This chapter describes the procedures for configuring server migration for the enterprise deployment.
This chapter contains the following sections:
Configure server migration for the WLS_SOA1 and WLS_SOA2 managed servers. With server migration configured, should failure occur, the WLS_SOA1 managed server restarts on SOAHOST2, and the WLS_SOA2 managed server restarts on SOAHOST1. The WLS_SOA1 and WLS_SOA2 servers listen on specific floating IPs that are failed over by Oracle WebLogic Server.
Perform the steps in the following sections to configure server migration for the managed servers.
Set up a user and tablespace for the server migration Leasing table using the create tablespace leasing command.
To set up a user and tablespace for the server migration Leasing table:
Create a tablespace called
Leasing. For example, log on to SQL*Plus as the
sysdba user and run the following command:
SQL> create tablespace Leasing logging datafile 'DB_HOME/oradata/orcl/leasing.dbf' size 32m autoextend on next 32m maxsize 2048m extent management local;
Create a user named
Leasing and assign to it the Leasing tablespace.
SQL> create user Leasing identified by password; SQL> grant create table to Leasing; SQL> grant create session to Leasing; SQL> alter user Leasing default tablespace Leasing; SQL> alter user Leasing quota unlimited on LEASING;
leasing.ddl file located in either of the following directories to your database node:
Connect to the database as the
leasing.ddl script in SQL*Plus.
Create a GridLink data source for the Leasing table from the Oracle WebLogic Server Administration Console.
To create a GridLink data source:
Log in to the Oracle WebLogic Server Administration Console.
If you have not already done so, in the Change Center, click Lock & Edit and click Next.
In the Domain Structure tree, expand Services, then select Data Sources.
On the Summary of Data Sources page, click New and select GridLink Data Source, and enter the following:
Enter a logical name for the data source in the Name field. For example, Leasing.
Enter a name for JNDI. For example, jdbc/leasing.
For the Database Driver, select For the Database Driver, select Oracle's Driver (Thin) for GridLink Connections Versions: 11 and later.
In the Transaction Options page, de-select Supports Global Transactions, and click Next.
In the GridLink Data Source Connection Properties Options screen, select Enter individual listener information and click Next.
Enter the following connection properties:
Service Name: Enter the service name of the database with lowercase characters. For a GridLink data source, you must enter the Oracle RAC service name. For example:
Host Name and Port: Enter the SCAN address and port for the RAC database being used. You can identify this address by querying the appropriate parameter in the database using the TCP Protocol:
SQL>show parameter remote_listener; NAME TYPE VALUE -------------------------------------------------- remote_listener string db-scan.mycompany.com
For Oracle Database 11g Release 1 (11.1), use the virtual IP and port of each database instance listener, for example:
custdbhost1-vip.mycompany.com (port 1521)
For Oracle Database 10g, use multi data sources to connect to an Oracle RAC database. For information about configuring multi data sources see Appendix A, "Using Multi Data Sources with Oracle RAC."
Port - The port on which the database server listens for connection requests.
Database User Name: Leasing
Password: For example: welcome1
Confirm Password: Enter the password again and click Next.
On the Test GridLink Database Connection page, review the connection parameters and click Test All Listeners. Here is an example of a successful connection notification:
Connection test for jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=db-scan.mycompany.com) (PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ps5soaedg.mycompany.com))) succeeded.
In the ONS Client Configuration page, do the following:
Select FAN Enabled to subscribe to and process Oracle FAN events.
Enter here also the SCAN address for the RAC database and the ONS remote port as reported by the database (example below) and click ADD:
[orcl@db-scan1 ~]$ srvctl config nodeapps -s ONS exists: Local port 6100, remote port 6200, EM port 2016
For Oracle Database 11g Release 1 (11.1), use the hostname and port of each database's ONS service, for example:
custdbhost1.mycompany.com (port 6200)
On the Test ONS Client Configuration page, review the connection parameters and click Test All ONS Nodes.
Here is an example of a successful connection notification:
Connection test for db-scan.mycompany.com:6200 succeeded.
In the Select Targets page, select SOA_Cluster as the target, and All Servers in the cluster.
Click Activate Changes.
Edit the Node Manager properties file on the two nodes where the servers are running. The
nodemanager.properties file is located in the following directory:
Add the following properties to enable server migration to work properly:
This property specifies the interface name for the floating IP (
eth0, for example).
Do not specify the sub interface, such as
eth0:2. This interface is to be used without the
:1. The Node Manager's scripts traverse the different
:X enabled IPs to determine which to add or remove. For example, the valid values in Linux environments are
ethn, depending on the number of interfaces configured.
This property specifies the net mask for the interface for the floating IP.
This property specifies whether or not to use a node's MAC address when sending ARP packets, that is, whether or not to use the
-b flag in the arping command.
Verify in the output of Node Manager (the shell where the Node Manager is started) that these properties are in use. Otherwise, problems may occur during migration. The output should be similar to the following:
... StateCheckInterval=500 Interface=eth0 NetMask=255.255.255.0 ...
The following steps are not required if the server properties (start properties) have been set and Node Manager can start the servers remotely.
If not done already, set the
StartScriptEnabled property in the
nodemanager.properties file to true. This is required to enable Node Manager to start the managed servers.
Start Node Manager on Node 1 and Node 2 by running the
startNodeManager.sh script, which is located in the
When running Node Manager from a shared storage installation, multiple nodes are started using the same
nodemanager.properties file. However, each node may require different
Interface properties. In this case, specify individual parameters on a per-node basis using environment variables. For example, to use a different interface (eth3) in SOAHOSTn, use the
Interface environment variable as follows:
SOAHOSTn> export JAVA_OPTIONS=-DInterface=eth3 and start Node Manager after the variable has been set in the shell.
Set the environment and superuser privileges for the
Ensure that the PATH environment variable includes the files listed in Table 14-1.
Grant sudo privilege to the WebLogic user ('oracle') with no password restriction, and grant execute privilege on the /sbin/ifconfig and /sbin/arping binaries.
For security reasons, sudo should be restricted to the subset of commands required to run the
wlsifconfig.sh script. For example, to set the environment and superuser privileges for the
Ask the system administrator for the sudo and system rights as appropriate to this step.
Make sure the script is executable by the WebLogic user ('oracle'). The following is an example of an entry inside /etc/sudoers granting sudo execution privilege for
oracle and also over
To grant sudo privilege to the WebLogic user ('oracle') with no password restriction, and grant execute privilege on the /sbin/ifconfig and /sbin/arping binaries:
Defaults:oracle !requiretty oracle ALL=NOPASSWD: /sbin/ifconfig,/sbin/arping
Configure server migration targets. Configuring Cluster Migration sets the
DataSourceForAutomaticMigration property to
To configure migration in a cluster:
Log into the Oracle WebLogic Server Administration Console (
adminPort is 7001 by default).
In the Domain Structure window, expand Environment and select Clusters. The Summary of Clusters page appears.
Click the cluster for which you want to configure migration (SOA_Cluster) in the Name column of the table.
Click the Migration tab.
Click Lock & Edit.
In the Available field, select the machine to which to allow migration and click the right arrow. In this case, select SOAHOST1 and SOAHOST2.
Select the data source to be used for automatic migration. In this case select the Leasing data source.
Click Activate Changes.
Set the Candidate Machines for Server Migration. You must perform this task for all of the managed servers as follows:
Click Lock and Edit
In Domain Structure window of the Oracle WebLogic Server Administration Console, expand Environment and select Servers.
Select the server for which you want to configure migration.
Click the Migration tab.
In the Available field, located in the Migration Configuration section, select the machines to which to allow migration and click the right arrow. For WLS_SOA1, select SOAHOST2. For WLS_SOA2, select SOAHOST1.
Select Automatic Server Migration Enabled and click Save.
This enables the Node Manager to start a failed server on the target node automatically.
For information on targeting applications and resources, see Appendix B, "Targeting Applications and Resources to Servers."
Click Activate Changes.
Restart the Administration Server and the servers for which server migration has been configured
To restart the Administration Server, use the procedure in Section 8.4.3, "Starting the Administration Server on SOAHOST1."
Click Customize this table in the Summary of Servers page, move Current Machine from the Available Window to the Chosen window to view the machine on which the server is running. This is different from the configuration if the server is migrated automatically.
To verify that Server Migration is working properly:
To test from Node 1:
Stop the WLS_SOA1 managed server.
kill -9 pid
pid specifies the process ID of the managed server. You can identify the pid in the node by running this command:
ps -ef | grep WLS_SOA1
Watch the Node Manager console: you should see a message indicating that WLS_SOA1's floating IP has been disabled.
Wait for the Node Manager to try a second restart of WLS_SOA1. Node Manager waits for a fence period of 30 seconds before trying this restart.
Once Node Manager restarts the server, stop it again. Now Node Manager should log a message indicating that the server will not be restarted again locally.
To test from Node 2:
Watch the local Node Manager console. After 30 seconds since the last try to restart WLS_SOA1on Node 1, Node Manager on Node 2 should prompt that the floating IP for WLS_SOA1 is being brought up and that the server is being restarted in this node.
Access the soa-infra console in the same IP.
You can also verify migration using the Administration Console:
Log into the Administration Console.
Click on Domain on the left console.
Click the Monitoring tab and then the Migration subtab.
The Migration Status table provides information on the status of the migration.
After a server is migrated, to fail it back to its original node/machine, stop the managed server from the Oracle WebLogic Administration Console and then start it again. The appropriate Node Manager starts the managed server on the machine to which it was originally assigned.