendering subsystem including details on:
Records detailed metrics on repository calls.
Records Imaging search execution timings. Statistics are recorded on a per search definition basis.
Records detailed metrics on requests to Universal Content Server.
Records timing for AXF (Oracle Application Adapters for ECM) operations in the system infrastructure, commands, and user interface.
Records timing for AXF (Oracle Application Adapters for ECM) operations which communicate to the workflow server.
If documents are deleted from Imaging, administrators can view the entry for the delete action in the Content Server DocumentHistory table. This is the only place for administrators to view audit entries for deleted documents.
A nested stack error, also called a nested exception, is basically an error that has been wrapped by another error, which is standard with Java and other languages to help provide more context to the issue. You can usually find the nested exception by locating the caused by string in the stack trace as shown in bold in the following example. If there is not enough information provided by the Imaging error, look deeper into the error message to see if other components are involved. Imaging uses nested stack errors to display repository related problems, workflow issues, or problems caused by other components. After you locate the possible initial error, check the diagnostic logs for more troubleshooting information.
In the following example, the TCM-00787 error is occurring because the default provider within the Content Server repository was corrupted and reset (see boldface text).
[2009-06-11T09:56:21.720-07:00] [ipm_server1] [ERROR]  [oracle.imaging.ui.backing.application.LifecycleState] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000I7GFuQ9F8DT6uBj8EH1AC2Ut0000WK,0] [APP: imaging#220.127.116.11.0] IPM UI Exception[[ oracle.imaging.ImagingException: TCM-00787: A repository error has occurred. Contact your system administrator for assistance. stackTraceId: 9-1244739381674 faultType: SYSTEM faultDetails: ErrorCode = oracle.stellent.ridc.protocol.ServiceException, ErrorMessage = File '/app/stellent/content/10gR3/proxy1/data/providers/defaultfilestore/provider.hda' does not exist. at oracle.imaging.repository.ucm.UcmErrors.convertRepositoryError(UcmErrors.java:108) at oracle.imaging.repository.ucm.UcmLifecycleOperationImpl.getStorageRules(UcmLifecycleOperationImpl.java:58) ... <...snip...> at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.stellent.ridc.protocol.ServiceException: File '/app/stellent/content/10gR3/proxy1/data/providers/defaultfilestore/provider.hda'does not exist. at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116) at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92) at oracle.imaging.repository.ucm.UcmResponse.<init>(UcmResponse.java:61) at oracle.imaging.repository.ucm.UcmRequest.makeOneServiceCall(UcmRequest.java:310) at oracle.imaging.repository.ucm.UcmRequest.makeServiceCallWithRetries(UcmRequest.java:228) at oracle.imaging.repository.ucm.UcmRequest.makeServiceCall(UcmRequest.java:210) at oracle.imaging.repository.ucm.UcmLifecycleOperationImpl.getStorageRules(UcmLifecycleOperationImpl.java:53) ... 234 more
When using Oracle Single Sign On, POST requests to WebLogic Server will return an internal server error when the Imaging session has expired. Refreshing the page returns to the Imaging log in page for reauthentication to start a new session.
When using Content Server 10g, the BPEL payload is populated with the incorrect date when the date is less than 1969 or greater than 2068. As a workaround, it is recommended that if you are using dates that fall outside the range of 1969-2068, use four digit years for the date. You can set this using the Content Server System Properties utility.
Users that are getting a host name or IP address that they don't expect for the document URL probably need to configure the Listener Address in their WLS server. This can be done either by setting listen-address in config.xml for the WLS server, or by using the WLS console. To use the console, expand Environment and click Servers in the Domain Structure window. In the Servers Configuration tab, click on the desired server name. Set Listen Address on this page. Restart WLS. For more information about WLS configuration, see Oracle Fusion Middleware Administrator's Guide.
Adding a metadata field to an Content Server instance using Configuration Manager can cause problems if the field is set as required but no default value is specified. Any metadata fields set as required in Content Server that do not have default values specified in Content Server prevents Imaging from creating documents on the Content Server instance. Administrators can prevent issues within Imaging by either setting a default value for the metadata field or by using Content Server profiles to address the field.
To view documents on a UNIX operating system, you must ensure that library path and display environment variables are properly set. For more information, see the section on setting a library path in an environment variable on a UNIX platform in the Oracle WebCenter Content Installation Guide.
In some situations, Content Server may return a document in a search result that the user does not have View rights to in the application. If the user tries to view the document in the Viewer, a blank page is presented instead. This occurs when a user is mapped to the admin group in Oracle Internet Directory, which is then mapped to the admin role in Content Server. Users having the admin role in Content Server have rights to all security groups in Content Server. When a user having the admin role in Content Server uses an Imaging search, all documents matching the search criteria are returned in the search result, even if the user does not have View rights to the documents. Attempting to view a document to which the user does not have the Imaging View right defined in the associated Imaging application presents a blank page.
The Imaging advanced viewer is a Java applet that needs to submit cookies in its requests to authenticate a session and properly display documents. If a system is configured to limit cookies to HTTP only requests, the Viewer cannot authenticate and so the HTML login form is displayed instead of the requested document. To allow the advanced viewer applet to authenticate properly, cookies cannot be limited to HTTP only requests.
If Imaging is integrated with Oracle Access Manager and the /imaging directory is incorrectly configured as protected, a magic number error is reported by the Viewer in advanced mode. To correct this, ensure that Oracle Access Manager is properly configured to protect the /imaging/faces directory. For more information, see Section 2.3.5, "Integrating Imaging With Oracle Access Manager 11g" and Section 2.3.6, "Integrating Imaging With Oracle Access Manager 10g".
If an invalid value is set in the DefaultColorSet MBean, or if a user has specified a UI skin in their preferences that has been deprecated when Imaging is upgraded, then a generic user interface is displayed when the user logs in. The generic interface has a larger font and does not display a logo. Correcting the invalid value of the DefaultColorSet MBean or applying a current skin from the User Preference page corrects the problem.
When running Imaging in an Exalogic environment with Solaris 11g, you must set the display environment variable in order for the Imaging Viewer to work properly in basic mode. To set the display variable, do the following:
Open a new terminal and run the command xhost +.
In the IPM_server terminal, set the DISPLAY environment variable.
Restart the Imaging server.
Sticky note properties do no display properly when using JRE 1.6.0_26. Ensure that all clients needing access to sticky notes when using the advanced viewing mode are using JRE 1.6.0_27 or higher.
Printing large documents (documents approaching or exceeding 100 pages, or documents set to a resolution of 300 DPI or above) requires additional memory resources. These additional resource requirements can affect both servers and clients.
Depending on the current Java Virtual Machine memory configuration for the Imaging server, the need for additional resources may cause an out of memory error. Increasing the Java Virtual Machine maximum heap size to the Imaging server during start up can help avoid memory errors. Specify the minimum and maximum heap size by passing the parameter -Xms<size> and -Xmx<size> to the Imaging server during start up, where <size> is the amount of memory in megabytes or gigabytes you want to allocate to the Imaging server. See the section JVM Parameters in the Oracle Fusion Middleware Command Reference for Oracle WebLogic Server for more information on setting the Java Virtual Machine parameters.
Each of the different browsers handles the increased resource demands uniquely. In some cases, when printing documents that require additional resources, the document may print with blank pages, fail to respond, or require the browser or computer to be restarted.
A workaround for this problem may be to download the document locally and then print it. If the document does not have any annotations or the document is to be printed without annotations, the original document can be downloaded and printed. However, if a document is to be printed with annotations, a TIFF version of the document can be downloaded and printed.
When loading large documents (documents approaching or exceeding 1000 pages, or documents set to a resolution of 192 DPI or above), a cache exception may be thrown in the Imaging Viewer. In such cases, the transaction timeout of the RenderAgent EJB should be set to 300 seconds in the WLS Administration Console. If the exception occurs even after increasing the transaction timeout to 300 seconds, it should be increased further in steps of 120 seconds.
To set the transaction timeout of the RenderAgent EJB:
Open the WebLogic Server Administration Console and click Deployments.
Select the Imaging deployment to open the details for Imaging.
Under Modules and Components, select the RenderAgent EJB.
Click the Configuration tab.
Set the Transaction Timeout to 300 seconds.
Click Save to save the configuration settings.
When a business rules package created and uploaded with a new payload schema is deleted, associated files that were generated in the custom payload directory are not deleted. These files need to be deleted manually by the system administrator when the business rules package associated with these files is deleted.
There is a known limitation with the advanced viewer mode when loading documents rendered with a high cache resolution setting (typically 300 DPI or above) and a high viewer zoom level (typically 175% or more) on a system with viewer cache enabled. In such cases, a java heap error may be generated and the document will not be viewable in the Imaging viewer. As a workaround, it is recommended to use the download option to open the document locally.
There is a known issue with opening documents in the advanced viewer mode when using Internet Explorer 9 and a Java Runtime Environment version older than 1.6.0_24. As a workaround, it is recommended to install the latest version of Java or Java Runtime Environment version 1.6.0_24 or higher.
When using a Java Runtime Environment version 1.6.0_24 or higher, copying or pasting text to/from the clipboard is security sensitive and depends on how the security policy is defined on the client machine.
To enable copying or pasting text to/from the clipboard into text and sticky note annotations in the Imaging viewer, follow these steps:
Navigate to the jre\lib\security directory under the Java installation directory on the client machine. For example,
Edit the java.policy file by adding the following text to "standard" properties that can be read by anyone:
permission java.awt.AWTPermission "accessClipboard";
Restart the browser for the changes to take effect.
In some situations, the Imaging viewer may not work in the advanced mode after upgrading from one Imaging patch set to another or after applying an Imaging patch. To resolve this problem, clear the Java cache and browser history on the client machine. See the java.com website for more information on how to clear the Java cache. Note that the Java cache is an independent cache from the browser's cache.