Oracle® Fusion Middleware Messages for Oracle Service Bus
11g Release 1 (11.1.1.7)

E15034-09

Back to Index Page


OSB Transform Subsystem Messages

The OSB Transform catalog contains messages in the range BEA382500 - BEA382599. Messages in this catalog are part of the stages.transform.messages Internationalization package and the stages.transform.messages Localization package.

BEA-382500

Error: OSB Service Callout action received SOAP Fault response

Description

OSB Service Callout action has received a SOAP Fault response from the web service that was invoked. The contents of the received SOAP Fault can be seen in the details element of $fault message context variable.

BEA-382501

Error: OSB Service Callout action received an unrecognized response

Description

The service invoked by OSB Service Callout action has returned payload that was not consistent with the declared service binding type and as a result could not be properly parsed by OSB. For example, this can happen if a service that was registered with XML binding type, returned non well-formed XML payload. The contents of the received response can be seen in the details element of $fault message context variable.

Action

Check the contents of response payload in $fault variable to see why it is inconsistent with the declared service binding type

BEA-382502

Error: OSB Service Callout action received an error response

Description

The service invoked by OSB Service Callout action has indicated that an error condition other than a SOAP fault has occured. For example, this may happen when an HTTP 404 (Page Not Found) error code is received from an external HTTP service. The contents of the received response (if any) can be seen in the details element of $fault message context variable.

Action

Check the contents of response payload in $fault variable to see what the problem with service invocation is

BEA-382505

Error: OSB Validate action failed validation

Description

The input expression has failed validation according to provided schema resource. The details of the validation error, such as specific error message, location of the invalid XML, etc. can be seen in the details element of $fault message context variable

Action

Check the contents of $fault variable to see the source of the validation failure

BEA-382510

Error: OSB Assign action failed updating variable "variable": msg

Description

There was an error during the evaluation of XQuery/XSLT expression during the execution of Assign action. This could happen if an XQuery expression the result of which is being assigned to a variable, results in a runtime error from the XQuery evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XQuery expression for potential syntactic or semantic problems

BEA-382511

Error: OSB Delete action failed updating variable "variable": msg

Description

There was an error during the execution of Delete action. This could happen if the specified XPath expression is not a valid expression or results in a runtime error from XPath evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XPath expression for potential syntactic or semantic problems

BEA-382512

Error: OSB Insert action failed updating variable "variable": msg

Description

There was an error during the execution of Insert action. This could happen if an XQuery expression the result of which is being inserted into a variable, results in a runtime error from the XQuery evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XQuery expression for potential syntactic or semantic problems

BEA-382513

Error: OSB Replace action failed updating variable "variable": msg

Description

There was an error during the execution of Replace action. This could happen if an XQuery expression the result of which is being replaced in a variable, results in a runtime error from the XQuery evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XQuery expression for potential syntactic or semantic problems

BEA-382514

Error: OSB Rename action failed updating variable "variable": msg

Description

There was an error during the execution of Rename action. This could happen if the specified XPath expression is not a valid expression or results in a runtime error from XPath evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XPath expression for potential syntax or semantic problems

BEA-382515

Error: Callout to java method "method" resulted in exception: msg

Description

Java method specified in Java Callout action was invoked and resulted in an exception. The exception details should be part of the error message.

BEA-382516

Error: Failed to evaluate expression for callout to java method "method". Argument index: argIndex, exception: errormsg

Description

There was an error evaluating one or more arguments to a Java callout method. This could happen if an XQuery expression the result of which is being used as an argument to java method, results in a runtime error from the XQuery evaluation engine. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured XQuery expression for potential syntactic or semantic problems

BEA-382517

Error: Failed to assign the result of java callout to variable. Method: method, variable: varname, exception: errormsg

Description

There was an error while assigning the result of invoked Java method to specified message context variable. This could happen if the variable being assigned to is a read-only system variable (e.g. $operation), or a system variable whose type does not match that returned by the invoked Java method. There should be a specific error message that will pinpoint the source of the problem.

BEA-382518

Error: Security exception while calling to java method "method". Service account: sacct. t

Description

There was an error while setting up the security context for java callout method. This could happen if there is a problem retrieving the credentials of specified service account. There should be a specific error message that will pinpoint the source of the problem.

BEA-382519

Error: The XmlObject returned by a java callout must be a simple type, an attribute or an element.

Description

Java method invoked returned an unsupported type of XML Bean. The only supported types are simple types, attributes or element.

BEA-382520

Error: Unexpected error executing if-then-else expression

Description

An unexpected runtime exception has occured during the execution of the if-then-else action.

Action

Contact technical support

BEA-382521

Error: Variable targeted for rename is not XML or MFL

Description

The variable that is targeted for rename operation does not hold XML data.

Action

Check the value of the variable that is targeted for rename operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382522

Error: Variable targeted for replace is not XML or MFL

Description

The variable that is targeted for replace operation does not hold XML data.

Action

Check the value of the variable that is targeted for rename operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382523

Error: The outbound variable has not been initialized

Description

This is an unexpected error that occured due to incorrect state of the pipeline at runtime

Action

Contact technical support

BEA-382524

Error: Failed to perform validation

Description

An unexpected runtime error has occured during the execution of validate action. There should be a specific error message that will pinpoint the source of the problem.

Action

Contact technical support

BEA-382525

Error: Variable targeted for validate is not XML or MFL

Description

The variable that is targeted for validate operation does not hold XML data.

Action

Check the value of the variable that is targeted for validate operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382526

Error: Variable targeted for insert is not XML or MFL

Description

The variable that is targeted for insert operation does not hold XML data.

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382527

Error: Inserting the result of this expression will create an invalid (multi-rooted) document

Description

Inserting the result of this expression will create an invalid (multi-rooted) document. One way this could happen is if ones tries to insert (some) element node before . in $body message context variable

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382528

Error: Failed to insert after

Description

Inserting the result of this expression after specified XPath resulted in an error.

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382529

Error: Cannot insert as a child of an attribute

Description

It is illegal to insert as a child of an attribute

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382530

Error: Unable to insert after first child

Description

Unable to insert after first child as there was no child elements of specified XPath expression

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382531

Error: Unable to insert after last child

Description

Unable to insert after child element

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382532

Error: Only attributes may be inserted next to another attribute

Description

Only attributes may be inserted next to another attribute

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382533

Error: Only elements and simple values may be inserted next to or inside of another element

Description

Only elements and simple values may be inserted next to or inside of another element

Action

Check the value of the variable that is targeted for insert operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382534

Error: Content targeted for replace is not an element or an attribute

Description

Content targeted for replace is not an element or an attribute

Action

Check the value of the variable that is targeted for replace operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382535

Error: An attribute may only be replaced with an attribute

Description

An attribute may only be replaced with an attribute

Action

Check the value of the variable that is targeted for replace operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382536

Error: An element or its contents may only be replaced with elements and simple values

Description

An element or its contents may only be replaced with elements and simple values

Action

Check the value of the variable that is targeted for replace operation. You can use Log action to see the value of any message context variable at runtime.

BEA-382537

Error: Invalid SOAP RPC document - part "name" is not defined in the WSDL definitions.

Description

The response to service callout contained invalid data according to WSDL defintion of the service being invoked.

Action

Check the response payload of service invocation and make sure it conforms to the WSDL definitions for the service. The contents of the received response can be seen in the details element of $fault message context variable.

BEA-382538

Error: Invalid SOAP RPC document - part name occurs more than once.

Description

The response to service callout contained invalid data according to WSDL defintion of the service being invoked.

Action

Check the response payload of service invocation and make sure it conforms to the WSDL definitions for the service. The contents of the received response can be seen in the details element of $fault message context variable.

BEA-382539

Error: Invalid SOAP RPC document - part name contains more than one XML element

Description

The response to service callout contained invalid data according to WSDL defintion of the service being invoked.

Action

Check the response payload of service invocation and make sure it conforms to the WSDL definitions for the service. The contents of the received response can be seen in the details element of $fault message context variable.

BEA-382540

Error: Unexpected error - invalid internal state occured during the execution of service callout action

Description

An unexpected error had occured during the execution of service callout action

Action

Contact technical support

BEA-382541

Error: Invalid SOAP RPC document - part "name" is required but not present.

Description

The response to service callout contained invalid data according to WSDL defintion of the service being invoked.

Action

Check the response payload of service invocation and make sure it conforms to the WSDL definitions for the service. The contents of the received response can be seen in the details element of $fault message context variable.

BEA-382542

Error: The Transport Mode is set to "request-only". A Service Callout only supports "request-response" communications.

Description

The Transport Mode is set to "request-only". Service Callout action only supports "request-response" communications.

Action

Check the contents of $outbound message context variable to make sure the tranport mode element is set properly. One can use Log action to see the contents of any message context variable at runtime

BEA-382543

Error: Invalid message: the SOAP Header value is not an XML instance

Description

The value of the message context variable used to set SOAP headers for service callout action does not contain valid XML

Action

Check the contents of specified message context variable to make sure it is set properly. One can use Log action to see the contents of any message context variable at runtime

BEA-382544

Error: Invalid message: the message is not an XML instance

Description

The value of the message context variable used to set SOAP body for service callout action does not contain valid XML

Action

Check the contents of specified message context variable to make sure it is set properly. One can use Log action to see the contents of any message context variable at runtime

BEA-382545

Error: Unexpected error - the part schema type cannot be found

Description

An unexpected error had occured during the execution of service callout action during the parsing phase of the service callout response

Action

Contact technical support

BEA-382546

Error: Unexpected error - mismatch between configuration and WSDL definition

Description

An unexpected error had occured during the execution of service callout action during the parsing phase of the service callout response

Action

Contact technical support

BEA-382547

Error: The value for part "name" is not valid. An XML Element is expected.

Description

An error had occured during the execution of service callout action during the phase when an outbound request payload gets constructed due to the fact that the configured message context variable does not contain valid XML element.

Action

Check the contents of specified message context variable to make sure it is set properly. One can use Log action to see the contents of any message context variable at runtime

BEA-382548

Error: Unable to find the type definition of the part name

Description

An error had occured during the execution of service callout action during the phase when an outbound request payload gets constructed due to missing or invalid type information in WSDL definitions

Action

Check the registered WSDL definition for proper semantic type infomation for the part in question

BEA-382549

Error: Error accessing information from the target WSDL service

Description

An error had occured during the execution of service callout action during the phase when an outbound request payload gets constructed due to not being able to access service WSDL definition. There should be a specific message that will point to the cause of the error.

Action

Check that the corresponding WSDL definition is properly registered

BEA-382550

Error: Setting quality of service to Exactly Once in service callout action is not supported for service name

Description

Setting quality of service to Exactly Once in service callout action is not supported for selected service. Quality of service can be set to Exactly Once only if the service transport endpoint is Transactional and the message pattern is one-way or synchronous.

Action

Check the pipeline configuration to make sure that the quality of service is not set to Exactly Once via Routing Options or some other action that changes the contents of $outbound message context variable. You can use Log action to see the value of any message context variable at runtime.

BEA-382551

Error: XQuery expression did not return the non-empty source to apply the mfl transformation.

Description

XQuery expression did not return the non-empty source to apply the mfl transformation.

Action

Check the XQuery expression to make sure that it returns a non-empty input to apply the mfl transformation. You can use Log action to see the value of XQuery expression at runtime.

BEA-382552

Error: Binary content reference ref is not valid.

Description

Binary content reference is not valid. It should be inserted by the pipeline as a result of passing binary content to the pipeline.

Action

Check the binary-content ref attribute on which the mfl transformation is applied. binary-content element should be inserted as a result of passing binary content to the pipeline. You can use Log action to see the value of this ref attribute at runtime.

BEA-382553

Error: Input to non-xml to xml mfl transformation is invalid.

Description

Input to the transformation should be non-empty text or the binary data represented by binary-content element in the pipeline. XML input is not allowed.

Action

Make sure that input expression returns the text or the binary-content ref attribute inserted by the pipeline as a result of passing binary content to the OSB. You can use Log action to see the value of this expression at runtime.

BEA-382554

Error: XQuery expression evaluates to an invalid MFL resource name name.

Description

XQuery expression did not return the valid MFL resource name. It should evaluate to an existing mfl resource in the OSB at runtime.

Action

Make sure that XQuery expression should evaluate to a existing mfl resource in the OSB at runtime. You can use Log action to see the value of this expression at runtime.

BEA-382555

Error: XML to Binary mfl transformation failed for the MFL Resource name : errorMsg

Description

XML to Binary mfl transformation failed. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured mfl resource and the input data for potential syntactic or semantic problems.

BEA-382556

Error: Binary to XML mfl transformation failed for the MFL Resource name : errorMsg

Description

Binary to XML mfl transformation failed. There should be a specific error message that will pinpoint the source of the problem.

Action

Check the configured mfl resource and the input data for potential syntactic or semantic problems.

BEA-382557

Error: No source was found in source repository with ref 'ref'.

Description

No source was found in source repository with ref 'ref', which was the result of configured XQuery expression

Action

Check the XQuery expression to make sure that it returns proper result. You can use Log action to see the value of an XQuery expression at runtime.

 

Back to Index Page

Copyright © 2008, 2013, Oracle. All rights reserved.