Skip Headers
Oracle® Fusion Middleware Administrator's Guide
11g Release 1 (11.1.1)

Part Number E10105-14
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

20 Using the Movement Scripts

Oracle Fusion Middleware provides a series of scripts that you can use to move your environment, for example replicating (cloning) a test environment to a production environment. The scripts enable you to copy a Middleware home and the Oracle homes and Oracle WebLogic Server domains, as well as the configuration of certain Oracle Fusion Middleware components, such as Oracle SOA Suite, Oracle HTTP Server, Oracle Internet Directory, and Oracle Virtual Directory. This chapter explains the scripts you can use to move these entities.

This chapter includes the following topics:

Note:

Not all components support the movement scripts. For detailed procedures for moving Oracle Fusion Middleware from one environment to another, see Chapter 21. That chapter describes using these scripts, and other steps for moving from a source environment to a target environment.

20.1 Introduction to the Movement Scripts

The movement scripts minimize the amount of work that would otherwise be required to reapply all the customization and configuration changes made in one environment to another. You can use these scripts to:

You can move the following, to the same host or a different host. The source and target environments must share the same operating system and the same platform architecture (in terms of number of bits).

Note:

The movement scripts support moving most of the Oracle Fusion Middleware components, but for some components, you must take manual steps in addition to, or instead of, using the scripts. See Chapter 21 for the procedures for moving Oracle Fusion Middleware components from a source to a target environment, including when to use the scripts.

Table 20-1 shows which Oracle Fusion Middleware components support the movement scripts and provides pointers to the procedures for moving each component.

Table 20-1 Support for Movement Scripts

Component Supported? Procedure Documented

Oracle Access Manager

Yes

Section 21.4.1.1

Oracle Adaptive Access Manager

Yes

Section 21.4.1.1

Oracle B2B

Yes

Section 21.4.2.1

Oracle Business Activity Monitoring

Yes

Section 21.4.2.1, Task 6

Oracle Business Intelligence

Yes

Section 21.4.7.1

Oracle Business Intelligence Discoverer

No

Section 21.4.9.1

Oracle Business Process Management

Yes

Section 21.4.2.1

Oracle Data Integrator

Yes

Section 21.4.10.1

Oracle Directory Integration Platform

Yes

Section 21.4.1.1

Oracle Enterprise Performance Management Workspace

No

Section 21.4.5

Oracle Essbase

Yes

Section 21.4.5

Oracle Forms Services

No

Section 21.4.9.1

Oracle HTTP Server

Yes

Section 21.4.6.1.1

Oracle Human Workflow

Yes

Section 21.4.2.1

Oracle Hyperion Calculation Manager

No

Section 21.4.5

Oracle Hyperion Financial Reporting

No

Section 21.4.5

Oracle Hyperion Provider Service

No

Section 21.4.5

Oracle Hyperion Smart View for Office

No

Section 21.4.5

Oracle Identity Federation

Yes

Section 21.4.1.1

Oracle Identity Manager

No

No procedure is supported. In addition, if Oracle Identity Manager is part of the source environment of other components, the movement scripts will fail.

Oracle Identity Navigator

Yes

Section 21.4.1.1

Oracle Information Rights Management

No

Section 21.4.3.1, Task 3

Oracle Internet Directory

Yes

Section 21.4.1.1

Oracle Platform Security Services

Yes

Section 21.4.1.1

Oracle Portal

No

Section 21.4.9.1

Oracle Real-Time Decisions

Yes

Section 21.4.8.1

Oracle Reports

No

Section 21.4.9.1

Oracle Security Token Service

Yes

Section 21.4.1.1

Oracle Service Bus

Yes

Section 21.4.2.1.

Oracle SOA Suite

Yes

Section 21.4.2.1

Oracle User Messaging Service

Yes

Section 21.4.2.1, Task 8

Oracle Virtual Directory

Yes

Section 21.4.1.1

Oracle Web Cache

No

Section 21.4.6.1.2

Oracle Web Services Manager

Yes

Section 21.4.1.1

Oracle WebCenter Content

Yes

Section 21.4.4.1

Oracle WebCenter Content: Imaging

Yes

Section 21.4.3.1

Oracle WebCenter Content: Inbound Refinery

Yes

Section 21.4.3.1

Oracle WebCenter Content: Records

Yes

Section 21.4.3.1

Oracle WebCenter Portal

Yes

Section 21.4.3.1


20.2 Movement Scripts

Oracle Fusion Middleware uses the following jar file to execute the scripts necessary to move the binary and configuration files:

(UNIX) ORACLE_COMMON_HOME/jlib/cloningclient.jar
(Windows) ORACLE_COMMON_HOME\jlib\cloningclient.jar

Table 20-2 shows the scripts you use to move a Middleware home or component.

Table 20-2 Movement Scripts

TO: Script See:

Copy the binary files of the source Middleware home

(UNIX) ORACLE_COMMON_HOME/bin/copyBinary.sh
(Windows) ORACLE_COMMON_HOME\bin\copyBinary.cmd

Section 20.2.1.1

Apply the copied Middleware home to the target

(UNIX) ORACLE_COMMON_HOME/bin/pasteBinary.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteBinary.cmd

Section 20.2.1.2

Copy the domain and Java component configuration

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

Section 20.2.1.3

Copy the Oracle instance configuration

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

Section 20.2.1.4

Copy the system component configuration

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

Section 20.2.1.5

Copy the Node Manager configuration

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

Section 20.2.1.6

Extract a move plan from the domain or component

(UNIX) ORACLE_COMMON_HOME/bin/extractMovePlan.sh
(Windows) ORACLE_COMMON_HOME\bin\extractMovePlan.cmd

Section 20.2.1.7

Apply the copied configuration for the domain and Java components to the target

(UNIX) ORACLE_COMMON_HOME/bin/pasteConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteConfig.cmd

Section 20.2.1.8

Apply the copied configuration for the Oracle instance to the target

(UNIX) ORACLE_COMMON_HOME/bin/pasteConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteConfig.cmd

Section 20.2.1.9

Apply the copied configuration for a system component to the target

(UNIX) ORACLE_COMMON_HOME/bin/pasteConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteConfig.cmd

Section 20.2.1.10

Apply the copied configuration for the Node Manager to the target

(UNIX) ORACLE_COMMON_HOME/bin/pasteConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteConfig.cmd

Section 20.2.1.11

Generate a file containing an obfuscated password

(UNIX) ORACLE_COMMON_HOME/bin/obfuscatePassword.sh
(Windows) ORACLE_COMMON_HOME\bin\obfuscatePassword.cmd

Section 20.2.1.12


To view the help on any of these scripts, use the -help option. For example:

./pasteConfig.sh -javaHome /scratch/Oracle/Middleware/jdk160_21 -help

Note that the help shows the UNIX version of the parameter values. For other platforms, such as Windows, change the parameter values for the platform.

To specify additional Java options, define the T2P_JAVA_OPTIONS environment variable and specify the options in the variable definition. The following examples set the value for the Java temp directory:

Note:

A Universal Uniform Naming Convention (UNC) path is not supported on Windows. For example, the following is not supported:

\\host_name\oracle\java\win64\jdk6\jre\bin\java

Note:

If you are applying the archive of a Middleware home on a host that does not yet have Oracle Fusion Middleware installed, note the following:

  • The host must have JDK 1.6.04 or higher installed. In addition, ensure that the PATH, CLASSPATH, and JAVA_HOME environment variables point to the JDK.

  • Copy the pasteBinary script from the following location in the source host to the target host:

    (UNIX) ORACLE_COMMON_HOME/bin/pasteBinary.sh
    (Windows) ORACLE_COMMON_HOME\bin\pasteBinary.cmd
    
  • Copy the following file from the following location in the source host to the target host:

    (UNIX) ORACLE_COMMON_HOME/jlib/cloningclient.jar
    (Windows) ORACLE_COMMON_HOME\jlib\cloningclient.jar
    
  • If you run the pasteBinary script from a different location than ORACLE_COMMON_HOME/bin, then the pasteBinary script and the cloningclient.jar file must be in the same directory.

    If you are running pasteBinary on a host that has no prior Oracle Fusion Middleware installations, ORACLE_COMMON_home/bin will not exist prior to running pasteBinary, and therefore the pasteBinary script and cloningclient.jar must be in the same directory.

  • Ensure that the files have execute permission.

20.2.1 Movement Scripts Syntax

The following topics describe the syntax of the movement scripts. The options are described in the tables that follow the syntax.

Note:

  • All movement scripts ask if you want to continue whenever you do not specify the -silent true option. To continue, you must type yes, which is not case sensitive. Any words other than yes causes the script to return an error. Also note that, in silent mode, the scripts generate an error if you do not provide passwords where they are needed.

  • Most options have shortcut names, as described in the tables later in this chapter.

  • The value of options must not contain a space. For example, on Windows, you cannot pass the following as a value to the -javaHome option:

    C:\Program Files\jdk
    
  • If any argument passed to a movement script contains an equals sign (=), the value must be enclosed in double quotation marks ("). For example:

    -additionalParams "search.encrypt.key=C:\T2P\encrypt.txt" 
    
  • The value of the javaHome option must use the Java home that is defined in the following file (note the period (.) before the filename):

    MW_HOME/wlserver_n/.product.properties
    

20.2.1.1 copyBinary Script

Creates an archive file of the source Middleware home, by copying the binary files of that Middleware home, including all of its Oracle homes and its WebLogic Server home, into the archive file.

The copyBinary script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/copyBinary.sh
(Windows) ORACLE_COMMON_HOME\bin\copyBinary.cmd

The syntax is:

copyBinary -javaHome path_of_jdk
           -archiveLoc archive_location 
           -sourceMWHomeLoc MW_HOME   
            [-invPtrLoc Oracle_InventoryLocation]
            [-logDirLoc log_dir_path]
            [-silent {true | false}]
            [-ignoreDiskWarning {true | false}]

The following example shows how to create an archive of a Middleware home on Linux:

copyBinary.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18 
              -archiveLoc /tmp/mw_copy.jar
              -sourceMWHomeLoc /scratch/Oracle/Middleware1 
              -invPtrLoc /scratch/oracle/oraInst.loc

Note:

Before you execute the copyBinary script, ensure that all Oracle homes in the Middleware home are either all 32 bit or all 64 bit. The operation does not support a mix of 32-bit and 64-bit Oracle homes.

When you execute the script, you must specify a matching Java home. That is, if the Oracle homes are 64 bit, you must specify a 64-bit Java home. If the Oracle homes are 32 bit, you must specify a 32-bit Java home.

Table 20-3 describes the options for the copyBinary script.

Table 20-3 Options for the copyBinary Script

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file to be created with the copyBinary script.

The archive location must not exist. If the parent directory does not exist, the script will create it. The parent directory must have write permission.

Ensure that the archive location is not within the Middleware home structure.

Mandatory

-sourceMWHomeLoc

-smw

The absolute path of the Middleware home to be archived. You can only specify one Middleware home.

Mandatory

-invPtrLoc

-ipl

On UNIX and Linux, the absolute path to the Oracle Inventory pointer. Use this option if the inventory location is not in the default location, so that the operation can read the Oracle homes specified in the inventory.

The file, oraInst.loc, must exist. If it does not exist, create it as a root user or user with normal privileges. The following shows an example of the contents of the file:

inventory_loc=/scratch/oraInventory

You must have write permission to the inventory location.

On UNIX and Linux, the default location is /etc/oraInst.loc.

On Windows, if you specify this parameter, the script ignores it.

In previous releases, the shortcut was -invLoc, but that shortcut is now deprecated.

Optional, if the inventory is in the default location. Otherwise, it is mandatory on Linux.

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional

-ignoreDiskWarning

-idw

Specifies whether the operation ignores a warning that there is not enough free space available. The default is false.

You may need to use this flag if the target is NFS mounted or is on a different file system, such as Data ONTAP.

Optional


20.2.1.2 pasteBinary Script

Applies the archive to the target destination, by pasting the binary files of the source Middleware home to the target environment. You can apply the archive to the same host or a different host.

The pasteBinary script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/pasteBinary.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteBinary.cmd

The syntax is:

pasteBinary -javaHome path_of_jdk
            -archiveLoc archive_location
            -targetMWHomeLoc target_MW_Home_location
            [-executeSysPrereqs {true | false}]
            [-invPtrLoc Oracle_InventoryLocation]
            [-logDirLoc log_dir_path]
            [-silent {true | false}]
            [-ignoreDiskWarning {true | false}]

The following example shows how to apply the archive to the directory /scratch/oracle/MW_Home_prod, on Linux:

pasteBinary.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18
               -archiveLoc  /tmp/mw_copy.jar 
               -targetMWHomeLoc /scratch/oracle/MW_Home_prod 

Table 20-4 describes the options for the pasteBinary script.

Table 20-4 Options for the pasteBinary Script

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

If the source Middleware home was installed with the JDK and Oracle JRockit outside of the Middleware home, the path you specify is used to configure the Middleware home.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file created with the copyBinary script.

The location must exist.

In previous releases, this option was named archiveLocation, but that name is now deprecated.

Mandatory

-targetMWHomeLoc

-tmw

The absolute path of the target Middleware home.

Ensure that the Middleware home directory does not exist at that location. If it does exist, the script returns an error message.

The targetMWHomeLoc cannot be inside another Middleware home.

In previous releases, this option was named targetLocation and the shortcut was -tl, but those are now deprecated.

Mandatory

-executeSysPrereqs

-esp

Specifies whether the pasteBinary operation checks the prerequisites of the Oracle homes. The default is that it checks the prerequisites. To specify that it does not check the prerequisites, specify this option with the value false.

In previous releases, the shortcut was -exsysprereqs, but that shortcut is now deprecated.

Optional

-invPtrLoc

-ipl

On UNIX and Linux, the absolute path to the Oracle Inventory pointer. Use this option if the inventory location is not in the default location (/etc/oraInst.loc), so that the operation can register the Oracle homes with the central Oracle inventory specified in the Oracle Inventory pointer file.

If the oraInst.loc is not present at default location, you must create this file either at default location as a root user or at any other location as a root or normal user. The following shows an example of the contents of the file:

inventory_loc=/scratch/oraInventory

If the directory specified as the inventory_loc does not exist, the operation will create it.

You must have write permission to the inventory location.

On UNIX and Linux, the default location is /etc/oraInst.loc.

On Windows, if you specify this parameter, the script ignores it.

In previous releases, the shortcut was -invLoc, but that shortcut is now deprecated.

Optional, if the inventory is in the default location. Otherwise, it is mandatory on Linux.

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional

-ignoreDiskWarning

-idw

Specifies whether the operation ignores a warning that there is not enough free space available. The default is false.

You may need to use this flag if the target is NFS mounted or is on a different file system, such as Data ONTAP.

Optional


20.2.1.3 copyConfig Script for Java Components

Creates a configuration archive that contains the snapshot of the configuration of an Oracle WebLogic Server domain. The underlying components of an Oracle WebLogic Server domain retain their configuration information in different data stores, such as a file system, Oracle Metadata Services (MDS), LDAP, or a database.

You must run the copyConfig script for each Oracle WebLogic Server domain in the source environment. A configuration archive is created for each source domain.

The Administration Server and all Managed Servers in the domain must be started when you run the script.

The copyConfig script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

The syntax is:

copyConfig  -javaHome path_of_jdk
            -archiveLoc archive_location 
            -sourceDomainLoc domain_location
            -sourceMWHomeLoc Middleware_home_location
            -domainHostName domain_host_name
            -domainPortNum  domain_port_number 
            -domainAdminUserName domain_admin_username
            -domainAdminPasswordFile domain_admin_password_file
            [-mdsDataExport {true | false}]
            [-opssDataExport {true | false}] 
            [-additionalParams property1=value1[, property2=value2]
            [-logDirLoc log_dir_path]
            [-silent {true | false}]

The following example copies the configuration of a domain containing Java components:

copyConfig.sh -javaHome /scratch/jrockit_160_20_D1.1.0-18 
               -archiveLoc /tmp/a.jar
               -sourceDomainLoc /scratch/oracle/config/domains/WLS_SOAWC 
               -sourceMWHomeLoc /scratch/work/mw_home1/
               -domainHostName myhost.example.com 
               -domainPortNum 7001
               -domainAdminUserName weblogic 
               -domainAdminPasswordFile /home/oracle/password 
               -silent true

Table 20-5 describes the options for the copyConfig script for Java components.

Table 20-5 Options for the copyConfig Script for Java Components

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file to be created by the copyConfig script.

Mandatory

-sourceDomainLoc

-sdl

The absolute path of the source domain containing the Java component.

Note that on Windows, you should not include a backslash at the end of the path.

Mandatory

-sourceMWHomeLoc

-smw

The absolute path of the source Middleware home.

Mandatory

-domainHostName

-dhn

The name of the host on which the domain is configured.

Mandatory

-domainPortNum

-dpn

The port number of the Administration Server for the domain.

In previous releases, this option was named domainPortNo, and the shortcut was -domainport, but those are now deprecated.

Mandatory

-domainAdminUserName

-dau

The name of the administrative user for the domain.

In previous releases, the shortcut was -domainuser, but that shortcut is now deprecated.

Mandatory

-domainAdminPasswordFile

-dap

The absolute path of a secure file containing the password for the administrative user for the domain on the source environment. You must provide a password file, even if you are not changing the configuration.

In previous releases, the shortcut was -domainpass, but that shortcut is now deprecated.

Mandatory

-mdsDataExport

-mdi

Specifies whether to export the application MDS metadata to the archive so that it can be imported into the target. The default is true.

Specify false if you do not want to export the application MDS metadata.

If this option is set to true, the subsequent pasteConfig script that copies the component to the target imports the application MDS metadata to the target.

Optional

-opssDataExport

-opss

Specifies whether to export the Oracle Platform Security Services data. The default is true.

If this option is set to true, the subsequent pasteConfig script that copies the component to the target imports the Oracle Platform Security Services data to the target.

Note: If this option is set to true, you must set the following environment variable before you run the pasteConfig script:

CONFIG_JVM_ARGS "-Xmx2048M -Xms2048M"

Optional

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-additionalParams

-ap

An additional parameter and its value to be passed to the script.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional


20.2.1.4 copyConfig Script for Oracle Instances

Creates a configuration archive that contains the snapshot of the configuration of an Oracle instance. The copyConfig script moves the Oracle instance and the configuration of all the system components in the Oracle instance.

You must run the copyConfig script for each Oracle instance in the source environment. A configuration archive is created for each Oracle instance.

The Administration Server and all Managed Servers in the domain must be started when you run the script.

The copyConfig script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

The syntax is:

copyConfig  -javaHome path_of_jdk
            -archiveLoc archive_location 
            -sourceInstanceHomeLoc src_instance_path
            [-additionalParams property1=value1[, property2=value2]
            [-logDirLoc log_dir_path]
            [-silent {true | false}]

The following example shows how to create an archive of the Oracle instance located in /scratch/Oracle/Middleware/im_1 on Linux:

copyConfig.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18
               -archiveLoc /tmp/ovd1.jar
               -sourceInstanceHomeLoc /scratch/Oracle/Middleware1/im_1

Table 20-6 describes the options for the copyConfig script for Oracle instances. It also describes the options for the copyConfig Script for individual system components. the only difference is that you use the -sourceComponentName option to move individual system components.

Table 20-6 Options for the copyConfig Script for Oracle Instances and System Components

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file to be created by the copyConfig script.

In previous releases, this option was named archiveLocation, but that name is now deprecated.

Mandatory

-sourceInstanceHomeLoc

-sih

The absolute path of the Oracle instance for the source component.

Mandatory

-additionalParams

-ap

An additional parameter and its value to be passed to the script.

Optional

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional

-sourceComponentName

-scn

The name of the component to be copied. For example, if your Oracle Internet Directory component is named oid1, specify oid1.

Optional. Use if you want to move only one system component, as described in Section 20.2.1.5.


20.2.1.5 copyConfig Script for System Components

Creates a configuration archive that contains the snapshot of the configuration of an Oracle instance and the specified individual system component, which retains its configuration information in different data stores, such as a file system, Oracle Metadata Services (MDS), LDAP, or a database.

Use this script instead of copyConfig for Oracle instances, if you want to move only one system component, along with the Oracle instance to the target environment.

The copyConfig script supports moving the following system components:

  • Oracle HTTP Server

  • Oracle Internet Directory

  • Oracle Virtual Directory

  • Oracle BI EE

The Administration Server and all Managed Servers in the domain must be started when you run the script.

The copyConfig script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

The syntax is:

copyConfig  -javaHome path_of_jdk
            -archiveLoc archive_location 
            -sourceInstanceHomeLoc src_instance_path
            -sourceComponentName src_component_name
            [-logDirLoc log_dir_path]
            [-silent {true | false}]

The following example shows how to create an archive of the Oracle Virtual Directory instance named ovd1 in the Oracle instance located in /scratch/Oracle/Middleware/im_1 on Linux:

copyConfig.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18
               -archiveLoc /tmp/ovd1.jar
               -sourceInstanceHomeLoc /scratch/Oracle/Middleware1/im_1
               -sourceComponentName ovd1

See Table 20-6 for description of the options for the copyConfig script for system components.

20.2.1.6 copyConfig Script for Node Manager

Creates a configuration archive that contains the snapshot of the configuration of Node Manager.

You must run the copyConfig script for each Node Manager in the source environment. A configuration archive is created for each source Node Manager.

The copyConfig script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/copyConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\copyConfig.cmd

The syntax is:

copyConfig  -javaHome path_of_jdk
            -archiveLoc archive_location
            -sourceNMHomeLoc source_Node_Manager_Home_location
            [-logDirLoc log_dir_path]
            [-silent {true | false}]

The following example shows how to create a copy of the source Node Manager configuration located in /scratch/Oracle/Middleware/wlserver_10.3/common/nodemanager:

copyConfig.sh -javaHome USER_HOME/jrockit_160_17_R28.0.0-679/
              -archiveLoc /tmp/nm.jar
              -sourceNMHomeLoc /scratch/Oracle/Middleware/wlserver_10.3/common/nodemanager
              -silent true

Table 20-7 describes the options for the copyConfig script for Node Manager.

Table 20-7 Options for the copyConfig Script for Node Manager

Options Shortcut Description Mandatory or Optional

-javaHome

None

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file to be created by the copyConfig script.

Mandatory

-sourceNMHomeLoc

-snh

The absolute path of the source Node Manager home.

Mandatory

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

None

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional


20.2.1.7 extractMovePlan Script

Extracts configuration information from the archive into a move plan. It also extracts any needed configuration plans. Then, you edit the move plan, specifying properties for the target environment.

The extractMovePlan script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/extractMovePlan.sh
(Windows) ORACLE_COMMON_HOME\bin\extractMovePlan.cmd

The syntax is:

extractMovePlan -javaHome path_of_jdk
                -archiveLoc archive_location
                -planDirLoc move_plan_directory
                [-optimizationHints fusionApps,sameSchemaNameSinglePassword, rpdDataSource}
                [-logDirLoc log_dir_path]

The following example extracts the plans from the archive j2ee.jar:

extractMovePlan.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18
                   -archiveLoc /tmp/j2ee.jar
                   -planDirLoc /scratch/Oracle/t2p_plans

The extractMovePlan script extracts the move plan to the specified directory. Depending on the type of component that you are moving, the extractMovePlan script may also extract other configuration plans.

  • For Java components, such as Oracle SOA Suite, it may extract the following:

    /scratch/Oracle/t2p_plans/moveplan.xml
    /scratch/Oracle/t2p_plans/composites/configplan1.xml
    /scratch/Oracle/t2p_plans/composites/configplan2.xml
    /scratch/Oracle/t2p_plans/adapters/deploymentplan1.xml
    /scratch/Oracle/t2p_plans/adapters/deploymentplan2.xml
    
  • For system components, such as Oracle Internet Directory and Oracle Virtual Directory, it may extract the following:

    /scratch/Oracle/t2p_plans/moveplan.xml
    

Table 20-8 describes the options for the extractMovePlan script:

Table 20-8 Options for the extractMovePlan Script

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file created by the copyConfig script.

Mandatory

-planDirLoc

-pdl

The absolute path to a directory to which the move plan, along with any needed configuration plans, is to be extracted.

The directory must not exist.

Mandatory

-optimizationHints

opth

Specifies the configuration values to auto-populate based on the topology on the target environment. These values are omitted from the move plan. Use of the hints is recommended if they apply to your environment.

This option takes the following arguments:

  • fusionapps (fa). If you use the -optimzationHints option, you must provide this hint.

  • sameSchemaNameSinglePassword (ssnsp). The same password is used for all schemas associated with a particular database.

  • rpdDataSource (rpdds). The same password is used for all schemas associated with a particular database specified in RPD_CONFIG section of the move plan.

    If the sameSchemaNameSinglePassword flag is provided, then automatically this flag is set to true.

Optional

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional


For information about the properties in the move plans, and which properties you should edit, see Section 20.3.

20.2.1.8 pasteConfig Script for Java Components

Applies the copied configurations from the source environment to the target environment. Inputs for the script include the location of the configuration archive created with the copyConfig script for the Java components and the location of the modified move plan. The pasteConfig script re-creates the configuration information for the Oracle WebLogic Server domain in the target environment. It also merges the move plan property values for the target environment.

The pasteConfig script is located in:

(UNIX) ORACLE_COMMON_HOME/bin/pasteConfig.sh
(Windows) ORACLE_COMMON_HOME\bin\pasteConfig.cmd

The syntax is:

pasteConfig  -javaHome path_of_jdk 
             -archiveLoc archive_location
             -targetDomainLoc trgt_domain_path 
             -targetMWHomeLoc trgt_Middleware_Home_path
             -movePlanLoc move_plan_path 
             -domainAdminPasswordFile domain_admin_password_file 
             [-appDir WLS_application_directory] 
             [-logDirLoc log_dir_path]
             [-silent {true | false}]

The following example shows how to apply the archive of the domain to the Middleware home MW_home1:

pasteConfig.sh -javaHome /scratch/Oracle/Middleware1/jrockit_160_20_D1.1.0-18
            -archiveLoc /tmp/java_ee_cl.jar
            -targetDomainLoc /scratch/oracle/config/domains/dom_cl
            -targetMWHomeLoc /scratch/oracle/MW_home1 
            -movePlanLoc /scratch/oracle/java_ee/move_plan.xml
            -domainAdminPasswordFile /scratch/pwd_dir/pass 
            -logDirLoc /tmp/log

Table 20-9 describes the options for the pasteConfig script for Java components.

Table 20-9 Options for the pasteConfig Script for Java Components

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file created by the copyConfig script.

Mandatory

-targetDomainLoc

-tdl

The absolute path of the target domain. The domain location must not exist.

The domain directory may be located outside of the directory structure of the Middleware home.

Mandatory

-targetMWHomeLoc

-tmw

The absolute path of the target Middleware home.

Mandatory

-movePlanLoc

-mpl

The absolute path of the move plan extracted from the source.

Mandatory

-domainAdminPasswordFile

-dap

The absolute path of a secure file containing the password for the administrative user for the domain on target environment. You must provide a password file, even if you are not changing the configuration.

Note that the password is based on the authentication provider for the domain. For example, the authenticator can be an embedded LDAP or an external LDAP.

In previous releases, the shortcut was -domainpass, but that shortcut is now deprecated.

Mandatory.

-appDir

-ad

The absolute path of the Oracle WebLogic Server application directory on the target.

Optional

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional


If any data source name contains a slash (/), pasteConfig will not migrate the data source.

20.2.1.9 pasteConfig Script for Oracle Instances

Applies the copied configurations from the source environment to the target environment. Inputs for the script include the location of the configuration archive created with the copyConfig script for the Oracle instance and the location of the modified move plan. The pasteConfig script iterates and re-creates the configuration information for the Oracle instance and all of its system components in the target environment. It also merges the move plan property values for the target environment.

The syntax is:

pasteConfig  -javaHome path_of_jdk 
             -archiveLoc archive_location
             -movePlanLoc move_plan_path 
             -targetInstanceHomeLoc trgt_Instance_path 
             [-targetInstanceName trgt_Instance_name] 
             [-targetOracleHomeLoc trgt_ORACLE_HOME_path] 
             [-logDirLoc log_dir_path]
             [-silent {true | false}]
             [ <Domain Detail> ]

<Domain Detail> =
         -domainHostName domain_host_name
         -domainPortNum  domain_port_number 
         -domainAdminUserName domain_admin_username
         -domainAdminPasswordFile domain_admin_password_file 

The following example shows how to apply the archive to the target and name the Oracle instance im_2:

pasteConfig.sh -javaHome /scratch/Oracle/Middleware/jrockit_160_20_D1.1.0-18
            -archiveLoc /tmp/ovd1.jar
            -movePlanLoc /scratch/oracle/ovd/move_plan.xml
            -targetOracleHomeLoc /scratch/Oracle/Middleware/Oracle_IM2 
            -targetInstanceHomeLoc /scratch/Oracle/Middleware/im_2 
            -targetInstanceName im_2 
            -domainHostName myhost 
            -domainPortNum 7001
            -domainAdminUserName domain_admin_username
            -domainAdminPasswordFile domain_admin_password_file 

Table 20-10 describes the options for the pasteConfig script for system components. It also describes the options for the pasteConfig Script for individual system components. The only difference is that you use the -sourceComponentName option to move individual system components.

Table 20-10 Options for the pasteConfig Script for Oracle Instances

Options Shortcut Description Mandatory or Optional

-javaHome

NA

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file created by the copyConfig script.

Mandatory

-movePlanLoc

-mpl

The absolute path of the move plan extracted from the source.

Mandatory

-targetInstanceHomeLoc

-tih

The absolute path of the target Oracle instance.

If the Oracle instance directory does not exist at that location, the script creates the directory.

Mandatory

-targetInstanceName

-tin

The name of the target Oracle instance, which is used to register the instance with the domain.

The name must be unique in the domain.

Optional, if the targetInstanceHomeLoc directory exists. In this case, the operation retrieves the name from the configuration.

-targetComponentName

-tcn

The name of the target component to be copied. The name must be unique in the instance.

Optional. Use if you want to move only one system component, as described in Section 20.2.1.5.

-targetOracleHomeLoc

-toh

The absolute path of the target Oracle home.

The target Oracle home must exist and it must contain the binaries for the component you are copying.

Optional, if the targetInstanceHomeLoc exists. In this case, the operation retrieves the value from the configuration.

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

NA

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional

Domain-Detail Options

     

-domainHostName

-dhn

The name of the host on which the domain is configured.

Use this option if you want to register the component with the domain.

In previous releases, the shortcut was -domainhost, but that shortcut is now deprecated.

Optional, if you do not want to register the component with the domain.

-domainPortNum

-dpn

The port number of the domain.

Use this option if you want to register the component with the domain.

The domain port number is listed in the following file as the adminPort:

ORACLE_INSTANCE/config/OPMN/opmn/instance.properties

For example: adminPort=7001

Optional, if you do not want to register the component with the domain.

-domainAdminUserName

-dau

The name of the administrative user for the domain.

Use this option if you want to register the component with the domain.

Optional, if you do not want to register the component with the domain.

-domainAdminPasswordFile

-dap

The absolute path of a secure file containing the password for the administrative user for the domain. You must provide a password file, even if you are not changing the configuration.

Use this option if you want to register the component with the domain.

Optional, if you do not want to register the component with the domain.


If any data source name contains a slash (/), pasteConfig will not migrate the data source.

20.2.1.10 pasteConfig Script for System Components

Applies the copied configurations for individual system components from the source environment to the target environment. Inputs for the script include the location of the configuration archive created with the copyConfig script for the Oracle instance and the location of the modified move plan. The pasteConfig script re-creates the configuration information for the Oracle instance and the specified system component in the target environment. It also merges the move plan property values for the target environment.

The pasteConfig script supports moving the following system components:

  • Oracle HTTP Server

  • Oracle Internet Directory

  • Oracle Virtual Directory

  • Oracle BI EE

The syntax is:

pasteConfig  -javaHome path_of_jdk 
             -archiveLoc archive_location
             -movePlanLoc move_plan_path 
             -targetComponentName trgt_component_name 
             -targetInstanceHomeLoc trgt_Instance_path 
             [-targetInstanceName trgt_Instance_name] 
             [-targetOracleHomeLoc trgt_ORACLE_HOME_path] 
             [-logDirLoc log_dir_path]
             [-silent {true | false}]
             [ <Domain Detail> ]

<Domain Detail> =
         -domainHostName domain_host_name
         -domainPortNum  domain_port_number 
         -domainAdminUserName domain_admin_username
         -domainAdminPasswordFile domain_admin_password_file 

The following example shows how to apply the archive to the Oracle instance im_2 and to name the target Oracle Virtual Directory instance ovd_cl:

pasteConfig.sh -javaHome /scratch/Oracle/Middleware/jrockit_160_20_D1.1.0-18
            -archiveLoc /tmp/ovd1.jar
            -movePlanLoc /scratch/oracle/ovd/move_plan.xml
            -targetOracleHomeLoc /scratch/Oracle/Middleware/Oracle_IM2 
            -targetInstanceHomeLoc /scratch/Oracle/Middleware/im_2 
            -targetInstanceName im_2 
            -targetComponentName ovd_cl 
            -domainHostName myhost 
            -domainPortNum 7001
            -domainAdminUserName domain_admin_username
            -domainAdminPasswordFile domain_admin_password_file 

See Table 20-10 for descriptions of the options for the pasteConfig script for system components.

20.2.1.11 pasteConfig Script for Node Manager

Applies the copied configurations of Node Manager from the source environment to the target environment. Inputs for the script include the location of the configuration archive created with the copyConfig script for the Oracle WebLogic Server Node Manger and the location of the modified move plan. The pasteConfig script re-creates the configuration information for Node Manager in the target environment. It also merges the move plan property values for the target environment.

Note:

All the domains that are to be managed by Node Manager should be moved before applying the copy of Node Manager to the target environment. In addition, the Administration Server must be running.

Even if the source Node Manager connection between the Administration Server and Node Manager is configured with SSL, they will both change to plain socket connection type after the copy of Node Manager is applied to the target environment.

You must run the pasteConfig script for each Node Manager in the source environment.

The syntax is:

pasteConfig  -javaHome path_of_jdk 
             -archiveLoc archive_location
             -targetNMHomeLoc trgt_Node_Manager_Home_path 
             -targetMWHomeLoc trgt_Middleware_Home_path 
             -movePlanLoc move_plan_path
             [-logDirLoc log_dir_path]
             [-silent {true | false}]

The following example shows how to apply the copy of Node Manager to the Node Manager home located in /scratch/Oracle/Middleware1/wlserver_10.3/common/nodemanager:

pasteConfig -javaHome USER_HOME/jrockit_160_17_R28.0.0-679/
            -archiveLoc /tmp/nm.jar
            -targetNMHomeLoc /scratch/Oracle/Middleware1/wlserver_10.3/common/nodemanager
            -targetMWHomeLoc /scratch/Oracle/Middleware1
            -movePlanLoc /scratch/oracle/t2pplans/nm/moveplan.xml
            -silent true

Table 20-11 describes the options for the pasteConfig script for Node Manager.

Table 20-11 Options for the pasteConfig Script for Node Manager

Options Shortcut Description Mandatory or Optional

-javaHome

None

The absolute path of the Java Developer's Kit.

The script detects if the operating system is 64 bit and passes the -d64 option to the scripts in the command line.

Mandatory

-archiveLoc

-al

The absolute path of the archive location. Use this option to specify the location of the archive file created by the copyConfig script.

Mandatory

-targetNMHomeLoc

-tnh

The absolute path of the target Node Manager.

Mandatory

-targetMWHomeLoc

-tmw

The absolute path of the target Middleware home in which the copy of Node Manager is to be applied.

Mandatory

-movePlanLoc

-mpl

The absolute path of the modified move plan in the target environment.

Mandatory

-logDirLoc

-ldl

The absolute path of a directory. If it does not exist, the script creates it. Clone and error log files are created in the directory. The default is the system Temp location.

Optional

-silent

None

Specifies whether the operation operates silently. That is, it does not prompt for confirmation. The default is that the operation prompts for confirmation. To continue, you must type yes, which is not case sensitive. Typing anything other than yes causes the script to return an error.

To specify that it does not prompt for confirmation, specify this option with the value of true.

Optional


20.2.1.12 obfuscatePassword Script

Generates a file that contains the obfuscated password. In the scripts and in the move plans, you often need to provide files containing passwords. The script prompts you to enter the password and the location where the password file is to be written.

The syntax is:

(UNIX) ORACLE_COMMON_HOME/bin/obfuscatePassword.sh
(Windows) ORACLE_COMMON_HOME\bin\obfuscatePassword.cmd

20.3 Modifying Move Plans

When you move Oracle Fusion Middleware components, you run the extractMovePlan script to create a move plan for the entity that you are moving. The extractMovePlan script extracts configuration information from the archive into a move plan. It also extracts any needed configuration plans. Before you apply the archive to the target, you must edit the move plan to reflect the values of the target environment.

You can modify properties with the scope of READ_WRITE. Do not modify the properties with the scope of READ_ONLY.

Notes:

  • Do not add, comment, or remove any section of a move plan.

  • You must generate a move plan using the extractMovePlan script each time you create an archive, even if you have made no changes to the move plan. If you use a move plan that was created with a different archive, the archive will not be accepted and the pasteConfig script will fail.

This section provides the following topics:

20.3.1 Locating configGroup Elements

Most move plans contain multiple configGroup elements. When a property is associated with a particular configGroup element, the tables listing the properties group the properties by configGroup element. For example, Table 20-14, which shows the properties for the move plan for Java components, shows multiple configGroup elements, such as SERVER_CONFIG and MACHINE_CONFIG.

The following example shows a portion of the move plan for Java components, with portions of the SERVER_CONFIG and MACHINE_CONFIG configGroup elements:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<movePlan>
    <movableComponent>
        <componentType>J2EEDomain</componentType>
        <moveDescriptor>
            <StartupMode>PRODUCTION</StartupMode>
            <configGroup>
                <type>SERVER_CONFIG</type>
                <configProperty id="Server1">
                    <configProperty>
                        <name>Server Name</name>
                        <value>AdminServer</value>
                        <itemMetadata>
                            <dataType>STRING</dataType>
                            <scope>READ_ONLY</scope>
                        </itemMetadata>
                    </configProperty>
           .
           .
           .
            </configGroup>
            <configGroup>
                <type>MACHINE_CONFIG</type>
                   <configProperty id="Machine1">
                      <configProperty>
                         <name>Machine Name</name>
                         <value>LocalMachine</value>
                         <itemMetadata>
                            <dataType>STRING</dataType>
                            <scope>READ_WRITE</scope>
                         </itemMetadata>
                      </configProperty>
                      <configProperty>
                         <name>Node Manager Listen Address</name>
                         <value>example.com</value>
                         <itemMetadata>
                            <dataType>STRING</dataType>
                            <scope>READ_WRITE</scope>
                         </itemMetadata>
                       </configProperty>
              .
              .
              .
            </configGroup>

20.3.2 Move Plan Properties

The tables in this section describe the move plan properties you can customize for Oracle Fusion Middleware entities and components.

Note:

Many move plan properties require that you provide the location of a file containing a password. If you want to use obfuscated passwords, you can use the obfuscatePassword script, as described in Section 20.2.1.12.

The properties that you edit differ depending on the type of component. Table 20-12 provides pointers to the appropriate list of properties for each component.

Table 20-12 Move Plan Properties for Components

Component Where to find the list of properties:

Node Manager

Table 20-13

All Java components

Table 20-14

Oracle Access Manager

Table 20-14, Table 20-33

Oracle Adaptive Access Manager

Table 20-14, Table 20-34

Oracle ADF connections

Table 20-15

Oracle B2B

Table 20-20

Oracle BI EE

Table 20-14, Table 20-15, Table 20-25, and optionally Table 20-26, Table 20-27, Table 20-28, Table 20-29

Oracle BI Publisher

Table 20-14, Table 20-15, Table 20-25

Oracle Business Activity Monitoring

Table 20-17

Oracle Data Integrator

Table 20-32

Oracle Essbase

Table 20-26

Oracle HTTP Server

Table 20-21

Oracle Identity Federation

Table 20-14, Table 20-24

Oracle Internet Directory

Table 20-22

Oracle Service Bus

Table 20-18

Oracle SOA Suite

Table 20-14, Table 20-15, Table 20-16

Oracle User Messaging Service

Table 20-14, Table 20-15, Table 20-16, Table 20-19

Oracle Virtual Directory

Table 20-23

Oracle WebCenter Content Server

Table 20-14, Table 20-15, Table 20-30

Oracle WebCenter Content: Imaging

Table 20-14, Table 20-15, Table 20-31

Oracle WebCenter Content: Inbound Refinery:

Table 20-14, Table 20-15, Table 20-30

Oracle WebCenter Content: Records

Table 20-14, Table 20-15, Table 20-30


Table 20-13 describes the move plan properties that you can change for Node Manager. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-13 Move Plan Properties for Node Manager

Property Description Sample Value

Properties in the NODE_MANAGER_PROPERTIES configGroup:

Node Manager configuration

 

Listen Address

The Listen address of Node Manager.

example.com

Listen Port

The number of the Listen port of Node Manage.

5557

Custom Identity KeyStore File

The absolute path of the custom identity keystore file location.

This property is present in the move plan only if the source environment is configured with SSL.

/scratch/Oracle/Middleware/wlserver_10.3/server/lib/example_identity.jks

Custom Identity Private Key Alias

The value of the identity key store alias.

This property is present in the move plan only if the source environment is configured with SSL.

mykey

Custom Identity Private Key Passphrase File

The absolute path to the secure file containing the private key used when creating a certificate.

This property is present in the move plan only if the source environment is configured with SSL.

/scratch/oracle/key_passwd

Properties in the DOMAINS configGroup:

Oracle WebLogic Server domain configuration

 

Domain Name

The name of the domain.

SOA_domain

Domain Location

The absolute path of the domain location.

/scratch/oracle/config/domains/SOA_domain

AdminServer Listen Address

The Listen address of the Administration Server.

example.com

AdminServer Listen Port

The number of the Listen port of the Administration Server.

7001

AdminServer User Name

The administration user name.

weblogic

AdminServer Password

The absolute path to the secure file containing the administration user's password.

/scratch/oracle/admin_passwd

Node Manager User Name

The Node Manager user name.

weblogic

Node Manager Password

The absolute path to the secure file containing the Node Manager user's password.

/scratch/oracle/nm_passwd

Table 20-14 describes the move plan properties that you can change for Java components. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-14 Common Move Plan Properties for Java Components

Property Description Sample Value

Startup Mode

The startup mode of an Oracle WebLogic Server domain.

Valid values are:

  • DEVELOPMENT. Use this mode while you are developing your applications. Development mode uses a relaxed security configuration and enables you to auto-deploy applications.

  • PRODUCTION. Use this mode when your application is running in its final form. A production domain uses full security and may use clusters or other advanced features.

The default is PRODUCTION.

PRODUCTION

Properties in the SERVER_CONFIG configGroup:

Common Java properties

 

Listen Address

The Listen address of the WebLogic Server. Set it to the host name or set it to All Local Addresses to listen on all addresses on the host.

All Local Addresses

Listen Port

The number of the Listen port.

If you do not provide a port number or if the port number you provide is not available, the operation returns an error.

8001

SSL Listen Port

The number of the SSL Listen port. This property is present in the move plan if SSL is enabled.

7002

Frontend Host

The host name of the HTTP Server.

This property is present in the move plan only if the HTTP Server is set as the frontend to the server.

example.com

Frontend HTTP Port

The number of the HTTP Server port.

This property is present in the move plan only if the HTTP Server is set as the frontend to the server.

10605

Custom Identity Keystore File

The absolute path of custom identity keystore file location.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter. The same type of store will be created in the target environment.

If the Startup Mode is PRODUCTION and SSL is enabled in the source environment (regardless of whether you use DemoTrust or CustomTrust), you must provide a value for this parameter.

/scratch/Oracle/Middleware/wlserver_10.3/server/lib/example_identity.jks

Custom Identity Keystore Passphrase File

The absolute path to the secure file containing the custom identity keystore password.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter.

If the Startup Mode is PRODUCTION and SSL is enabled in the source environment (regardless of whether you use DemoTrust or CustomTrust), you must provide a value for this parameter.

/scratch/oracle/i_passwd

Custom Trust Keystore File

The absolute path of custom trust keystore file location.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter.

If the Startup Mode is PRODUCTION and SSL is enabled in the source environment (regardless of whether you use DemoTrust or CustomTrust), you must provide a value for this parameter.

/scratch/Oracle/Middleware/wlserver_10.3/server/lib/example_trust.jks

Custom Trust Keystore Passphrase File

The absolute path to the secure file containing the custom trust keystore password.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter.

If the Startup Mode is PRODUCTION and SSL is enabled in the source environment (regardless of whether you use DemoTrust or CustomTrust), you must provide a value for this parameter.

/scratch/oracle/key_passwd

Custom Identity Private Key Alias

The private key alias.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter.

If the Startup Mode is PRODUCTION and SSL is enabled in the source environment (regardless of whether you use DemoTrust or CustomTrust), you must provide a value for this parameter.

fmw_key

Custom Identity Private Key Passphrase File

The absolute path to the secure file containing the custom identity private key password.

If the Startup Mode is DEVELOPMENT and the source environment uses DemoTrust as the keystore, you can leave this parameter blank. The same type of store will be created in the target environment.

If the Startup Mode is DEVELOPMENT and the source environment uses CustomTrust as the keystore, you must provide a value for this parameter.

/scratch/oracle/i_passwd

KeyStore Type

The keystore type. If the value is empty, the movement scripts will set the value to empty in the CustomIdentity and CustomTrust KeyStore Type and Oracle WebLogic Server will consider the keystore type to be jks. Valid values are jks, jceks, and PKC#12.

jks

Properties in the CLUSTER_CONFIG configGroup:

Oracle WebLogic Server Cluster configuration properties

 

Messaging Mode

The cluster messaging mode. Acceptable values are unicast and multicast.

multicast

Cluster Address

The cluster address.

localhost

Unicast Channel

The name of the unicast channel.

MyMulticastChannel

Multicast Address

The multicast address.

239.192.0.0

Multicast Port

The port number of the multicast address.

8899

Frontend Host

The name or IP address of the front-end host for the cluster.

example.com

Frontend HTTP Port

The HTTP port number for the front-end host for the cluster.

7008

Properties in the MACHINE_CONFIG configGroup:

Machine configuration properties

 

Machine Name

The name of the machine.

example.com

Node Manager Listen Address

The Listen address of the machine running Node Manager.

example.com

Node Manager Listen Port

The port number of the Listen address of the machine running Node Manager.

5556

Property in the DEPLOYMENT_PLAN_CONFIG configGroup:

Deployment plans

 

Application Name

The name of the application.

helloWorldEar

Deployment Plan

The location where an application's deployment plan is to be extracted. The location is relative to the location of the move plan.

deploy_plans/helloWorldEar_plan.xml

Properties in the AUTHENTICATORS configGroup:

Authenticator configuration

 

Host Name

The LDAP server host name.

example.com

Port

The LDAP server port number.

3060

Principal

The administration user for the LDAP server.

cn=orcladmin

Password File

The absolute path of a secure file containing the password for the LDAP user. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ldap_passwd

User Base DN

The user base distinguished name (DN).

cn=users,dc=us,dc=oracle,dc=com 

User Object Class

The user object class.

person

Group Base DN

The group base distinguished name (DN).

cn=groups,dc=us,dc=oracle,dc=com 

GUID Attribute

The global unique identifier.

orclguid

Properties in the DATASOURCE configGroup:

Data source configuration

 

Driver Class

The driver class of the data source. Refer to "Using JDBC Drivers with WebLogic Server" in the Oracle Fusion Middleware Configuring and Managing JDBC Data Sources for Oracle WebLogic Server to choose the appropriate class.

oracle.jdbc.OracleDriver

Url

The URL of the database for the data source. It contains the host name, database service name or SID, and the database port number.

jdbc:oracle:thin:@orcl.examplecom:1521/orcl.example.com

User

The schema name of the data source.

OFM_MDS

Password File

The absolute path to the secure file containing the password of the database schema. You must provide a password file, even if you are not changing the configuration of the data source.

/scratch/oracle/ds_passwd

ONS Node List

The list of Oracle Notification Service (ONS) hosts and ports, in the following format:

ons_host1:port1,ons_host2:port2
myhost1:6100,myhost2:6101

ONS Wallet File

The absolute path to the credential store file, which contains keys and certificates. This property is configured only if SSL is enabled.

/scratch/wallet

ONS Wallet Password File

The absolute path to the file containing the password for the wallet.

/scratch/ons_pass.txt

Properties in the OPSS_SECURITY configGroup, in the configProperty with the ID of LDAP.

LDAP-based policy and credential store configuration.

If the source is a file-based store, these properties (for the LDAP-based stores) as well as the properties for the database-based stores are present in the move plan. When you configure the move plan, you can change from a file-based to an LDAP or database-based store.

You can only use one type of store. To use one, uncomment the section in the move plan and ensure the other is commented.

If the source is LDAP-based, only the LDAP properties are present in the move plan. You cannot change it to a different type, but you can change the LDAP endpoints.

If the source is database-based, only the database properties are present in the move plan. You cannot change it to a different type, but you can change the database-based endpoints.

 

Password File

The absolute path to the secure file containing the password of the LDAP Server Administrative user. You must provide a password file, even if you are not changing the configuration of the LDAP Server.

/scratch/oracle/ldap_passwd

LDAP User

The LDAP Server administrative user name.

cn=orcladmin

Jps Root

The LDAP Server context root. This property is present in the move plan if the source is a file-based store. If the source is LDAP-based, the scripts create the JPS root on the target with the same name as the source.

cn=jpsRoot

Domain

The name of the domain. This property is present in the move plan if the source is a file-based store. If the source is LDAP-based, the scripts use the same name for the domain on the target as on the source.

SOA_domain

LDAP Url

The URL of the LDAP connection. It contains the host name and port number of the LDAP store.

ldap://example.com:3060

Properties in the OPSS_SECURITY configGroup, in the configProperty with the ID of DB:

Database-based policy and credential store configuration.

If the source is a file-based store, these properties (for the database-based stores), as well as the properties for the LDAP-based stores are present in the move plan. When you configure the move plan, you can change from a file-based to an LDAP or database-based store.

You can only use one type of store. To use one, uncomment the section in the move plan and ensure the other is commented.

If the source is LDAP-based, only the LDAP properties are present in the move plan. You cannot change it to a different type, but you can change the LDAP endpoints.

If the source is database-based, only the database properties are present in the move plan. You cannot change it to a different type, but you can change the database-based endpoints by changing the properties in the DATASOURCE configGroup.

 

Password File

The absolute path to the secure file containing the password of the OPSS schema owner. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ldap_passwd

DataSource Name

The name of the data source.

opssds

DataSource Jndi Name

The JNDI name of the data source.

jdbc/opss

Jps Root

The LDAP Server context root.

cn=jpsRoot

Domain

The name of the domain.

SOA_domain

Driver Class

The driver class of the data source. Refer to "Selecting a JDBC Driver" in the Oracle Fusion Middleware Configuring and Managing JDBC Data Sources for Oracle WebLogic Server to choose the appropriate class.

oracle.jdbc.OracleDriver

Url

The database URL of the data source. It contains the host name, the database port number, and the database service name or SID.

jdbc:oracle:thin:@hostname.com:1521:orcl

User

The name of the OPSS schema owner of the data source.

DEV_OPSS

Properties in the RDBMS Security Store configGroup:

Database-based security store configuration

 

URL

The database URL of the security store connection. It contains the host name, the database port number, and the database service name or SID.

jdbc:oracle:thin:@hostname.com:1521/example.com

Driver Class

The driver class of the RDBMS Security Store connection. Refer to "Using JDBC Drivers with WebLogic Server" in the Oracle Fusion Middleware Configuring and Managing JDBC Data Sources for Oracle WebLogic Server to choose the appropriate class.

oracle.jdbc.OracleDriver

User

The name of the schema owner.

admin

Password File

The absolute path to the secure file containing the password of the security store schema owner. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/rbms_passwd

Property in the ADAPTER configGroup:

Resource adapter configuration

 

Deployment Plan

The path to the deployment plan to be used during movement to the target. The path can be absolute, or relative to the location of the move plan.

The deployment plan is extracted by the extractMovePlan script.

/scratch/adapters/adapters.xml

Table 20-15 describes the move plan properties that you can change if you are using Oracle ADF connections. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment. The table is divided by component. For some components, the description column lists the OBJECT_NAME_PROPERTY type. You can search for the type to locate the relevant section.

Table 20-15 Move Plan Properties for Oracle ADF Connections

Property Description Sample Value

Oracle ADF URL Connection

OBJECT_NAME_PROPERTY type is URLConnProvider

 

Port

The port number used for the URL connections.

7000

URL

The URL used for the connection.

example.com

Oracle ADF Business Components Service Connection

OBJECT_NAME_PROPERTY type is ADFBCServiceConnection

ServiceEndpointProvider

The Business Components service endpoint provider.

ADFBC

JndiFactoryInitial

The JNDI initial factory class.

com.sun.java.jndi.InitialFactory

JndiProviderUrl

The URL of the JNDI provider.

t3://example.com:7101

JndiSecurityPrincipal

The JNDI security principal name.

weblogic

WebServiceConnectionName

The Web service connection name.

test

Oracle Enterprise Scheduler

OBJECT_NAME_PROPERTY type is EssConnection

NotificationServiceURL

The Oracle Enterprise Scheduler notification service URL.

http://localhost:8001

RequestFileDirectory

The path of the directory where request logs for jobs from OES ConcurrentProcessor (CP) extension is to be created.

/tmp/ess/requestFileDirectory

SAMLTokenPolicyURI

The SAML Policy URI to be used by CP extension.

oracle/wss11_saml_token_with_message_protection_service_policy

EssCallbackClientSecurityPolicyURI

The security policy to be used in the WS-Security headers for Web service invocations from Oracle Enterprise Scheduler for Web service callbacks.

oracle/wss11_saml_token_with_message_protection_client_policy

Oracle Business Activity Monitoring

   

WEBTIER_SERVER

The Oracle BAM Web server host.

example.com

USER_NAME

The Oracle BAM user name.

user

PASSWORD

The password for the Oracle BAM user.

bam_password

WEBTIER_SERVER_PORT

The port number for the Web server.

9001

BAM_SERVER_PORT

The JNDI port number.

8001

BAM_WEBTIER_PROTOCOL

The network protocol. The valid values are HTTP and HTTPS.

HTTP

BI Presentation Services connection

OBJECT_NAME_PROPERTY type is BISoapConnection

 

StaticResourcesLocation

The location where the browser should fetch Oracle BI EE static resources.

http://example.com:7001/analytics

WSDLContext

The Oracle BI EE context to use when making a Web services call.

analytics-ws

Host

The host where Oracle BI EE is located.

example.com

Port

The port that hosts the BI Presentation Services server.

10621

ShouldPerformImpersonation

Whether Oracle BI EE should perform impersonation. This should always be set to true.

true

Context

The Oracle BI EE context to use when fetching content.

analytics

Protocol

The protocol to use, depending on whether the Web server is configured with SSL.

http or https

IsStaticResourcesLocationAutomatic

The flag indicating whether to auto-generate the StaticResourcesLocation from the Host, Port, and Context fields.

true or false

Oracle Essbase

OBJECT_NAME_PROPERTY type is EssbaseConnProvider

Host

The host name for the Oracle Essbase server.

example.com

Cluster

The name of the cluster of which the Oracle Essbase server is a member.

esbCluster

Port

The Listen port number of the Oracle Essbase server.

1423

Username

The user name.

user3

Oracle Secure Enterprise Search in Oracle WebCenter Portal

The OBJECT_NAME_PROPERTY type is SesConnectionProvider

SoapURL

The Web services URL that Oracle SES exposes to enable search requests.

http:/example.com:port/search/query/OracleSearch

Oracle WebCenter Portal Content Repository

OBJECT_NAME_PROPERTY type is JCR

ServerHost

The host name of the machine where the Content Server is running.

example.com

ServerPort

The port number on which the Content Server listens.

4444

ServerWebUrl

The Web server URL for the Content Server.

http://example.com/cms/idcplg

Oracle WebCenter Portal Announcements and Discussions

OBJECT_NAME_PROPERTY type is ForumConnectionProvider

AdminUser

The name of the discussions server administrator. This account is used by the Discussions and Announcements services to perform administrative operations on behalf of WebCenter Portal users.

admin

Url

The URL of the discussions server hosting discussion forums and announcements.

http://example.com:8890/owc_discussions

Oracle WebCenter Portal External Applications

OBJECT_NAME_PROPERTY type is ExtAppConnectionProvider

Url

The login URL for the external application.

https://example.com/config/login?

Oracle WebCenter Portal Instant Messaging and Presence

OBJECT_NAME_PROPERTY type is RtcConnectionProvider

BaseConnectionURL

The URL of the server hosting instant messaging and presence services.

http://example.com:8888

Domain

The network domain.

example.com

ExternalAppId

The external application ID associated with the Presence server connection. If present, external application credential information is used to authenticate users against the instant messaging and presence server.

extApp

Oracle WebCenter Portal Mail Server

OBJECT_NAME_PROPERTY is MailConnectionProvider

ExternalAppId

The external application ID associated with the mail server.

extApp_Mail

ImapHost

The host name of the IMAP server.

example.com

ImapPort

The port number of the IMAP server.

993

ImapSecured

The flag indicating whether the mail server connection to the IMAP server is SSL-enabled. Valid values are true and false. The default is false.

true

SmtpHost

The host name of the computer where the SMTP (Simple Mail Transfer Protocol) service is running.

example.com

SmtpPort

The port number of the SMTP host.

587

SmtpSecured

The flag indicating whether the SMTP server is secured. Valid values are true and false. The default is false.

true

Oracle WebCenter Portal Personal Events

OBJECT_NAME_PROPERTY type is WebCenterPersonalEventConnectionProvider

ExternalAppId

The external application associated with the Microsoft Exchange Server providing personal events services. If specified, external application credential information is used to authenticate users against the Microsoft Exchange Server.

ExtPEApp

WebServiceURL

The URL of the Web service exposing the event application.

http://example.com:80/ExchangeWS/PersonalEventsWebService.asmx

Oracle WebCenter Portal WSRP Producers

OBJECT_NAME_PROPERTY type is WSRPProducerConnection

ProxyHost

The host name or IP address of the proxy server.

example.com

ProxyPort

The port number of the proxy server.

80

Oracle WebCenter Portal PDK-Java Producers

OBJECT_NAME_PROPERTY type is WebProducerConnection

Host

The host name of the proxy server to be used for the PDK Java Producer connection.

example.com

Port

The port number to be used for the PDK Java Producer connection.

80

URL

The URL for the PDK Java Producer connection.

http:/example.com:port

Oracle WebCenter Portal Worklists

OBJECT_NAME_PROPERTY type is BPEL

URL

The URL required to access the BPEL server. The BPEL server URL must be unique within the WebCenter application.

protocol://example:port

Oracle Web Services

OBJECT_NAME_PROPERTY type is WebServiceConnection

WsdlUrl

The URL for the WSDL.

http://example.com:port/MyWebService1?WSDL

Oracle Web Services

OBJECT_NAME_PROPERTY type is Port

AddressUrl

The service endpoint URL.

http://example.com:port/MyWebService1

ProxyHost

The name of the host on which the proxy server is running.

example.com

ProxyPort

The port number to which the proxy server is listening.

80

Table 20-16 describes the move plan properties that you can change for Oracle SOA Suite. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-16 Move Plan Properties for Oracle SOA Suite

Property Description Sample Value

Property in the Composite configGroup:

SOA Composites configuration

 

Config Plan Location

The location of the configuration plan to be used during movement to the target to redeploy the composite application. The path can be absolute, or relative to the location of the move plan.

The plan is extracted during the extractMovePlan script.

/scratch/app/config_plan.xml

Table 20-17 describes the move plan properties that you can change for Oracle Business Activity Monitoring. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-17 Move Plan Properties for Oracle Business Activity Monitoring

Property Description Sample Value

ApplicationURL

The URL for Oracle BAM web applications and Oracle BAM Server.

Note that you do not need to update this value, unless the Oracle BAM web applications and Oracle BAM Server are deployed on separate hosts.

http://DEFAULT:0000

DURABLE_SUBSCRIBER_NAME

The durable subscriber name to be used for the EMS sample value.

myDURABLE_SUBSCRIBER_NAME

INITIAL_CONTEXT_FACTORY

The initial context factory to be used for the EMS sample value.

weblogic.jndi.WLInitialContextFactory

JNDI_URL

The JNDI URL for EMS.

t3://example.com:7001

JNDI_USERNAME

The JNDI user name.

myJMSUserName

JNDI_PASSWORD_FILE

The absolute path of a secure file containing the password. You must provide a password file, even if you are not changing the configuration.

/scratch/pass/jndi_pass.txt

JMS_USERNAME

The JMS user name.

user1

JMS_PASSWORD_FILE

The absolute path of a secure file containing the password. You must provide a password file, even if you are not changing the configuration.

/scratch/pass/jms_pass.txt

Table 20-18 describes the move plan properties that you can change for Oracle Service Bus. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-18 Move Plan Properties for Oracle Service Bus

Property Description Sample Value

osb.configuration.passphrase.file

The absolute path to the passphrase file. The file must be accessible on the target environment.

This property is required if you passed the osb.configuration.passphrase.file to the copyConfig script using the -additionalParams option.

The passphrase must be the same as the one for the source environment.

/scratch/passwd/osb_passwd

Table 20-19 describes the move plan properties that you can change for Oracle User Messaging Service. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-19 Move Plan Properties for Oracle User Messaging Service

Property Description Sample Value

Properties for the componentType UMS:

These properties apply to all driver types.

DefaultSenderAddress

The default address of the sender.

SMS:1234

SenderAddresses

The list of sender addresses that the driver supports.

SMS:1234

Properties in the EmailDriver componentType:

These properties apply to email drivers.

IncomingMailServer

The host name of the incoming mail server.

umsdemo.example.com

IncomingMailServerPort

Port number of IMAP4 (that is, 143 or 993) or POP3 (that is, 110 or 995) server.

110

IncomingUserIDs

The list of user names of the mail accounts from which the driver instance is polling. Each name must be separated by a comma, for example, user1,user2.

username.pop3@umsdemo.example.com

IncomingMailIDs

The email addresses corresponding to the user names. Each email address is separated by a comma and must reside in the same position in the list as its corresponding user name appears on the usernames list.

username.pop3@umsdemo.example.com

IncomingUserPasswords

The absolute path of a secure file containing the password. You must provide a password file, even if you are not changing the configuration.

The file contains a list of passwords corresponding to the user names. Each password is separated by a comma and must reside in the same position in the list as their corresponding user name appears on the usernames list.

/scratch/oracle/ums_in_passwd.txt

OutgoingMailServer

The name of the SMTP server.

umsdemo.example.com

OutgoingMailServerPort

The port number of the SMTP server.

25

OutgoingDefaultFromAddr

The default FROM address (if one is not provided in the outgoing message).

username.pop3@umsdemo.example.com

OutgoingUsername

The username used for SMTP authentication.

username.pop3@umsdemo.example.com

OutgoingPassword

The absolute path of a secure file containing the password used for SMTP authentication. This is required only if SMTP authentication is supported by the SMTP server. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ums_out_passwd.txt

Properties in the ExtensionEndpoint configGroup:

These properties apply to extension drivers.

EndpointURL

Remote endpoint listener URL

http://hostname:7001/myapp-war/extension

mappedDomain

The extension endpoint used to deliver messages where the domain part of the recipient URI matches this value.

test

Properties in the SMPPDriver componentType:

These properties apply to SMPP drivers.

SmsAccountId

The Account Identifier on the SMS-C.

myusername

SmsServerHost

The name (or IP address) of the SMS-C server.

example_host

TransmitterSystemId

The account ID that is used to send messages.

myusername

ReceiverSystemId

The account ID that is used to receive messages.

myusername

TransmitterSystemType

The type of transmitter system.

Logica

ReceiverSystemType

The type of receiver system.

Logica

ServerTransmitterPort

The TCP port number of the transmitter server.

9001

ServerReceiverPort

The TCP port number of the receiver server.

9001

TransmitterSystemPassword

The absolute path of a secure file containing the password of the transmitter system You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ums_trans_passwd.txt

ReceiverSystemPassword

The absolute path of a secure file containing the password of the receiver system You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ums_rec_passwd.txt

Property in the WorklistDriver componentType:

This property applies to the Worklist drivers.

BPELConnectionURL

The URL of the BPEL server to connect to. The format is 'http://bpel-host:bpel-port'. The default behavior, if this property is not set, is to use the local container's HTTP connection URL.

http://host.example.com:port

Properties in the XMPPDriver componentType:

These properties apply to XMPP drivers.

IMServerHost

The Jabber/XMPP server host name.

example.domain.com

IMServerPort

The corresponding Jabber/XMPP server port. The default is 5222.

5222

IMServerUsername

The Jabber/XMPP username with which you log in. You may also enter a complete Jabber ID if its domain name is different from the Jabber/XMPP server host name.

myUserName@xmpp-domain

IMServerPassword

The absolute path of a secure file containing the corresponding password for the IMServerUsername. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ums_im_passwd.txt

Table 20-20 describes the move plan properties that you can change for Oracle B2B. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-20 Move Plan Properties for Oracle B2B

Property Description Sample Value

Property in the File.DeliveryChannel configGroup:

File Delivery Channel configuration.

 

file-param-folder

The absolute path of the folder.

/tmp/file_deliv

Property in the File.ListeningChannel configGroup:

File Listening Channel configuration.

 

file-param-folder

The absolute path of the folder.

/tmp/file_listen

Properties in the JMS configGroup:

JMS configuration. Each channel has its own set of property values.

 

jms-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

jms-param-is_topic

A flag specifying whether or not this is a configured destination topic. Valid values are true and false.

false

jms-param-queue_name

The JNDI name of the queue or topic.

jms/b2b/B2B_IN_QUEUE

jms-param-DestinationProviderProperties

The JMS destination provider properties. Use a semicolon (;) as the separator for each key/value pair.

java.naming.provider.url=t3://example.com:7001;java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.security.principal=weblogic;java.naming.security.credentials=weblogic

jms-param-user

The JMS user name.

user1

Properties in the FTP configGroup:

FTP configuration. Each channel has its own set of property values.

 

ftp-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

ftp-param-folder

The absolute path of the folder.

/tmp/test1

ftp-param-host

The FTP host name.

example

ftp-param-preserve_filename

A flag that specifies whether the file name will be preserved. Valid values are true and false.

false

ftp-param-user

The FTP user name.

User

Properties in the HTTP configGroup:

HTTP configuration. Each channel has its own set of property values.

 

http-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

http-param-use_proxy

A flag that specifies whether to use a proxy server. Valid values are true and false.

false

http-param-additional_headers

Additional transport headers, for example, headers for digest authentication.

http-param-url

The fully qualified HTTP URL.

http://example:8001/b2b/httpReceiver

Properties for the SFTP transport protocol:

The SFTP configuration.

 

sftp-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

sftp-param-host

The SFTP host name.

example

sftp-param-port

The SFTP port number.

22

sftp-param-folder

The absolute path of the folder.

/scratch/b2b/sftp

sftp-param-user

The name of the SFTP user.

user1

Properties for the Email transport protocol:

The email configuration.

 

email-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

email-param-host

The email host name.

example

email-param-user

The email user name.

user1

email-param-email-id

The email address to which messages are delivered (similar to specifying the path for a file channel or queues in AQ or JMS).

user1@exampleb2b.com

Properties for the AQ transport protocol:

The AQ configuration.

 

aq-param-password

The absolute path of a secure file containing the password. If a password file is not provided, the value will not be set in target.The source configuration will be retained.

/tmp/password/pass.txt

aq-param-datasource

The JNDI name of the JDBC data source to access AQ queues.

jdbc/SOADataSource

aq-param-recipient

The value used when delivering a message to the AQ queue.

testuser

aq-param-queue_name

The AQ queue name.

IP_OUT_QUEUE

aq-param-consumer

The client that receives the message.

b2buser

Properties for the TCP transport protocol:

The TCP configuration.

 

tcp-param-host

The TCP host name.

example

tcp-param-port

The TCP port number.

23456

tcp-param-PermanentConnectionType

A flag indicating whether or not a cached connection is used to exchange all the messages. Valid values are true and false.

false

tcp-param-timeout

The TCP timeout, in seconds.

300

Table 20-21 describes the move plan properties that you can change for Oracle HTTP Server. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

For Oracle HTTP Server, there are many configGroup elements in the move plan. Each configGroup element is associated with one Oracle HTTP Server configuration file. As a result, there may be more than one instance of a particular property, such as User.

Table 20-21 Move Plan Properties for Oracle HTTP Server

Property Description Sample Value

Listen

The Listen address. It can include the host name and port or just the port.

orcl3.example.com:8888 or 8888

User

The Oracle HTTP Server administration user.

admin_user

Group

The group for the user.

admin_group1

ServerAdmin

The administrator's email address.

Webmaster@example.com

ServerName

The name of the server for Oracle HTTP Server. If the host does not have a registered DNS name, use the IP address.

orcl1.example.com

WebLogicHost

The name of the host on which Oracle WebLogic Server is listening for requests.

orcl2.example.com

WebLogicPort

The port number that Oracle WebLogic Server uses to listen for requests.

9002

WebLogicCluster

The name of the host on which an Oracle WebLogic Server cluster is running and its port number.

orcl3.example.com:9003

VirtualHost

The name of the virtual host. The port number listed should also be listed in the Listen directive.

*.8888

PlsqlDatabasePassword

Specific to the PLSQL module, the name of a secure file containing the password. You must provide a password file, even if you are not changing the configuration.

/scratch/orcl/plsql_passwd

PlsqlDatabaseConnectString

Specific to the PLSQL module, the service name of the database.

orcl.example.com:1521:orcl1

PlsqlNLSLanguage

Specific to the PLSQL module, the NLS_LANG variable for the database access descriptor (DAD).

America_America.UTF8

ORAConnectSN

Specific to the oradav module, the Oracle database to which to connect.

db_host:db_port:db_service_name

ORAUser

Specific to the oradav module, the database user (schema) to use when connecting to the service specified by the ORAConnectSN property.

db6175_PORTAL

ORACRYPTPASSWORD

Specific to the oradav module, the absolute path to the secure file containing the password for oradav. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/dav_passwd

SSLWallet

The location of the SSL wallet, if the wallet is not in the default location.

/scratch/oracle/mw_home/ORACLE_INSTANCE/config/OHS/ohs1/keystores/mywallets

DocumentRoot

The directory that stores the main content for the Web site.

/scratch/oracle/mw_home/ORACLE_INSTANCE/config/ohs/ohs1/htdocs

Alias

The location of the alias, if it is not in the default location. Note that you change the value within the double quotation marks.

/icons/"/scratch/orcl/icons/"

ScriptAlias

The location of the script alias, if it is not in the default location. Note that you change the value within the double quotation marks.

/cgi-bin/"/scratch/oraclcgi-bin/"

WebGateInstalldir

The location of the WebGate installation directory, as specified in the webgate.conf file.

/scratch/oracle/mw_home/Oracle_OAMWebGate1/webgate/ohs

primaryOAMServerHost

The primary Oracle Access Manager server host.

Note that the configuration for the secondary Oracle Access Manager server host is updated automatically the first time that WebGate communicates with the primary server.

primary_oam_server_host.example.com

primaryOAMServerPort

The port number for the Oracle Access Manager primary host.

5575

Table 20-22 describes the move plan properties that you can change for Oracle Internet Directory. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-22 Move Plan Properties for Oracle Internet Directory

Property Description Sample Value

OID Non SSL Port

The non-SSL port for Oracle Internet Directory.

If you do not provide a port number or if the port number you provide is not available, the operation uses an available port.

3060

OID SSL Port

The SSL port for Oracle Internet Directory.

If you do not provide a port number or if the port number you provide is not available, the operation uses an available port.

3131

Namespace

The Oracle Internet Directory namespace.

dc=us,dc=oracle,dc=com

OID Admin Password

The absolute path of a secure file containing the password for the Oracle Internet Directory administrator. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/oid_passwd

ODS Schema Password

The absolute path of a secure file containing the password for the ODS schema, which is the schema that contains metadata for Oracle Internet Directory. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/ods_passwd

ODSSM Schema Password

The absolute path of a secure file containing the password for the ODSSM schema, which is used to access server manageability information for Oracle Internet Directory from the database. You must provide a password file, even if you are not changing the configuration.

/scratch/oracle/odssm_passwd

DB Host Name

The name of the host on which the database is running, which can be found in the tnsnames.ora file.

example.com

DB Port

The port number of the database listener, which can be found in the tnsnames.ora file.

1521

DB Service Name

The service name for the database, which can be found in the tnsnames.ora file.

orcl.example.com

Table 20-23 describes the move plan properties that you can change for Oracle Virtual Directory. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-23 Move Plan Properties for Oracle Virtual Directory

Property Description Sample Value

OVD Non SSL Port

The LDAP non-SSL port number for Oracle Virtual Directory.

If you do not provide a port number or if the port number you provide is not available, the operation uses the next available port.

6501

OVD SSL Port

The LDAP SSL port number for Oracle Virtual Directory.

If you do not provide a port number or if the port number you provide is not available, the operation uses the next available port.

7501

OVD Admin Port

The administration port number for Oracle Virtual Directory.

If you do not provide a port number or if the port number you provide is not available, the operation uses the next available port.

8899

OVD Http Port

The HTTP listener port number for Oracle Virtual Directory.

8080

host.port

The host name and port for the Oracle Virtual Directory adapter.

example.com:3060

username

The user name for the Oracle Virtual Directory adapter.

cn=orcladmin

root

The root for the Oracle Virtual Directory adapter.

dc=us,dc=oracle,dc=com

remotebase

The remote base for the Oracle Virtual Directory adapter.

dc=us,dc=oracle,dc=com

password

The absolute path of a secure file containing the password for the Oracle Virtual Directory adapter user.

/scratch/oracle/ovd_passwd

Table 20-24 describes the move plan properties that you can change for Oracle Identity Federation. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-24 Move Plan Properties for Oracle Identity Federation

Property Description Sample Value

Properties in the ServerConfig configProperty:

Server configuration

 

Load Balancer Hostname

The name of the host of the Load Balancer.

example.com

Load Balancer Port

The port number of the Load Balancer.

7500

SOAP Port

The SOAP port number.

7500

SSL Enabled

The flag indicating that SSL is enabled. Valid values are true and false.

true

SOAP SSL Enabled

The flag indicating that SSL is enabled for SOAP. Valid values are true and false.

true

Properties in the User Data Store configProperty:

The user data store configuration. These properties are present in the move plan if the user data store uses LDAP.

 

LDAP Server URL

The URL of the LDAP connection. The property contains the host name and port number of the LDAP store.

ldap://example.com:389

LDAP Username

The LDAP Server administrative user name.

cn=orcladmin

LDAP Password File

The absolute path of a secure file containing the password for the administrative user.

/scratch/oracle/oif_ds_passwd

Properties in the Federation Data Store configProperty:

Federation data store configuration. These properties are in the move plan if the federation data store uses LDAP.

 

LDAP Server URL

The URL of the Federation LDAP connection. It contains the host name and port number of the Federation LDAP store.

ldap://example.com:389

LDAP Username

The Federation LDAP Server administrative user name.

cn=orcladmin

LDAP Password File

The absolute path of a secure file containing the password for the Federation LDAP administrative user.

/scratch/oracle/oif_fed_passwd

Properties in the AuthnEngine configProperty:

Authentication engine configuration. There may be multiple Authentication engines, which are independent of each other.

 

LDAP Connection URL

The URL of the LDAP connection. It contains the host name and port number of the LDAP store. This property is present in the move plan if LDAP is enabled as an Authentication Engine.

ldap://example.com:389

LDAP Username

The LDAP administrative user name. This property is present in the move plan if LDAP is enabled as an Authentication Engine.

cn=orcladmin

LDAP Password File

The absolute path of a secure file containing the password for the administrative user. This property is present in the move plan if LDAP is enabled as an Authentication Engine.

/scratch/oracle/oif_ae_pwd_passwd

OAM11g Logout URL

The URL for logging out of Oracle Access Manager 11g. It contains the host name and port number of Oracle Access Manager 11g. This property is present in the move plan if Oracle Access Manager 11g is enabled as an Authentication Engine.

http://oam11g_host:oam11g_port/logout.jsp

HTTP Header Logout Redirect URL

The URL for logging out. It contains the host name and port number of the Oracle HTTP Server. This property is present in the move plan if HTTP Header is enabled as an Authentication Engine.

http://example.com:port/logout.jsp

Properties in the SPEngine configGroup:

The SP engine configuration. There may be multiple SP engines, which are independent of each other.

 

OAM11g Login URL

The URL for logging in to Oracle Access Manager 11g. It contains the host name and port number of Oracle Access Manager 11g. This property is present in the move plan if an SP Engine uses Oracle Access Manager 11g.

http://oam11g_hostname:oam11g_port/login

OAM11g Logout URL

The URL for logging out of Oracle Access Manager 11g. It contains the host name and port number of Oracle Access Manager 11g. This property is present in the move plan if an SP Engine uses Oracle Access Manager 11g.

http://oam11g_host:oam11g_port/logout.jsp

Table 20-25 describes the move plan properties that you can change for Oracle BI EE and Oracle BI Publisher. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-25 Move Plan Properties for Oracle BI EE and Oracle BI Publisher

Property Description Sample Value

Properties in the XMLP-SERVER-CONFIG configGroup:

Oracle BI Publisher configuration

 

SAW_SERVER

The name of the host that is running the Oracle BI Presentation Services to which you must connect.

example_host

SAW_PORT

The port number for connecting to Oracle BI Presentation Services.

10217

SAW_PASSWORD

The absolute path of a secure file that contains the password for Oracle BI Presentation Services.

/scratch/oracle/bip_passwd

SAW_USERNAME

The user name for Oracle BI Presentation Services.

user1

Properties in the XMLP-DATASOURCES configGroup:

Data source configuration

 

Properties in the connection configProperty:

A sub-property of dataSource. Specifies that the data source is a Connection type.

Each data source can be either a Connection or File type.

url

The URL of the connection.

jdbc:oracle:thin:@host:port:sid

driver

The driver to use for the connection

oracle.jdbc.OracleDriver

username

The user name for the connection.

user1

password

The absolute path of a secure file that contains the password for the connection.

/scratch/oracle/ds_conn_passwd

Property in the file configProperty:

A sub-property of dataSource. Specifies that the data source is a File type.

 

path

The file system path that points to the relevant data source file.

//scratch/oracle/config/domains/BIDomain/config/bipublisher/repository/DemoFiles

Properties in the XDO-CLIENT_CONFIG configGroup:

Oracle BI Publisher client

 

XMLPClientDirPath

The absolute path to the Oracle BI Publisher client directory.

/scratch/instance/domains/example.com/CommonDomain/config

* (any name)

The Oracle BI Publisher configured endpoint connecting URL. The move plan may have more than one endpoint.

http://example.com:10621/xmlpserver

Properties in the XMLP-SCHEDULER-JMS-CONFIG configGroup:

The Scheduler configuration

 

JMS_WEBLOGIC_JNDI_URL

The Oracle WebLogic Server JNDI URL for the Oracle BI EE Managed Server.

cluster:t3://bi_cluster

JMS_Shared_Temp_Directory

The JMS shared temp directory used in an Oracle BI EE cluster environment.

/scratch/oracle/instance/instance1/BIPublisher/biptemp

Properties in the XMLP-PROVIDER-CONFIG configGroup, in the provider configProperty:

Oracle BI Publisher provider

There is a separate configProperty for each BI Publisher provider configured.

 

uri

The URI for the Oracle BI Publisher provider.

http://example.com:10603/bip

nonSSOUri

The non-SSO URI for the Oracle BI Publisher provider.

bip

Property in the XDO-SERVER_CONFIG configGroup:

Oracle BI Publisher Server

 

XMLPServerConfigDirPath

The absolute path to the Oracle BI Publisher server configuration directory.

/scratch/oracle/config/domains/BIDomain/config/bipublisher

Property in the RepositoryDirPath configProperty:

The directory path of the Oracle BI Publisher server repository.

 

path

The directory of the Oracle BI Publisher server configuration repository. (It can be located outside of the BIDomain that is specified as the server xdo.server.config.dir' system property.) The default value is ${xdo.server.config.dir}/repository.

/scratch/oracle/instance/instance1/BIPublisher/repository

Property in the SawSourcePath configProperty:

The Oracle BI Publisher server connection resource details for the Oracle BI EE Presentation Server

 

source

The path for the Oracle BI Publisher repository directory.

/scratch/oracle/config/domains/BIDomain/config/bipublisher/repository

Properties in the OracleInstances configGroup:

Oracle BI EE domain configuration

 

instanceHome

The path of the Oracle instance in which Oracle BI EE is deployed.

scratch/oracle/Middleware/instances/instance1

host

The host where the Oracle BI EE Oracle instance is configured.

example.com

Properties in the BIInstanceDeployment configProperty:

Instance configuration details.

 

listenAddress

The listen address for the host. It can be set to a virtual IP address or a subset on a multi-homed computer. You can specify an asterisk to specify multiple network addresses for the host.

example.com
*

portRangeStart

The start of the range of ports used by the Oracle BI EE system components.

10206

portRangeEnd

The end of the range of ports used by the Oracle BI EE system components.

10214

Properties in the BIInstance configGroup, in the EmailOptions configProperty:

Oracle BI EE instance configuration

 

smtpServerName

The host name of the SMTP server.

example.com

port

The port number of the SMTP server.

25

fromDisplayName

The sender's name that is used as the display name by the Oracle BI EE system when it sends email.

Oracle Business Intelligence

emailAddressOfSender

The email address used by the Oracle BI EE system when it sends email.

defaultuser@defaultmailserver.com

Property in the BIInstance configGroup, in the MarketingOptions configProperty:

Oracle BI EE instance configuration

 

url

The base URL used by the Oracle BI EE system when the emails have embedded URLs.

http://example.com:7012/_dav/cs/idcplg

Property in the BIInstance configGroup, in the PresentationServerOptions configProperty:

Presentation Server configuration.

 

webCatalogLocation

The absolute path of the location of the Oracle BI Presentation Catalog.

/scratch/oracle/instance/instance1/OracleBIPresentationServicesComponent/coreapplication_obips1/catalog/OracleBIApps

Property in the BIInstance configGroup, in the Scheduler configProperty:

Scheduler configuration

 

dataSource

The connection details for the Oracle BI Scheduler data source.

(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=example.com)(PORT=1565)))(CONNECT_DATA=(SERVICE_NAME=d8b4lfc1))

Properties in the BIInstance configGroup, in the ServerOptions configProperty:

Server options configuration

 

repositoryDataSourceName

The name of the data source for the Oracle BI repository (RPD) file.

Star

repositoryName

The name of the RPD.

OracleBI_BI0002

repositorySharedLocation

The shared location for the RPD.

/scratch/oracle/instance/BIShared/OracleBIServerComponent/coreapplication_obis1/repository

Property in the BIInstance configGroup, in the PerformanceOptions configProperty:

Performance options configuration

 

globalCacheStoragePath

The global location of the Oracle BI EE server cache.

/scratch/oracle/instance/instance1/OracleBIServerComponent/coreapplication_obis1/cache

Properties in the DEPLOY_USER_CREDENTIALS configGroup:

Oracle RTD Inline Services (BI_RTD_SPE_ILS_DEPLOY_CONFIG)

 

username

The user name used to deploy the RTD SPE inline service.

weblogic

password

The absolute path of a secure file that contains the password for the connection.

/scratch/oracle/rtd_passwd

Properties in the CONNECTIONPOOLS configGroup:

RPD configuration

 

user

Connection pool user name (the database schema name). The name may be a variable, in the format VALUE_OF(varname) which would then appear in the VARIABLES configGroup.

VALUEOF(ORACLE_INITBLOCK_USER)

datasource

RPD connection pool data source name or definition. The name may be a variable, in the format VALUE_OF(varname) which would then appear in the VARIABLES configGroup.

VALUEOF(ORACLE_INITBLOCK_DSN)

appServerName

If this is an ADF connection, the Business Component URL.

http://example.com:10603/fscmAnalytics/obieebroker

password

The absolute path of a secure file that contains the password for the connection to the RPD data source.

/scratch/oracle/rpd_ds_conn_passwd

Properties in the VARIABLES configGroup:

Definition of variables

 

name

The name of the variable that is used in the RPD connection pool definitions. There can be multiple name/value pairs.

ORACLE_INITBLOCK_USER

value

The value of the variable that is used in the RPD connection pool definitions. There are multiple name/value pairs.

'ORA_INIT_USER'

Table 20-26 describes the move plan properties that you can change for Oracle BI EE Data Warehouse Administration Console. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-26 Move Plan Properties for Oracle BI EE Data Warehouse Administration Console (DAC)

Property Description Example

Properties in the DAC-SERVER-CONFIGURATION configGroup:

DAC configuration

jdbc.url

The URL to connect to the DAC repository.

jdbc:oracle:thin:@example.com:1521/example.com

jdbc.driver

The name of the JDBC driver.

oracle.jdbc.driver.OracleDriver

Username

The user name used to connect to the DAC repository.

IMPORT_DAC

Password File

The absolute path of a secure file containing the password for the user to connect to the DAC repository. You must provide a password file, even if you are not changing the configuration.

/scratch/biplatform/cloning/dac_passwd

Properties in the EMAIL-CONFIGURATION configGroup:

Email configuration

email_host

The host name of the email server.

example

email_protocol

The protocol for the email server.

smtp

email_address

The email address of the user.

test@test.te

needs_authentication

The flag indicating whether the corporate email server requires authentication. Valid values are true or false.

true

needs_ssl

The flag indicating whether an SSL connection is required. Valid values are true or false.

false

email_host_port

The port where the email server listens.

5555

email_user

User name for the email account.

test

email_password

The absolute path of a secure file containing the password for the user of the email server. (Only required if needs_authentication is true.)

/scratch/biplatform/cloning/email_passwd

Properties in the DATAWAREHOUSE-CONFIGURATION configGroup:

Data Warehouse configuration

jdbc.url

The URL to connect to the Data Warehouse.

jdbc:oracle:thin:@example.com:1521/example.com

jdbc.driver

The name of the JDBC driver.

oracle.jdbc.driver.OracleDriver

Username

The user name used to connect to the Data Warehouse.

IMPORT_DW

Password File

The absolute path of a secure file containing the password for the user to connect to the Data Warehouse. You must provide a password file, even if you are not changing the configuration.

/scratch/biplatform/cloning/DW_passwd

Properties in the INFORMATICA-CONFIGURATION configGroup:

Informatica configuration

Informatica server home

The Informatica server home.

/scratch/infahome/

Domains infa file location

The domain's infa file location.

/scratch/infahome/domains.info

InformaticaParameterFileLocation

The directory where the Informatica parameter files are stored (or DEFAULT).

DEFAULT

Properties in the DATASOURCES-CONNECTION-DETAILS configGroup:

Data source connection information

type

The physical data source type. Possible values are: Source, Warehouse, Informatica Repository, DAC Repository, Other.

Source

Connection Type

The type of database connection. Possible values are: BI Server, Oracle (OCI8), Oracle (Thin), DB2, DB2-390, MSSQL, Teradata, Flat File.

Oracle (Thin)

Connection String

The data source connection string. If you are using:

  • Oracle (OCI8): Use the tnsnames entry.

  • Oracle (Thin): Use the instance name. SQL Server: Use the database name.

  • DB2-UDB/DB2-390: Use the connect string as defined in the DB2 configuration.

  • Teradata: Use the database name.

orcl.example.com

Table Owner

The user name of the table owner.

DB_USER

Host

The host name of the server where the database resides.

example.com

Port

The port number where the database receives requests.

1521

JDBC Driver (Optional)

The JDBC driver for the data source connection. The value in this field must conform to the database specifications.

oracle.jdbc.driver.OracleDriver 

URL (Optional)

The JDBC URL for the data source connection. The value in this field must conform to the database specifications.

jdbc:oracle:thin:@example.com:1521/orcl.example.com

Password File

The absolute path of a secure file containing the password for the user to connect to the data source. You must provide a password file, even if you are not changing the configuration.

/scratch/biplatform/cloning/ds_passwd

Connection Pool Name (BIPool)

The connection pool name.

FSCM_OLTP."Connection Pool"

Database Type (BIPool)

Database type of the transactional data source.

Oracle

Properties in the EXTERNAL-EXECUTORS configGroup:

External executors configuration

Execution type

The execution type for the tasks that will be executed by the external executor.

ODI 11g Embedded Agent

name

The name of the property that must be configured to integrate DAC with other Extract, Transform, and LoadExtract, Transform, and Load (ETL) tools. There are multiple properties for the external executors. Name is the name of the property. Value is the value that defines the property.

<name>ODIUser</name> 
<value>TestUser</value>

Table 20-27 describes the move plan properties that you can change for Oracle Essbase. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-27 Move Plan Properties for Oracle Essbase

Property Description Example

Properties in the EssbaseAgentConfig configGroup:

Oracle Essbase configuration

 

ARBORPATH

The absolute path for ARBORPATH.

/scratch/oracle/shared_essbase

PortRange

The port range for Oracle Essbase.

9000-9499

agent-port

The port number of the Oracle Essbase agent.

9799

EssbaseAdminUserName

The administration user name for Oracle Essbase.

weblogic

EssbaseAdminPassword

The absolute path of a secure file containing the password for the Oracle Essbase administration user.

/scratch/oracle/essbase_passwd

Properties in the ASOAppsTableSpaceCustomizations configGroup:

Aggregate Storage (ASO) application configuration.

Each aggregate storage (ASO) application has a name and Table Space property, followed by the properties in the configGroup.

 

file_location

The absolute path of the application file.

/scratch/oracle/aso

max_file_size

The maximum size of the file, in Bytes.

1.34217727E8

max_disk_size

The maximum size of the disk, in Bytes.

4.294967295E9

Properties in the BSOAppsDiskVolumeCustomizations configGroup:

Block Storage (BSO) application configuration.

Each Essbase block storage (BSO) application has a name and database name property, followed by the properties in the configGroup.

 

volume

The location of the disk volume.

/scratch/biplatform

file_type

The file type of the disk volume, such as index, data, or index_data.

index_data

file_size

The size of the volume, in Bytes.

2.147483648E9

partition_size

The size of the partition, in Bytes.

9.007199254739968E15

Table 20-28 describes the move plan properties that you can change for the EPM registry. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-28 Move Plan Properties for the EPM Registry

Property Description Example

Properties in the reg.properties configGroup:

EPM Registry

 

jdbc.url

The URL to connect to the EPM Registry database.

jdbc:oracle:thin:@example.com:17328/example.com

jdbc.driver

The name of the JDBC driver.

oracle.jdbc.OracleDriver

username

The user name used to connect to the EPM database.

USER_BIPLATFORM

password

The absolute path of a secure file containing the password for the user to connect to the EPM database. You must provide a password file, even if you are not changing the configuration.

/scratch/biplatform/epm_jdbc_passwd

Properties in the EPM_COMPONENTS configGroup, in the DATABASE_CONN configProperty:

EPM components configuration

host

The database server host name.

example.com

dbUserName

The database user name.

FUSION_BIPLATFORM

dbJdbcUrl

The JDBC URL to connect to the database.

jdbc:oracle:thin:@example.com:1570/db20258

dbName

The database name. For Oracle Database, use the service name or SID.

db20258

dbPort

The database port number.

1570

dbPassword

The absolute path of a secure file containing the password for the user to connect to the database. You must provide a password file, even if you are not changing the configuration.

/scratch/biplatform/epm_db_passwd

Properties in the EPM_COMPONENTS configGroup, in the Default configProperty:

EPM components configuration

 

host

The host name of the front-end Web server or load balancer.

example2.com

port

The port number of the front-end Web server or load balancer. This is a subentry to the Default property.

10621

isSSL

The flag indicating whether the front end is in SSL mode. Valid values are true and false.

false

SSLPort

The SSL port number of the front-end Web server or load balancer

10218

Properties in the WORKSPACE_APP configProperty:

Workspace configuration.

 

host

The host name of the server hosting the Workspace Web application.

example.com

port

The port where the Workspace Web application is running.

10217

SSLPort

The SSL port (if configured for SSL) where the Workspace Web application is running.

10218

Properties in the EPM_COMPONENTS configGroup, in the WEB_SERVER configProperty:

Web server configuration

host

The host name of the Web server that the Web application is configured to use.

example.com

port

The port where the Web application is running.

10217

isSSL

The flag indicating whether the front end is in SSL mode. Valid values are true and false.

false

Properties in the EPM_COMPONENTS configGroup, in the CALC_WEBAPP configProperty:

EPM components configuration

host

The host name of the server hosting the Oracle Calculation Manager Web application.

example.com

port

The port where the Oracle Calculation Manager Web application is running.

10217

SSL_Port

The SSL port (if configured for SSL) where the Oracle Calculation Manager Web application is running.

10218

name

The name of the Oracle Essbase cluster. There may be more than one cluster.

EssbaseCluster-1

Properties in the essbaseservern configProperty:

Oracle Essbase server

host

The host name of the Oracle Essbase server.

example.com

arborPath

The ARBORPATH of the Oracle Essbase server.

/scratch/oracle/shared_essbase

ess_AppLocation

The location of the Oracle Essbase application location.

/scratch/biplatform/instances/instance1/Essbase/essbaseserver1

agent_PortNumber

The agent port number of the Oracle Essbase server.

9511

agent_StartPort

The start of the range of ports used by the agent for Oracle Essbase server.

9000

agent_StopPort

The end of the range of ports used by the agent for Oracle Essbase server.

9499

Properties in the BIEE_WEBAPP configProperty:

Oracle BI EE Web application configuration

host

The host name of the server hosting the Oracle BI EE Web application.

example.com

port

The port where the Oracle BI EE Web application is running.

10217

SSL_Port

The SSL port (if configured for SSL) where the Oracle BI EE Web application is running.

10218

Properties in the PROVIDER_SERVICES_WEB_APP configProperty:

The Oracle Essbase APS Web application configuration

host

The host name of the server hosting the Oracle Essbase APS Web application.

example.com

port

The port where the Oracle Essbase APS Web application is running.

10217

SSL_Port

The SSL port (if configured for SSL) where the Oracle Essbase APS Web application is running.

10218

Properties in the PFINANCIAL_REPORTING_WEB_APP configProperty:

The Financial Reporting Web application configuration

host

The host name of the server hosting the Financial Reporting Web application.

example.com

port

The port where the Financial Reporting Web application is running.

10217

SSL_Port

The SSL port (if configured for SSL) where the Web application is running.

10218

Table 20-29 describes the move plan properties that you can change for Oracle BI Action Framework. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-29 Move Plan Properties for Oracle BI Action Framework

Property Description Sample Value

Property in the location-alias configGroup:

Action Framework configuration

 

alias_name

The URL corresponding to the action name.

Note that there may be more than one name/value pair.

http://example.com:9704/analytics

Table 20-30 describes the move plan properties that you can change for Oracle WebCenter Content Server, Oracle WebCenter Content: Records, and Oracle WebCenter Content: Inbound Refinery. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

You must edit the properties for each component under the appropriate componentType.

Table 20-30 Move Plan Properties for WebCenter Content Server, Records, and Inbound Refinery

Property Description Sample Value

Properties in componentType

The componentType is Webcenter Content - Records, Content Server, or Inbound Refinery.

 

MoveType

The flag indicating whether to copy the entire test system instance, including configuration and data, or to create a new content server instance, based on the test system configuration.

Valid values are copy and init.

This property is not applicable to Inbound Refinery.

copy

Properties in the copy configGroup:

Copy the configuration and data

IntradocDir

The path to the Intradoc directory. The directory value can begin with the string {domainHome} which will be substituted with the path of the domain home directory on the target system.

/scratch/oracle/config/domains/domain_name/ucm/cs
or
{domainHome}/ucm/cs

WeblayoutDir

The path to the Weblayout directory. The directory value can begin with the string {domainHome} which will be substituted with the path of the domain home directory on the target system.

This property may not be present if the WebLayoutDir is located in the default location, under the Intradoc directory.

/scratch/oracle/config/domains/domain_name/ucm/cs/weblayout
or
{domainHome}/ucm/cs/weblayout

VaultDir

The absolute path to the Vault directory. The directory value can begin with the string {domainHome} which will be substituted with the path of the domain home directory on the target system.

This property may not be present if the VaultDir is located in the default location, under the Intradoc directory.

/scratch/oracle/config/domains/domain_name/ucm/cs/vault
or
{domainHome}/ucm/cs/vault

UserProfilesDir

The absolute path to the user profiles directory. The directory value can begin with the string {domainHome} which will be substituted with the path of the domain home directory on the target system.

This property may not be present if it is located in the default location, under the Intradoc directory.

/scratch/oracle/config/domains/domain_name/ucm/cs/data/users/profiles
or
{domainHome}/ucm/cs/users/profiles

SocketHostAddressSecurityFilter

The security filter which lists the hosts that are allowed to directly access the server port. You can specify multiple values by separating them with a vertical bar (|).

127.0.0.1|0.0.0.0.0.0.0.1

Properties in the init configGroup:

Create a new instance with the configuration of the source.

SocketHostAddressSecurityFilter

The security filter which lists the hosts that are allowed to directly access the server port. You can specify multiple values by separating them with a vertical bar (|).

127.0.0.1|0.0.0.0.0.0.0.1

Table 20-31 describes the move plan properties that you can change for Oracle WebCenter Content: Imaging. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-31 Move Plan Properties for Oracle WebCenter Content: Imaging

Property Description Sample Value

AdminUser

Administrative user ID used during the pasteConfig operation to seed system security. If left blank, the domain administrator user provided on the pasteConfig command line is used. This property should be used for situations where the Imaging administrative user must be a user other than the domain administrator.

Admin2

Properties in the MBean Settings configGroup:

MBeans configuration

 

InputAgentInputDirectories

A comma-separated list of directories where input sources look for work.

IPM/InputAgent/Input

InputSampleDirectory

The directory that holds the sample data for the input UI.

IPM/InputAgent/Input/Sample

RenderGDFontPath

Location of the TrueType (TTF) font files used by the OIT rendering package.

/usr/share/X11/fonts/TTF

Properties in the UCM Connection configGroup:

The WebCenter Content connection configuration

 

repository.machine

The location of the repository. The value must be localhost if the connection is configured for "Use Local Content Server."

localhost

repository.port

The WebCenter Content server port used when the local content server is used. If not using local content server connection, remove the configuration property.

4444

repository.useSSL

A flag that specifies whether the connection to WebCenter Content systems use SSL. Valid values are true or false.

false

Property in the WORKFLOW Connection configGroup:

The workflow connection configuration

 

bpel.front.address

The HTTP front-end address used in the Imaging SOA: Connection Settings UI.

http://example.com:8001

Table 20-32 describes the move plan properties that you can change for Oracle Data Integrator. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-32 Move Plan Properties for Oracle Data Integrator

Property Description Sample Value

JPS configuration file

The relative of absolute path of the JPS configuration file for JSE components.

config/fmwconfig/jps-config-jse.xml

Properties in the Master Repository configGroup:

Master repository configuration

 

Master Repository Id

Oracle Data Integrator master repository ID. It should be different than the ID for the source master repository.

502

SUPERVISOR password file

The absolute path of a secure file that contains the password for the ODI user SUPERVISOR.

/scratch/oracle/odi_passwd

Url

JDBC URL for connecting to the data server.

jdbc:oracle:thin:@hostname:1521:db2720

Schema name

The name of the schema in the target database where the target ODI repository will be created.

odi_master

Schema password file

The absolute path of a secure file that contains the password for the schema.

/scratch/oracle/odi_schema_passwd

Properties in the Physical Data Servers configProperty:

Data servers configuration

 

Schema name

The name of the schema for the database data servers or the directory location for file type data servers.

FG_Dir_Schema

Work Schema

The name of the Work schema for the database data servers or the directory location for file type data servers.

/tmp/FG_Dir_Schema

Url

JDBC URL for connecting to the data server.

jdbc:oracle:thin:@localhost:1521/example.com

User

User name for the physical data servers connection.

username

Password File

The absolute path of a secure file that contains the password for the user for the physical data servers connection.

/scratch/oracle/rpd_ds_conn_passwd

Properties in the Agents configProperty:

Agents configuration

 

Host name

The Agent host name.

localhost

Host port

The Agent host port number.

12311

Properties in the Work repositories configProperty:

Work repositories configuration

 

Work Repository Id

The ID for the work repository. It should be different than the ID for the source work repository.

2

Url

JDBC URL for connecting to the work repository.

jdbc:oracle:thin:@host.example.com:7089/DB7089

User

User name for connecting to the work repository.

username

Password File

The absolute path of a secure file that contains the password for the user for the physical data servers connection.

/scratch/oracle/odi_pds_passwd

Table 20-33 describes the move plan properties that you can change for Oracle Access Manager, Oracle Security Token Service, and Oracle Identity Connect. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-33 Move Plan Properties for Oracle Access Manager, Oracle Security Token Service, and Oracle Identity Connect

Property Description Sample Value

Properties in the Load Balancer configProperty:

Load Balancer-related configuration properties.

 

hostname

The name of the host for the Load Balancer.

example.com

port

The port number for the Load Balancer.

368

Properties in the ManagedServer configGroup:

The Managed Server-related configuration properties. Update the following property for all Managed Servers in the move plan.

 

ProxyPort

The port number for the proxy server.

5555

Properties in the OIM Connection Information configProperty:

Oracle Identity Manager-related configuration property. This property is present in the move plan when Oracle Access Manager and Oracle Identity Manager are integrated.

 

Host/Port

The URL, with the name of the host and the port number for Oracle Identity Manager.

http://example.com:7010

Properties in the LDAP configProperty:

The LDAP configuration. These properties are present in the move plan only if an embedded LDAP is not being used.

 

LDAP Url

The URL of the LDAP connection. It contains the host name and port number of the LDAP store.

ldap://example.com:3060

LDAP User

The Administrative user for the LDAP server.

cn=orcladmin

Password File

The absolute path of a secure file containing the password for the LDAP Admin user. You must provide a password file location, even if you are not changing the configuration.

/scratch/oam/ldap_passwd

Properties in the ServiceProviders configProperty:

Service Provider properties. This section of the move plan is present if Oracle Access Manager acts as one of the Service Providers for Oracle Identity Connect.

 

OAM_server_name

The URL, with the name of the host and the port number for the Oracle Access Manager server.

http://example.com:14101

Properties in the Applications configProperty:

Applications-related properties. This section of the move plan is present if Oracle Access Manager is present as one of the applications for Oracle Identity Connect.

 

ReturnURL

The return URL, reflecting the URL for the target Oracle Access Manager server.

example.com:5575

Properties in the MultiDataCenter configProperty:

Multiple data center properties.

 

ClusterID

The ID of the cluster. This must be a unique value. It cannot be the same ID as the source cluster. The value in the move plan is blank.

MyProdCluster

Table 20-34 describes the move plan properties that you can change for Oracle Adaptive Access Manager. Edit all properties, such as host names, port numbers, listen addresses, that have different values in the target environment.

Table 20-34 Move Plan Properties for Oracle Adaptive Access Manager

Property Description Sample Value

Properties in the ServerConfig configProperty:

The Oracle Adaptive Access Manager configuration properties.

 

OAM PrimaryServerHost/Port

The host name and port number of the primary server for Oracle Access Manager. This property is present if Oracle Adaptive Access Manager is integrated with an Oracle Access Manager instance.

example.com:5575

OAM Secondary Server Host/Port

The host name and port number of the secondary server for Oracle Access Manager. This property is present if Oracle Adaptive Access Manager is integrated with an Oracle Access Manager instance.

example.com:5560

OIM Managed Server Host/Port

The host name and port number of the Managed Server for Oracle Identity Manager. This property is present if Oracle Adaptive Access Manager is integrated with an Oracle Identity Manager instance.

example.com:5000

OAAM Login URL for OIM

The host name and port number of Oracle HTTP Server. This property is present if Oracle Adaptive Access Manager is integrated with an Oracle Identity Manager instance.

example.com:ohsport

Webservice URL for OTP UMS Service

The Web services URL. This property is present in the move plan if OTP User Messaging Service is enabled and use of ParlayX is disabled.

http://WebserviceURL/endpoint

Parlayx URL for OTP UMS Service

The ParlayX URL. This property is present in the move plan if both OTP User Messaging Service and use of ParlayX is enabled.

http://ParlayxURL/endpoint

SOAP KeyStore File Location

The location of the SOAP keystore. This property is present if SOAP Authentication is enabled and the configured SOAP Keystore is not located under the Domain home.

Note: If the SOAP Keystore is located under the Domain Home, the SOAP Keystore is migrated to the corresponding location under the Domain Home on the target.

/scratch/oaam/soapks.ks

Location for OAAM images folder(Native Integration)

The location of the Oracle Adaptive Access Manager images folder. This property is present in the move plan if SOAP Tracker is enabled and the configured OAAM image folder is not located under the Domain home.

Note: If the OAAM image folder is located under the Domain Home, the images folder is migrated to the corresponding location under the Domain Home on the target.

/scratch/oaam/oaam_images

System Config Keystore File Location

The location of the System Config Keystore. This property is present in the move plan if the System Config Keystore location is configured, but is not located under the Domain home.

Note: If the System Config Keystore is located under the Domain Home, the System Config Keystore is migrated to the corresponding location under the Domain Home on the target.

scratch/KS_loc2

System DB Keystore File Location

The location for the keystore having keys for securing configuration values in the database. This property is present in the move plan if the System DB Keystore location is configured, but is not located under the Domain home.

Note: If the System DB Keystore is located under the Domain Home, the System DB Keystore is migrated to the corresponding location under the Domain Home on the target.

/scratch/KS_loc3